T3 5 Bolt Turbine Housing - P Trim T04E, T04S, T04R, T04Z

This item is normally in stock & ships within 1-72 hours.

Turbine / Exhaust Housing, T3 undivided 5 bolt downpipe outlet. Fits all P trim turbos.

- Housing Type: Turbine/Exhaust
- A/R Available Sizes: .63 or .82
- Inlet Pattern (manifold side): T3 Undivided
- Outlet/Discharge/Exist Pattern (downpipe side): 2.5" 5 Bolt
- Works w/ WasteGate Type: Internal or External
- Applications: All Garrett Turbos w/ P-Trim Turbine wheel, such as:
T04E, T04S, 60-1, T04R, T66, T67, T04Z, etc

This is the exhaust/turbine housing only. T3 undivided inlet (exhaust manifold side) with 5 bolt exit. (downpipe side) Direct bolt on & replaces/upgrades your existing T3 P trim turbo housing. Pick A/R from menu. Options are: .63, .82 A/R

Installing & replacing your turbine housing is very simple. Once the turbo is removed from the car, the new housing is installed by simply removing the (6) 1/2" mounting bolts holding the turbine housing to the center cartridge. The old housing then slips right off & the new housing goes back on in the reverse order. Some applications do not require that the whole turbo even be removed from the car depending on available space & leverage. This is a 1 out of 10 in difficulty.

Turbine housings are often changed or replaced for various reasons such as:
- To allow the turbo to be used with a new application, exhaust manifold or downpipe.
- To obtain a more desirable A/R size for your application.