Garrett 40mm GVW-40 External Wastegate Kit BLACK P/N: 908827-0003
- Brand: Garrett Advancing Motion
- Product: External Wastegate / EW
- Full Kit Includes: Waste Gate, Inlet/Outlet Flanges, Inlet/Outlet Clamps, Fittings & Hardware
- Base Spring Pressure: 14.5 PSI
- Interchangeability: Direct Replacement For TiAL MVS 38mm, Turbosmart 40mm, Precision 39mm
- Availability: This item is usually in stock and ships within 1-48 hours.
Available in three sizes: 40mm | 45mm | 50mm and four color combinations: Red | Blue | Black | Silver. The valve housing is cast from high temp stainless steel and rated for exhaust temperatures up to 1050° C. CFD optimized for maximum flow and thermal efficiency. Our Nomex reinforced elastomer diaphragm provides exceptional durability and fatigue resistance. GVW wastegates are set to 1 Bar | 14.5 PSI of base pressure and can be configured from 0.2 Bar | 2.9 PSI - 1.7 Bar | 24.7 PSI (considering 1:1 backpressure). The actuator design allows for multiple air/liquid fitting orientations. All fasteners, springs, fittings, V-bands, clamps, and flanges included.
The Garrett Vent | External Wastegates regulate turbocharger shaft speed by venting exhaust gas around the turbine stage of the turbocharger. CFD optimized design maximizes flow and delivers optimum boost control. Advanced thermal optimization increases durability of the diaphragm. The cap design makes spring changes and serviceability of the entire GVW lineup easier and more reliable to perform.
$317.00Garrett 40mm GVW-40 External Wastegate Kit BLUE P/N: 908827-0002
- Brand: Garrett Advancing Motion
- Product: External Wastegate / EW
- Full Kit Includes: Waste Gate, Inlet/Outlet Flanges, Inlet/Outlet Clamps, Fittings & Hardware
- Base Spring Pressure: 14.5 PSI
- Interchangeability: Direct Replacement For TiAL MVS 38mm, Turbosmart 40mm, Precision 39mm
- Availability: This item is usually in stock and ships within 1-48 hours.
Available in three sizes: 40mm | 45mm | 50mm and four color combinations: Red | Blue | Black | Silver. The valve housing is cast from high temp stainless steel and rated for exhaust temperatures up to 1050° C. CFD optimized for maximum flow and thermal efficiency. Our Nomex reinforced elastomer diaphragm provides exceptional durability and fatigue resistance. GVW wastegates are set to 1 Bar | 14.5 PSI of base pressure and can be configured from 0.2 Bar | 2.9 PSI - 1.7 Bar | 24.7 PSI (considering 1:1 backpressure). The actuator design allows for multiple air/liquid fitting orientations. All fasteners, springs, fittings, V-bands, clamps, and flanges included.
The Garrett Vent | External Wastegates regulate turbocharger shaft speed by venting exhaust gas around the turbine stage of the turbocharger. CFD optimized design maximizes flow and delivers optimum boost control. Advanced thermal optimization increases durability of the diaphragm. The cap design makes spring changes and serviceability of the entire GVW lineup easier and more reliable to perform.
$317.00Garrett 40mm GVW-40 External Wastegate Kit RED P/N: 908827-0001
- Brand: Garrett Advancing Motion
- Product: External Wastegate / EW
- Full Kit Includes: Waste Gate, Inlet/Outlet Flanges, Inlet/Outlet Clamps, Fittings & Hardware
- Base Spring Pressure: 14.5 PSI
- Interchangeability: Direct Replacement For TiAL MVS 38mm, Turbosmart 40mm, Precision 39mm
- Availability: This item is usually in stock and ships within 1-48 hours.
Available in three sizes: 40mm | 45mm | 50mm and four color combinations: Red | Blue | Black | Silver. The valve housing is cast from high temp stainless steel and rated for exhaust temperatures up to 1050° C. CFD optimized for maximum flow and thermal efficiency. Our Nomex reinforced elastomer diaphragm provides exceptional durability and fatigue resistance. GVW wastegates are set to 1 Bar | 14.5 PSI of base pressure and can be configured from 0.2 Bar | 2.9 PSI - 1.7 Bar | 24.7 PSI (considering 1:1 backpressure). The actuator design allows for multiple air/liquid fitting orientations. All fasteners, springs, fittings, V-bands, clamps, and flanges included.
The Garrett Vent | External Wastegates regulate turbocharger shaft speed by venting exhaust gas around the turbine stage of the turbocharger. CFD optimized design maximizes flow and delivers optimum boost control. Advanced thermal optimization increases durability of the diaphragm. The cap design makes spring changes and serviceability of the entire GVW lineup easier and more reliable to perform.
$317.00Garrett 40mm GVW-40 External Wastegate Kit SILVER P/N: 908827-0004
- Brand: Garrett Advancing Motion
- Product: External Wastegate / EW
- Full Kit Includes: Waste Gate, Inlet/Outlet Flanges, Inlet/Outlet Clamps, Fittings & Hardware
- Base Spring Pressure: 14.5 PSI
- Interchangeability: Direct Replacement For TiAL MVS 38mm, Turbosmart 40mm, Precision 39mm
- Availability: This item is usually in stock and ships within 1-48 hours.
Available in three sizes: 40mm | 45mm | 50mm and four color combinations: Red | Blue | Black | Silver. The valve housing is cast from high temp stainless steel and rated for exhaust temperatures up to 1050° C. CFD optimized for maximum flow and thermal efficiency. Our Nomex reinforced elastomer diaphragm provides exceptional durability and fatigue resistance. GVW wastegates are set to 1 Bar | 14.5 PSI of base pressure and can be configured from 0.2 Bar | 2.9 PSI - 1.7 Bar | 24.7 PSI (considering 1:1 backpressure). The actuator design allows for multiple air/liquid fitting orientations. All fasteners, springs, fittings, V-bands, clamps, and flanges included.
The Garrett Vent | External Wastegates regulate turbocharger shaft speed by venting exhaust gas around the turbine stage of the turbocharger. CFD optimized design maximizes flow and delivers optimum boost control. Advanced thermal optimization increases durability of the diaphragm. The cap design makes spring changes and serviceability of the entire GVW lineup easier and more reliable to perform.
$317.00TiAL 38mm External Wastegate Gasket fits TiAL 35mm, 38mm, F38 2 Bolt waste gates & Turbonetics Deltagate. Reusable & made of stainless steel. Very durable & does not blow out like other gaskets. Used on both gate inlet (manifold side) & outlet. (dump tube side)
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Select Spring Pressure & color from menu.
The most commonly used TiAL wastegate. Has heavy duty 347 SS alloy used in valve and valve housing. 17-7 PH SS actuator spring and high temperature silicone Nomex reinforced actuator diaphragm gives rock solid boost stability. Has superior product life under the most demanding conditions. (Turbo rotary applications 2000F (1093C) exhaust temperatures, etc.)
Comes complete with:
TiAL 38mm Wastegate
Valve seat (Inlet sealing ring)
10mm banjo air fittings
Gaskets
Stainless steel hardware.
Other Features include::
High temperature silicone Nomex reinforced actuator diaphragm rated to 4 Bar
17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resists "relaxing" at high temperatures
- Nitronic 60 Stainless Steel is used for the valve seat, valve bushing, and lower housing fastening hardware.
Note:: The water cooling on the Tial MVR is not a mandatory hook up. Only an added available option if you want to use liquid cooling.
This MV-S-A 38mm unit is designed specifically for motorsport applications that can't utilize the water cooling ports on the standard MV-S wastegate. The MV-S-A or "long neck" / "tall boy" has the standard 38mm valve but also has five heat fins that separate the casting from the actuator top. Born into the world of Motorsport this wastegate can handle the harshest of conditions and give 100% performance 100% of the time. It is the choice wastegate of many WRC teams. Your Choice of Polished Silver, Red, Blue, Black or Purple.
Included with every Tial MV-S-A:
- MV-S-A wastegate Assembly
- 2 TiAL -4 AN removable water fittings
- MV-S Valve Seat
- Inlet V-band clamp & Flange
- Outlet V-Band Clamp & Flange
- 2 TiAL Air Fittings
- Plugs for unused air ports
- Extra actuator springs
- High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs.
- High temperature silicone Nomex reinforced actuator diaphragm.
- 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C).
- Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing.
- All Stainless Steel hardware.
- Mating weld flanges are 304L
- Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black).
- 3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports.
- V-Band inlet and outlet make install easy, flanges and clamps are in the box
- Integrated -4 AN water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. These are leak tested after installation from the factory and can be removed if not utilized.
- Five heat sinks raise the actuator top away from the casting to dissipate heat when water cooling can not be used
- Designed for Motorsport/Road Racing
::: NOTE:: Select Spring Pressure & color from menu.
$410.00Note:: The water cooling on the Tial MVS is not a mandatory hook up. Only an added available option if you want to use liquid cooling.
The TiAL MV-S (aka V38) external wastegate has the same flow capability as the standard Tial 38mm (F38) wastegate but with V-band inlet & outlet mountng. With it's new compact design, fitment into tight spaces is no longer a issue. The V-band mounting found on the new V38 (And V44/V60) provides maximum positioning possibilities & allows the wastegate to be installed & removed quickly & easily, in needed. It can be rotated 360 degrees to any position that suits your needs. Another advantage is that it does not require the use of gaskets. Just like the rest of the TiAL product line, it comes with their legendary performance & reliability. Your Choice of Polished Silver, Red, Blue, Black or Purple.
Has heavy duty 347 SS alloy used in valve and valve housing. 17-7 PH SS actuator spring and high temperature silicone Nomex reinforced actuator diaphragm gives rock solid boost stability. Has superior product life under the most demanding conditions. (Turbo rotary applications 2000F (1093C) exhaust temperatures, etc.)
Comes complete with:
TiAL V38 38mm V-band Wastegate (Your Choice of color)
Valve seat (Inlet sealing ring) - Stainless Steel
V-band Inlet & Outlet Flanges- Stainless Steel
V-band Inlet & Outlet Clamps - Stainless Steel
Air fittings & block off plugs.
Stainless steel hardware.
High temperature silicone Nomex reinforced actuator diaphragm rated to 4 Bar
17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resists "relaxing" at high temperatures
- Nitronic 60 Stainless Steel is used for the valve seat, valve bushing, and lower housing fastening hardware.
Compact Design
Leak-Free V-Band mounting (no gaskets needed)
::: NOTE:: Select Spring Pressure & color from menu.
$299.00Note:: The water cooling on the Tial MVR is not a mandatory hook up. Only an added available option if you want to use liquid cooling.
The new TiAL MV-R 44mm external wastegate has the same flow capability as the standard Tial 44mm (V44) wastegate but in a new lighter weight more compact size. Fitment into very tight spaces is now posable & get this.... it's water cooled too! It comes with water ports that flow a small amount of water through the actuator top to keep the temperatures down in extreme conditions such as road racing & rotary engines. However, the wastegate may also be used without the water cooling if your application doesn't need it. (water port plugs included)
The 44mm MV-R is completely interchangeable with Tial's standard 44mm V44 allowing it to be installed to any application where a V44 was normally used.
The V-band mounting found on the new 44mm MVR provides maximum positioning possibilities & allows the wastegate to be installed & removed quickly & easily if needed. It can be rotated 360 degrees to any position that suits your needs & does not require the use of gaskets. Just like the rest of the TiAL product line, it comes with their legendary performance & reliability. Your Choice of Polished Silver, Red, Blue, Black or Purple.
Has heavy duty 347 SS alloy used in valve and valve housing. 17-7 PH SS actuator spring and high temperature silicone Nomex reinforced actuator diaphragm gives rock solid boost stability. Has superior product life under the most demanding conditions. (Turbo rotary applications 2000F (1093C) exhaust temperatures, etc.)
Comes complete with:
TiAL MV-R V-band Wastegate (Your Choice of color)
Valve seat (Inlet sealing ring) - Stainless Steel
V-band Inlet & Outlet Flanges- Stainless Steel
V-band Inlet & Outlet Clamps - Stainless Steel
Air fittings
Plugs included for unused air ports
Stainless steel hardware.
High temperature silicone Nomex reinforced actuator diaphragm rated to 4 Bar
17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resists "relaxing" at high temperatures
- Nitronic 60 Stainless Steel is used for the valve seat, valve bushing, and lower housing fastening hardware.
Compact Design
Leak-Free V-Band mounting (no gaskets needed)
::: NOTE:: Select Spring Pressure & color from menu.
$367.90It's here! The V60 is TiAL's largest wastegate with a Huge 60mm design. This wastegate utilizes all of the high quality materials & manufacturing that has made Tial products legendary. The gate uses a interlocking V-band inlet & outlet that requires no use of gaskets, while still providing a leak-free seal. As with all the Tial wastegates, it will reliably control boost even under the most extreme conditions. The V60 is a perfect choice for use with high boost, big turbo applications.
Comes With Everything Needed:
V60 (60mm) Wastegate (select color)
Inlet & Outlet stainless steel V-Band Flanges
Inlet & Outlet stainless steel V-Band Clamps
Stainless Steel Valve Seat
2 Air / Hose Fittings with copper washers
Installation Instructions
Wastegate spring for use with:
Tial 35mm, 38mm (F38 w/ 2 bolt flange),
Tial 44mm V44 (old school discontinued 44mm wastegate with large top hat)
Tial 46mm F46 (4 bolt flange w/ large top hat)
Tial 60mm V60 (largest Tial gate)
"Small" Tial Wastegate Springs. Choose Small Red, Small Yellow, Small Green, or Small Blue. Can be combined with the TiAL "Big" springs to reach desired boost pressure.
::Note:: Below is a cart for you to use as a reference in selecting the proper spring for your particular size Tial wastegate. (though the springs don't very, how they react in a given size wastegate does)
Tial 35mm, 38mm (F38) & 41mm (F41) Wastegates:
Small Yellow = .25 bar (3.63 psi)
Small Red = .4 bar (5.80 psi)
Small Green = .5 bar (7.25 psi)
Small Blue = .6 bar (8.70 psi)
Tial 44mm (V44), 46mm (F46) & 60mm (V60) Wastegates:
Small Yellow = .2 bar (2.90 psi)
Small Red = .3 bar (4.35 psi)
Small Green = .4 bar (5.80 psi)
Small Blue = .5 bar (7.25 psi)
Wastegate spring for use with:
Tial 35mm, 38mm (F38 w/ 2 bolt flange),
Tial 44mm V44 (old school discontinued 44mm wastegate with large top hat)
Tial 46mm F46 (4 bolt flange w/ large top hat)
Tial 60mm V60 (largest Tial gate)
"Big" Tial Wastegate Springs. Choose Big Red, Big Yellow, Big Green, or Big Blue. Can be combined with the TiAL "Small" springs to reach desired boost pressure.
::Note:: Below is a cart for you to use as a reference in selecting the proper spring for your particular size Tial wastegate. (though the springs don't very, how they react in a given size wastegate does)
Tial 38mm (F38) & 41mm (F41) Wastegates:
Big Yellow = .7 bar (10.15 psi)
Big Red = .8 bar (11.60 psi)
Big Green = .9 bar (13.05 psi)
Big Blue = 1 bar (14.50 psi)
Tial 44mm (V44), 46mm (F46) & 60mm (V60) Wastegates:
Big Yellow = .6 bar (8.70 psi)
Big Red = .7 bar (10.15 psi)
Big Green = .8 bar (11.60 psi)
Big Blue = .9 bar (13.05 psi)
Tial Waste gate Springs for use with: TiAL 38mm MVS (V-band 38mm wastegate) TiAL 44mm MVR (compact 44mm wastegate)
Not for use w/ with the older style standard Tial gates (2 bolt flange F38, 4 bolt flanged 41 & 46mm, V-band V44 w/ large top hat) These springs are used to change the amount of boost pressure your turbo produces. Pick your spring or spring combination based on the amount of boost you want your engine to see.
Spring Pressures for MVS (V38) Application
SPRING COMBINATIONS
BAR_________PSI_____Color
0.3 ________4.35 ___BROWN
0.4 ________5.80 ___GOLD
0.5 ________7.25 ___BIEGE
0.6 ________8.70 ___GREY
0.7 ________10.15 __GOLD + BROWN
0.8 ________11.60 __COPPER + BROWN
0.9 ________13.05 __GREY + BROWN
1.0 ________14.50 __GREY + GOLD
1.1 ________15.95 __MAROON + BEIGE
1.2 ________17.40 __COPPER + MAROON
1.3 ________18.85 __GREY + GOLD + BROWN
1.4 ________20.30 __COPPER + MAROON + BROWN
1.5 ________21.75 __GREY + MAROON + BROWN
1.6 ________23.20 __COPPER + MAROON + BEIGE
1.7 ________24.66 __GREY + MAROON + BEIGE
Spring Pressures for MVR (NEW 44MM) Application
SPRING COMBINATIONS
BAR ____PSI ____Color
0.3 ____4.35 ___GOLD
0.4 ____5.80 ___MAROON
0.5 ____7.25 ___BROWN + GOLD
0.6 ____8.70 ___BROWN + MAROON
0.7 ____10.15 __GREY + GOLD
0.8 ____11.60 __GREY + MAROON
0.9 ____13.05 __BROWN + GOLD + GREY
1.0 ____14.50 __BROWN + MAROON + GREY
1.1 ____15.95 __BEIGE + GOLD + GREY
1.2 ____17.40 __MVR PLAIN + COPPER + GOLD + BROWN
1.3 ____18.85 __MVR PLAIN + COPPER + MAROON + BROWN
1.4 ____20.30 __MVR PLAIN + GREY+ GOLD + BEIGE
1.5 ____21.75 __MVR PLAIN + GREY + MAROON + BEIGE
TiAL threaded INLET (MANIFOLD SIDE) 38mm 2 bolt external waste gate mounting flange. Commonly used for making custom exhaust manifolds, etc. Available in your choice of mild or stainless steel.
- Brand: TiAL
- Application: Manifold / wastegate INLET side. (not outlet/ dump tube side)
- Fitment: Tial 35mm, 38mm external wastegate & Turbonetics Deltagate.
- Flange Side #1: Smooth flat face.
- Flange Side #2: Recessed groove for pipe/tube alinement & welding.
- Bolt Pattern: 2 Bolt threaded w/ 8mm x 1.25 thread size.
- Material Type: Mild Carbon Or Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
TiAL drilled OUTLET (Dump Tube Side) 38mm 2 bolt external waste gate mounting flange. Used for mounting an outlet/dump tube/"screamer pipe" to the outlet side of the waste gate. Available in your choice of mild or stainless steel.
- Brand: TiAL
- Application: Dump tube / wastegate OUTLET side.
- Fitment: Tial 35mm, 38mm external wastegate & Turbonetics Deltagate.
- Flange Side #1: Smooth flat face.
- Flange Side #2: Recessed groove for pipe/tube alinement & welding.
- Bolt Pattern: 2 Bolt drilled though for use w/ 8mm bolts/studs.
- Material Type: Mild Carbon Or Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
Made In USA
Himni Racing converter/adapter mounting flange is used to bolt the TiAL V-band 38mm MVS (V38) waste gate to exhaust manifolds/headers designed for the standard TiAL 2 bolt (F38) 38mm wastegates. (or vise a versa) Because the mounting flanges are different on the 2 wastegates, this wasn't possible until now. No welding required, simply bolt the converter to your manifold, then bolt the wastegate to the adapter.
- Brand: HIMN'I Racing
- Adapter Side #1: Tial 38mm F38 2 bolt wastegate
- Adapter Side #2: Tial 38mm MVS V-Band
- Overall Thickness/Height: Ultra tight .75" claerance
- Material Type: Mild Carbon Steel
- Finish: Excellent, Raw, Smooth
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
HR external wastegate bock off flange/plate for Tial 38mm/35mm & Turbonetics Deltagate external wastegate. Great for blocking off the wastegate opening on turbo manifolds when using internal wastegate turbo(s). 3/8" thick to prevent warping in high temperature applications. Made in the USA.
$12.70Adapter flange for Tial 38mm or Turbonetics deltagate wastegate. It rotates the wastegate placement 90 degrees. Has countersunk mounting points for original location & allows the gate to mount leek-free.
$32.98Made In USA
Himni Racing converter/adapter mounting flange is used to bolt the TiAL V-band 44mm (MVR & V44 waste gate to exhaust manifolds/headers designed for the standard TiAL 2 bolt (F38) 38mm wastegates. (or vise a versa) Because the mounting flanges are different on the 2 wastegates, this wasn't possible until now. No welding required, simply boltthe converter to your manifold, then bolt the wastegate to the adapter.
- Brand: HIMN'I Racing
- Adapter Side #1: Tial 38mm F38 2 bolt wastegate
- Adapter Side #2: Tial 44mm V44 & MVS V-Band
- Overall Thickness/Height: Ultra tight .75" claerance
- Material Type: Mild Carbon Steel
- Finish: Excellent, Raw, Smooth
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Made In USA
Himni Racing converter/adapter mounting flange is used to bolt the TiAL 44mm (MVR, V44) waste gate to exhaust manifolds/headers designed for the Turbonetics Deltagates. (or vise a versa) Because the mounting flanges are different on the 2 wastegates, this wasn't possible until now. No welding required, simply boltthe converter to your manifold, then bolt the wastegate to the adapter.
- Brand: HIMN'I Racing
- Adapter Side #1: Turbonetics 2 bolt Deltagate
- Adapter Side #2: Tial 44mm V44 & MVS V-Band
- Overall Thickness/Height: Ultra tight .75" claerance
- Material Type: Mild Carbon Steel
- Finish: Excellent, Raw, Smooth
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
TiAL Stainless Steel INLET (manifold side) V-band clamp for TiAL V38 38mm MVS V-band external wastegate. Used to mount the wastegate to a turbo manifold/header. Includes lock nut & bolt.
- Brand: TiAL
- Application: Tial 38mm MVS wastegate inlet side
- Material Type: Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
TiAL stainless steel replacement V-band INLET mounting flange for the Tial 38mm V38 MVS V-band external wastegate. Used to mount the V38 wastegate to turbo exhaust manifolds/headers.
- Brand: TiAL
- Application: Tial 38mm MVS wastegate inlet side
- Material Type: Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
TiAL Stainless Steel Outlet (dump tube side) V-band clamp for TiAL V38 38mm MVS V-band external wastegate. Used to mount the dump tube outlet flange to the waste gate.
- Brand: TiAL
- Application: Tial 38mm MVS wastegate outlet side
- Material Type: Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
TiAL stainless steel replacement V-band OUTLET flange for the Tial 38mm V38 MVS external V-band wastegate. Used to mount the outlet dump tube to the V38 waste gate.
- Brand: TiAL
- Application: Tial 38mm MVS wastegate outlet side
- Material Type: Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
Himni Racing 90 degree double flanged elbow for TiAL 38mm MVS external wastegates. Perfect for repositioning the waste gate in relation to the manifold & surrounding components. Made of 100% 304 stainless steel. Flanged on both sides for Tial 44mm waste gates. Built from heavy duty TiAL stainless flanges and thick-wall stainless pipe. Extremely durable & hi flow. Nice TIG welded construction. Used on the inlet side of waste gate (manifold to wastegate) and NOT for the outlet side of wastegate. Made in the USA
Available in standard long sweeping radius OR extra tight low profile radius. Select from menu.
$65.00Himni Racing Tial 38mm MVS V-band external wastegate block off flange. Used to block off the wastegate inlet flange on an exhaust manifold/header or turbine housing. An ideal part if your are not going use the wastegate mounting. CNC machined in the USA & made of billet mild steel. Attaches to the manifold or turbine housing using a Tial MVS INLET v-band clamp, sold separately.
- Brand: HIMN'I Racing
- Application: TiAL 38mm MVS wastegate block off flange.
- Material Type: Mild Carbon Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Himni Racing Tial 44mm V44 & MVR V-band external wastegate block off flange. Used to block off the wastegate inlet flange on an exhaust manifold/header or turbine housing. An ideal part if your are not going use the wastegate mounting. CNC machined in the USA & made billet mild steel. Attaches to the manifold or turbine housing using a Tial 44mm INLET v-band clamp, sold separately.
- Brand: HIMN'I Racing
- Application: TiAL 44mm V44 & MVR wastegate block off flange.
- Material Type: Mild Carbon Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
TiAL stainless steel replacement V-band INLET mounting flange for the Tial 44mm V44 & MVR external wastegates. Used to mount the 44mm wastegate to turbo exhaust manifolds/headers.
- Brand: TiAL
- Application: Tial 44mm V44 & MVR wastegate inlet side
- Material Type: Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
TiAL stainless steel replacement V-band OUTLET flange for the Tial 44mm V44 & MVR external waste gates. Used to mount the outlet dump tube to the 44mm wastegate.
- Brand: TiAL
- Application: Tial 44mm V44 & MVR wastegate outlet side
- Material Type: Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
Himni Racing 90 degree double flanged elbow for TiAL 44mm MVR & V44 external wastegates. Perfect for repositioning the waste gate in relation to the manifold & surrounding components. Made of 100% 304 stainless steel. Flanged on both sides for Tial 44mm waste gates. Built from heavy duty TiAL stainless flanges and thick-wall stainless pipe. Extremely durable & hi flow. Nice TIG welded construction. Used on the inlet side of waste gate (manifold to wastegate) and NOT for the outlet side of wastegate. Made in the USA
Available in standard long sweeping radius OR extra tight low profile radius. Select from menu.
$65.00TiAL Stainless Steel replacement Inlet (manifold side) V-band clamp for TiAL 44mm V44 & MVR V-band external wastegate. Used to mount the wastegate to an exhaust manifold/header. Includes bolt & lock nut.
- Brand: TiAL
- Application: Tial 44mm V44 & MVR waste gate
- Material Type: Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
TiAL Stainless Steel replacement Outlet V-band clamp for TiAL 44mm V44 & MVR external wastegate. Used to mount the dump tube outlet flange to the waste gate. Includes lock nut & bolt.
- Brand: TiAL
- Application: Tial 44mm V44 & MVR waste gate outlet
- Material Type: Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
Stainless steel, smooth mandrel bend, 1.50" diameter wastegate dump tube. (45 degree elbow) This item allows you to rout the OUTLET of your wastegate to any given area. (back into the exhaust, to open air, etc.) Made in the USA using only USA manufactured tubing. Guaranteed Superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including waste gate outlet/inlet plumbing, upgrading radiator hoses to metal, etc.
Specs:
Made In USA
Bend Degree: 45
Diameter: 1.50" inch O.D.
Gauge: 16
Leg Length: 6 Inch
Bend Type: Smooth mandrel
Stainless steel, smooth mandrel bend, 1.75" diameter wastegate dump tube. (45 degree elbow) This item allows you to rout the OUTLET of your wastegate to any given area. (back into the exhaust, to open air, etc.) Made in the USA using only USA manufactured tubing. Guaranteed Superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including waste gate outlet/inlet plumbing, upgrading radiator hoses to metal, etc.
Specs:
Made In USA
Diameter: 1.75" inch O.D.
Bend Degree: 45
Gauge: 16
Leg Length: 6 Inch
Bend Type: Smooth mandrel
TiAL Stainless Steel Inlet/Outlet Flange for TiAL 46mm wastegate. Used to mount the wastegate to turbo manifold or to mount the oulet dump tube. Does not include gasket.
$29.00TiAL stainless steel V-band INLET mounting flange for the Tial V60 60mm external wastegate. Used to mount the V60 waste gate to turbo exhaust manifold.
Note: No Gaskets are required with vband flanges.
$33.99TiAL stainless steel V-band OUTLET mounting flange for the Tial V60 60mm external wastegate. Used to rout/mount the V60 waste gate dump tube.
Note: No Gaskets are required with vband flanges.
$33.99TiAL Air Fitting Set For Tial 50mm BOV and ALL Tial Wastegates. Includes:: 1 Banjo Fitting, 1 Banjo Bolt & 2 Washers/gaskets.
$19.40Authentic TiAL Stainless Steel Valve Seat / Sealing Ring for the older TiAL 38mm F38 (2 bolt inlet)& TAL 38mm MVS (V38 V-Band) external wastegates. Select your wastegate from the menu. This part goes between the waste gate inlet flange & exhaust manifold to create leek free seal. If your wastegate is missing this item, it will completely destroy the proper function of the waste gate. It is an absolute 'must' part for the gate to function correctly.
$24.95TiAL Stainless Steel external waste gate Valve Seat / Sealing Ring for both of the Tial 44mm v-band wastegate). Goes between the wastegate and inlet flange to create leek free seal.
Select from menu:
For the Older V44 waste gate (has large top hate & no water cooling ports)
For the New MVR waste gate (small top hat with water cooling ports)
Genuine Tial replacement diaphragm for the 38mm 2 bolt flanged waste gate (F38) & V-band 44mm waste gate (V44). Used to replace your old diaphragm that may be worn or damaged. Installs in the external wastegate with little effort & time. A cost effective alternative to replacing the whole gate.
$59.99Genuine Tial replacement diaphragm for the 38mm MVS/MS-S/MVS-A V38 V-band waste gate. Used to replace your old diaphragm that may be worn or damaged. Installs in the external wastegate with little effort & time. A cost effective alternative to replacing the whole gate.
$54.99Genuine Tial replacement diaphragm for the 44mm MVR/MV-R V-band waste gate. Used to replace your old diaphragm that may be worn or damaged. Installs in the external wastegate with little effort & time. A cost effective alternative to replacing the whole gate.
$55.99Stainless steel, smooth mandrel bend, 1.50" diameter wastegate 90 degree elbow dump tube. This item allows you to rout the OUTLET of your wastegate to any given area. (back into the exhaust, to open air, etc.) Made in the USA using only USA manufactured tubing. Guaranteed Superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including waste gate outlet/inlet plumbing, upgrading radiator hoses to metal, etc.
Specs:
Made In USA
Diameter: 1.50" inch O.D.
Bend Degree: 90
Gauge: 16
Leg Length: 6 Inch
Bend Type: Smooth mandrel
Stainless steel, smooth mandrel bend, 1.75" diameter 90 degree elbow. This item allows you to rout the OUTLET of your wastegate to any given area. (back into the exhaust, to open air, etc.) Made in the USA using only USA manufactured tubing. Guaranteed Superior strength & durability compared to other so called "304 SS" tubing on the market today. Perfect for fluids & gases including waste gate outlet/inlet plumbing, upgrading radiator hoses to metal, etc.
Specs:
Made In USA
Diameter: 1.75" inch O.D.
Bend Degree: 90
Gauge: 16
Leg Length: 6 Inch
Bend Type: Smooth mandrel
TiAL Stainless Steel replacement Inlet (manifold side) V-band clamp for TiAL 60mm V60 V-band external wastegate. Used to mount the wastegate to an exhaust manifold/header. Includes bolt & lock nut.
- Brand: TiAL
- Application: Tial 60 V60 waste gate
- Material Type: Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
TiAL Stainless Steel replacement Outlet V-band clamp for TiAL 60mm V60 external wastegate. Used to mount the dump tube outlet flange to the waste gate. Includes lock nut & bolt.
- Brand: TiAL
- Application: Tial 60mm V60 outlet
- Material Type: Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
TiAL stainless steel replacement V-band OUTLET flange for the Tial 60mm V60 external waste gates. Used to mount the outlet dump tube to the 60mm wastegate.
- Brand: TiAL
- Application: Tial 60mm V60 wastegate outlet side
- Material Type: Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
TiAL stainless steel replacement V-band INLET mounting flange for the Tial 60mm V60 external wastegates. Used to mount the v60 wastegate to turbo exhaust manifolds/headers.
- Brand: TiAL
- Application: Tial 60mm V60 wastegate inlet side
- Material Type: Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
I LOVED THE SERVICE YOU GUYS GAVE ME WITH MY NEW WASTE GATE! TRULY HELPFUL AND GENEROUS. LOOK FORWARD TO BUYING MORE.
- Sheryl P. CasulA, Australia...
Read More ->
I called and placed my order over the phone. I had a bunch of questions and the lady was kind and very helpful. She made sure I got all the right......
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.