Racepipe V 2.0, cat delete for EVO X (EVO 10). Features stainless tubing, TIG welded construction. Dual O2 bungs (one extra for wideband tuning) and CNC machined flanges. 100% bolt-up replacement for restrictive stock cat, made in the USA!
$149.00Divorced 3" stainless O2 housing, downpipe and cat delete assembly for 2008 and up Mitsubishi Evolution X (10) High flow replacement for stock restrictive cast elbow, stock downpipe, and stock cat. Bolt up a 3" stainless catback system and you have a full 3" turboback.
$315.003" stainless steel mid-pipe for 2008 and up Mitsubishi Evolution x (10). Mandrel bent and V-Band flanged. Connects directly to back of the cat on EVO X and terminates with a 3" V-Band flange which allows you to add one muffler with either single or dual exits. Use to build your own catback system. Lightweight and durable. 304 grade stainless with TIG welded flanges & made in the USA!.
$232.00High flow compressor 3" inlet pipe set for EVO X turbo. Includes 3" inlet elbow, 3" couplers, and upper pipe to mate to the airbox. All aluminum, TIG welded construction and wrinkle black powdercoated. Designed to be used on stock turbo (alum adapter plate shown) or without the adapter plate. Also fits the Garrett GT3071R, GT3076R, etc.
$220.00High flow compressor outlet pipe for Evo X turbo. 2 bolt flanged, progressive tapered and larger diameter. Lightweight aluminum. Contoured machined outlet flange for smooth flow and o-ring flange face eliminates leaks and the 2 bolt gasket for proper seal. Immediately tapers from stock 1.75" diameter to 2.5" diameter and overall discharge area is increased by 100%. Don't upgrade your upper intercooler piping without eliminating this bottleneck out of the turbo! All aluminum, TIG welded construction and wrinkle black powdercoated finish.
$93.99Internal wastegate housing w/ Swingvalve. Fits standard T3 5 Bolt discharge (ford style) turbine housings & converts it to a unique 4 bolt downpipe discharge pattern. Note: The 4 Bolt pattern is not the same as the our 2.5" & 3" 4 bolt downpipe flanges.
$78.50Complete internal wastegate assembly as shown in the picture above. It includes the internal wastegate housing with pre-assembled swing valve, adjustable , and a machined mounting bracket for the actuator.
Made in the USA & Fits all Turbochargers With T3 5-bolt (ford style) Turbine Housing. Your pick of 7 psi, 14 psi or 22 psi actuator.
Fits turbos such as:
T3, T3/T4, GT28RS, GT2871R, GT30R, GT3071R, GT3076R, GT25/40R, GT35R, etc.
This internal wastegate bolts to the turbo using the 5 mounting holes. The down pipe is attached to the wastegate assembly with the 3 mounting holes on the other side. Boost pressure is easily adjustable via the adjustable arm on the actuator. The included actuator mounting bracket allows for fitment to most turbos.
Comes Complete with:
---T3 5-bolt internal wastegate housing & Swing Valve
---Boost Adjustable actuator
---Mounting Bracket
3-bolt downpipe flanges to fit this internal wastegate are also available on our site.
$221.00Internal wastegate Swingvalve for larger 5 bolt Mercedes style bolt pattern. Ultimate internal wastegate swingvalve with 3" V-Band on downpipe side. Bolts up to T3 5-bolt turbine housing with larger (Mercedes style) bolt pattern. Super high flowing design for high HP efficiency applications utilizing an internal wastegate. Works with our 3.00" V-band flanges & clamps.
$147.00Made In The USA. A very nice high quality US cast aluminum intercooler end tank. Used as lower passenger side or upper driver side. (US spec cars) Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects.
12" tall x 3" thick w/ 3" inlet/ outlet. (note picture shows 3.5" thick, tank will infact be 3" thick)
It can be cut 1" shorter to make it 11" tall or even cut down to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 900HP+ I/C cores.
$74.90Made In The USA. A very nice high quality US cast aluminum intercooler end tank. Used as upper passenger side or lower driver side. (US spec cars) Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects.
12" tall x 3" thick w/ 3" inlet/ outlet. (note picture shows 3.5" thick, tank will infact be 3" thick)
It can be cut 1" shorter to make it 11" tall or even cut down to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 900HP+ I/C cores.
$74.90Made In The USA. A very nice high quality US cast aluminum intercooler end tank. Used as upper passenger side or lower driver side. (US spec cars) Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects.
12" tall x 3.5" thick w/ 3" inlet/ outlet.
It can be cut 1" shorter to make it 11" tall x 3" thick or even cut down to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 900HP+ I/C cores.
$74.90Made In The USA. A very nice high quality US cast aluminum intercooler end tank. Used as lower passenger side or upper driver side. (US spec cars) Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects.
12" tall x 3.5" thick w/ 3" inlet/ outlet.
It can be cut 1" shorter to make it 11" tall x 3" thick or even cut down to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 900HP+ I/C cores.
$74.90Made In The USA. High quality USA made cast aluminum intercooler end tank blank. Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects. Inlet & outlet aluminum pipes & tubes are found on our site under:
Pipes/Bends/Elbows/Tubing > Bushed Aluminum Pipes.
12" tall x 3" thick. Price is for one end tank. Most I/C applications will require a quantity of 2.
Can be cut 1" shorter to make it 11" tall or to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 950HP+ I/C cores.
$64.90Made In The USA. High quality USA made cast aluminum intercooler end tank blank. Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects. Inlet & outlet aluminum pipes & tubes are found on our site under:
Pipes/Bends/Elbows/Tubing > Bushed Aluminum Pipes.
12" tall x 3.50" thick. Price is for one end tank. Most I/C applications will require a quantity of 2.
Can be cut 1" shorter to make it 11" tall or to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 950HP+ I/C cores.
$64.90Made In The USA. High quality USA made cast aluminum intercooler end tank blank. Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects. Inlet & outlet aluminum pipes & tubes are found on our site under:
Pipes/Bends/Elbows/Tubing > Bushed Aluminum Pipes.
12" tall x 4.50" thick. Price is for one end tank. Most I/C applications will require a quantity of 2.
Can be cut 1" shorter to make it 11" tall or to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 950HP+ I/C cores.
$64.90Made In The USA. High quality USA made cast aluminum intercooler end tank blank. Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects. Inlet & outlet aluminum pipes & tubes are found on our site under:
Pipes/Bends/Elbows/Tubing > Bushed Aluminum Pipes.
12" tall x 4.50" thick. Price is for one end tank. Most I/C applications will require a quantity of 2.
Can be cut 1" shorter to make it 11" tall or to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 950HP+ I/C cores.
$64.90Made In The USA. High quality USA made cast aluminum intercooler end tank blank. Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects. Inlet & outlet aluminum pipes & tubes are found on our site under:
Pipes/Bends/Elbows/Tubing > Bushed Aluminum Pipes.
12" tall x 4.50" thick. Price is for one end tank. Most I/C applications will require a quantity of 2.
Can be cut 1" shorter to make it 11" tall or to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 950HP+ I/C cores.
$64.90Made In The USA. High quality USA made cast aluminum intercooler end tank blank. Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects. Inlet & outlet aluminum pipes & tubes are found on our site under:
Pipes/Bends/Elbows/Tubing > Bushed Aluminum Pipes.
12" tall x 4.50" thick. Price is for one end tank. Most I/C applications will require a quantity of 2.
Can be cut 1" shorter to make it 11" tall or to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 950HP+ I/C cores.
$64.90Garrett 40mm GVW-40 External Wastegate ...
$317.00Made In The USA. High quality USA made cast aluminum intercooler end tank blank. Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects. Inlet & outlet aluminum pipes & tubes are found on our site under:
Pipes/Bends/Elbows/Tubing > Bushed Aluminum Pipes.
12" tall x 4.50" thick. Price is for one end tank. Most I/C applications will require a quantity of 2.
Can be cut 1" shorter to make it 11" tall or to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 950HP+ I/C cores.
$64.90Made In The USA. High quality USA made cast aluminum intercooler end tank blank. Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects. Inlet & outlet aluminum pipes & tubes are found on our site under:
Pipes/Bends/Elbows/Tubing > Bushed Aluminum Pipes.
12" tall x 4.50" thick. Price is for one end tank. Most I/C applications will require a quantity of 2.
Can be cut 1" shorter to make it 11" tall or to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 950HP+ I/C cores.
$64.90Master engine hardware kit. Replaces mo...
$84.00Made In The USA. High quality USA made cast aluminum intercooler end tank blank. Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects. Inlet & outlet aluminum pipes & tubes are found on our site under:
Pipes/Bends/Elbows/Tubing > Bushed Aluminum Pipes.
12" tall x 4.50" thick. Price is for one end tank. Most I/C applications will require a quantity of 2.
Can be cut 1" shorter to make it 11" tall or to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 950HP+ I/C cores.
$64.90Himni Racing Polyurethane FD RX-7 Motor...
$99.90Made In The USA. High quality USA made cast aluminum intercooler end tank blank. Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects. Inlet & outlet aluminum pipes & tubes are found on our site under:
Pipes/Bends/Elbows/Tubing > Bushed Aluminum Pipes.
12" tall x 4.50" thick. Price is for one end tank. Most I/C applications will require a quantity of 2.
Can be cut 1" shorter to make it 11" tall or to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 950HP+ I/C cores.
$64.90Master engine hardware kit. Replaces mo...
$78.00Made In The USA. High quality USA made cast aluminum intercooler end tank blank. Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects. Inlet & outlet aluminum pipes & tubes are found on our site under:
Pipes/Bends/Elbows/Tubing > Bushed Aluminum Pipes.
12" tall x 4.50" thick. Price is for one end tank. Most I/C applications will require a quantity of 2.
Can be cut 1" shorter to make it 11" tall or to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 950HP+ I/C cores.
$64.90Himni Racing Polyurethane FC RX-7 Motor...
$98.00Made In The USA. High quality USA made cast aluminum intercooler end tank blank. Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects. Inlet & outlet aluminum pipes & tubes are found on our site under:
Pipes/Bends/Elbows/Tubing > Bushed Aluminum Pipes.
12" tall x 4.50" thick. Price is for one end tank. Most I/C applications will require a quantity of 2.
Can be cut 1" shorter to make it 11" tall or to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 950HP+ I/C cores.
$64.90Made in USA. The Himni Racing FC RX7 St...
$215.00Made In The USA. High quality USA made cast aluminum intercooler end tank blank. Welds beautifully, Great for use with our Garrett GT intercooler cores & custom I/C projects. Inlet & outlet aluminum pipes & tubes are found on our site under:
Pipes/Bends/Elbows/Tubing > Bushed Aluminum Pipes.
12" tall x 4.50" thick. Price is for one end tank. Most I/C applications will require a quantity of 2.
Can be cut 1" shorter to make it 11" tall or to other sizes depending on your needs. A very nice piece with contoured casting. Used for up to 950HP+ I/C cores.
$64.90For use with All small to mid frame Gar...
$78.00Himni Racing Polyurethane FD RX-7 Motor...
Himni Racing Polyurethane FC RX-7 Motor...
I LOVED THE SERVICE YOU GUYS GAVE ME WITH MY NEW WASTE GATE! TRULY HELPFUL AND GENEROUS. LOOK FORWARD TO BUYING MORE.
- Sheryl P. CasulA, Australia...
Read More ->
very fast shipping for international!!!! thank you & i will be back for more soon.
-Michael E. Rattelsdorf, Germany...
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.