T4 V-band Turbine Housing - P-Trim - T Turbos

Replacement T4 (T04) exhaust / turbine housings that fits all Garrett P-trim T series turbos. ( Such as T04E, 60-1, T04S, T04R, T04Z, T67 & so on) This housing has a 3.00" V-band downpipe outlet.

Your choice of A/R. Direct bolt on & replaces / upgrades your existing housing. Options include:

Undivided with .68 A/R
Undivided with .81 A/R
Undivided with .96 A/R

Installing & replacing your turbine housing is very simple. Once the turbo is removed from the car, the new housing is installed by simply removing the (6) 1/2" mounting bolts holding the turbine housing to the center cartridge. The old housing then slips right off & the new housing goes back on in the reverse order. Some applications do not require that the whole turbo even be removed from the car depending on available space & leverage. This is a 1 out of 10 in difficulty.

Turbine housings are often changed or replaced for various reasons such as:
- To allow the turbo to be used with a new application, exhaust manifold or downpipe.
- To obtain a more desirable A/R size for your application.