Home View Cart Register


AEM High Output IGBT Inductive "Smart" Coil IGN-1A


Add to Cart:

  • Model: 30-2853, IGN-A1
  • Manufactured by: AEM

This item is normally in stock & ships within 1-72 hours.

AEM Inductive "Smart" Coil are for applications that require the ignition coil(s) to have a built-in igniter. (NOT for use with ignition systems that already have external igniter) This is a performance coil also known as the IGN-A1

The tradeoff between adequate spark energy and adequate spark duration ends with AEM’s High-Output Inductive Coils, an inductive coil that delivers CDI-like spark energy and voltage and the long spark duration. Ideal for vehicles running high compression, high RPM, forced induction and/or nitrous engines.

Auto enthusiasts who have forced induction engines, high RPM engines or run nitrous oxide are aware of the compromises that come with using inductive coils instead of converting to a Capacitive Discharge Ignition system (CDI). While inductive coils deliver a long spark duration with simplicity, they lack the energy to adequately ignite the mixture in the combustion chamber of a highly modified performance vehicle. Conversely, CDIs deliver an intense burst of spark energy, but with practically no spark duration, which makes having the proper air/fuel mixture in the combustion chamber paramount for best performance. This compromise ends with AEM’s High-Output IGBT “Smart” Inductive Coils.

AEM’s High-Output, Insulated Gate Bipolar Transistor (IGBT) “Smart” Inductive Coils are designed for use on applications that do not have an external igniter.

AEM High-Output Inductive Coils each deliver over 100mJ of spark energy and a minimum of 40,000 Volts—as much as most CDI systems, without the need for a CDI module. They also provide very long spark duration at full energy, unlike CDI systems and multiple spark systems which fire off small spark events prior to and after their CDI burst to mimic longer spark duration.

Massive Spark Energy, up to 103 mJ
Incredibly long spark duration, up to 2.9mS
Up to 40kV Output Voltage, without using a CDI
Deliver CDI-like spark energy—No CDI Module needed
Cost less than aftermarket LS1 coils
Can be mounted almost anywhere
Weather and Shockproof design
Can be mounted directly to the Engine

Output (no load): 40kV minimum
Output (50pF load): 40kV +/- 10%
Output Energy: 103 mJ +/- 7%
Peak Secondary Current: 102 mA +/- 10%
Arc Duration: 2.9mS +/- 10%
Turns Ratio 71:1
Maximum Current: 19 Amps
Maximum Battery Voltage: 17 Volts
Base Dwell: 3.0 mS
Max Continuous Dwell: 9 mS but don’t exceed 40% duty cycle
Max Intermittent Dwell: 80% duty cycle, 5 seconds maximum
Mating Connector: Packard/Delphi 12162825 “Pull to Seat”
Mating Contacts: Packard/Delphi 12124075 “Pull to Seat”
High Tension Wire Terminal: HEI “spark plug top” Style

Mercury 8M0077473 

Copyright © 2005-2020. All rights reserved www.himniracing.com
Terms of use