T4 3.00" V-band Turbine Housing - Garrett GT4088R, GT4094R

Turbine / Exhaust Housing, T4 with 3" V-band downpipe outlet for Garrett GT40R, GT4088R, GT4094R.

This is the exhaust/turbine housing only. Large T4 (T04) divided inlet (exhaust manifold side) with 3.00" V-Band exit. (downpipe side) Direct bolt on & replaces/upgrades your existing housing. Pick A/R from menu. Options are: .85, .95, 1.06, 1.19 A/R

Note: If you have the journal bearing GT4088, be sure to check the box so that the correct housing will be sent to you.

Installing & replacing your turbine housing is very simple. Once the turbo is removed from the car, the new housing is installed by simply removing mounting bolts holding the turbine housing to the center cartridge. The old housing then slips right off & the new housing goes back on in the reverse order. Some applications do not require that the whole turbo even be removed from the car depending on available space & leverage. This is a 1 out of 10 in difficulty.

Turbine housings are often changed or replaced for various reasons such as:
- To allow the turbo to be used with a new application, exhaust manifold or downpipe.
- To obtain a more desirable A/R size for your application.

Part Numbers:
448375-0018 (OR 773628-0010) = .85 A/R T4 T4 DIVIDED
448375-0019 (OR 773628-0011) = .95 A/R T4 DIVIDED
448375-0020 (OR 773628-0012) = 1.06 A/R T4 DIVIDED
448375-0021 (OR 773628-0013) = 1.19 A/R T4 DIVIDED