Home View Cart Register

GT Oil Feed Fitting w/ Restrictor : -4 an GT BB Turbos

$14.95



Add to Cart:   
  • Model: F12L021
  • Manufactured by: Himni Racing

Custom machined Oil inlet / feed fitting for Garrett GT Ball Bearing Turbos. Screws right into the turbos listed below & works with any -4 AN line. Has a built-in oil restrictor to supply the GT turbos the amount of oil they need while keeping your oil pressure up. Too much oil feed can blow the turbo's seals. **Also for use on the Garrett T ball bearing turbos**

Note:: The use of this fitting / restrictor is highly recommended. The Garrett GT series turbos do not require as much oil to be fed to the bearings, compared to the old T Series turbos.

The benefits of use include:
Protects the turbo's seals from excessive oil feed.
No more oil pressure drop. (allows your engine to maintain a higher oil pressure)
A simple & secure way to attach a standard -4 AN oil feed line.

Fits the turbos below:
GT28R, GT28RS, GT2871R, GT2876R / GT25/40R, GT30R, GT3071R, GT3076R, GT3040R, GT35R & More.



  
bottom
Copyright © 2005-2017. All rights reserved www.himniracing.com
Terms of use