T25/T28 Turbine Housing - GT28RS/ GT2871R/ GT2876R

Replacement exhaust / turbine housing for the Garrett GT28RS, GT2871R, GT2876R & GTX Turbos.

This is a T25/T28 inlet (exhaust manifold side) with built in internal wastegate (T25 / T28 with 5 bolt downpipe side). Direct bolt on & replaces / upgrades your existing housing. Your choice Of A/R.

Installing & replacing your turbine housing is very simple. Once the turbo is removed from the car, the new housing is installed by simply removing the (6) 1/2" mounting bolts holding the turbine housing to the center cartridge. The old housing then slips right off & the new housing goes back on in the reverse order. Some applications do not require that the whole turbo even be removed from the car depending on available space & leverage. This is a 1 out of 10 in difficulty.

Turbine housings are often changed or replaced for various reasons such as:
- To allow the turbo to be used with a new application, exhaust manifold or downpipe.
- To obtain a more desirable A/R size for your application.
GARRETT TURBO FITMENT:
- GT28RS
- GT2860RS
- GT2871R
- GT2876R
- GTX2860R
- GEN2 GTX2860R
- GTX2863R
- GTX2867R
- GEN2 GTX2867R
- GTX2871R

Garrett Part numbers: 430609-0230, 430609-5231