Turbo V-Band Flanges & Adapters : Himni Racing, Turbocharger, Turbo, Garrett, Turbo Kit, GReddy, Mazda RX-7, HKS, Apexi, TiAL, TurboXS, TurboSmart, Flange, Turbonetics, Exhaust, Intercooler, ACT, Intake

vband flange clamp male female 3 4 5 inch.jpg

2" V-band Exhaust Flange & Clamp Set MALE/FEMALE INTERLOCK SS

Made In USA. HR 2.00" Male/Female INTERLOCK V-Band Flange & Clamp kit. Includes (x2) matching flanges (one male w/ lip, one female with groove) & (x1) clamp. Used together as a pair for self alinement, increased sealing & smooth transition flange to flange connection. Outstanding quality, precision fit, durable, reusable & reliable. This item is normally in stock & ships within 1-72 hours.

- Brand: HIMN'I Racing
- Design: 2" INTERLOCK V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 2 Inch I.D. For 2 Inch" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2" Inch I.D., 3 " OD (about 50.8mm) Lipped & grooved.
- Overall Thickness/Height Of Each Flange: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$46.90

Add to Cart

2" V-Band Turbo Flange Downpipe Exhaust Stainless

Made In USA. HR 2" STANDARD V-Band Flange. Includes (x1) Flange. Flat face, Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.

- Brand: HIMN'I Racing
- Design: 2" STANDARD V-Band Flange.
- #1 Tube/Pipe Side: 2" Inch I.D. w/ recessed alignment groove. For 2" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2" Inch I.D. / 3" O.D. (about 50.8mm) Flat face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$18.90

Add to Cart

2.25" V-band Flange - Special Ni-Resist INLET Step LIP Stainless

Made In USA. HR GT INLET Step LIP V-Band flange for Garrett turbos using V-band inlet & outlet. Special V-Flange with protruding LIP is for use with Garrett (& other band) turbos that have a recessed groove in the inner diameter of the turbine/ exhaust housing INLET (exhaust manifold side) (interlocking layout) Most commonly found on the Garrett V-band Ni-Resist GT25R-GT35R turbine housings. ) Made of stainless steel, outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.

- Brand: HIMN'I Racing
- Design: Special LIP INLET V-Band flange.
- #1 Tube/Pipe Side: 2.25" Inch I.D. w/ recessed alignment groove. For use w/ 2.25" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 3.00" Inch (74.5mm) O.D. inner protruding alinemet LIP face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

Fits all Garrett turbos/turbine housings using a recessed groove INLET v-band, including the v-band Ni-Resist housings. Including:
GT25, GT25R, GT2554R, GT28, GT28R, GT2860R, GT2660RS, GT2871R, GTX2860R, GTX2863R, GTX2867R, GT2876R, GTX2967R, GTX2971R, GTX2976R, GT3071, GT3071R-WG, GT3076R-WG, GT3071R, GTX3071R, GT30, GT30R, GTX3067R, GT3076R, GTX3076R, GT3040R, GT3082R, GT35, GT35R, GTX35R, GTX3576R, GT3582R, GTX3582R, etc. (Does not fit Standard flat face or Tial SS housings)

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

This item is normally in stock at all times & ships within 1-72 hours.

$31.50

Add to Cart

2.5" V-Band Exhaust Downpipe Flange -DUAL STEP Stainless Steel

Made In USA. HR 2.50" Dual Step V Band flange. As a special feature, this flange is made so that it can be used with either a 2.50" or 3.00" downpipe/tube. (double step) With the machined alignment lips, a 2.5" pipe can slipped on the inside diameter of the flange or a 3" pipe can be used on the outside diameter of the flange. Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.

- Brand: HIMN'I Racing
- Design: 2.50" Dual Step V Band exhaust mounting flange.
- #1 Tube/Pipe Side: 2.50" Inch I.D./ 3.00" Inch O.D. w/ recessed alignment lip/groove. For 2.50" or 3.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2.50" Inch I.D. / 3 1/16" O.D. flat face.
- Overall Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$24.00

Add to Cart

2.5" V-band Flange & Clamp Set - 1 & 1 DUAL STEP Stainless

Made In USA. HR 2.50" Dual Step V Band flange & Clamp Kit. Includes (x1) Flange & (x1) Clamp. As a special feature, this flange is made so that it can be used with either a 2.50" or 3.00" downpipe/tube. (double step) With the machined alignment lips, a 2.5" pipe can slipped on the inside diameter of the flange or a 3" pipe can be used on the outside diameter of the flange. Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.

- Brand: HIMN'I Racing
- Design: 2.50" Double Step V Band flange & Clamp Kit
- #1 Tube/Pipe Side: 2.50" Inch I.D./ 3.00" Inch O.D. w/ recessed alignment lip/groove. For 2.50" or 3.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2.50" Inch I.D. / 3 1/16" O.D. flat face.
- Overall Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$41.98

Add to Cart

2.5" V-band Flange & Clamp Set - 1 & 1 STANDARD Stainless

Made In USA. HR 2.50" STANDARD V Band Flange & Clamp Kit. Includes (x1) Flange & (x1) Clamp. For use with 2.50" OD pipes. Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.

- Brand: HIMN'I Racing
- Design: 2.50" STANDARD V-Band Flange & Clamp Kit
- #1 Tube/Pipe Side: 2.50" Inch I.D./ 3.00" Inch O.D. w/ recessed alignment lip/groove. For 2.50" exhaust pipe/tube.
- #2 Face/Seal Side: 2.50" Inch I.D. / 3 1/16" O.D. flat face.
- Overall Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$36.98

Add to Cart

2.5" V-Band Turbo Flange Downpipe Exhaust -STANDARD Stainless

Made In USA. HR 2.50" STANDARD V-Band Flange. Includes (x1) Flange. Flat face, Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.

- Brand: HIMN'I Racing
- Design: 2.50" STANDARD V-Band Flange.
- #1 Tube/Pipe Side: 2.5" Inch I.D. w/ recessed alignment groove. For 2.5" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2.50" Inch I.D. / 3 1/16" O.D. flat face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

For use with many T3, T4 & GT series turbos with a 2.50" v-band downpipe discharge, including:
T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T04Z, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GTX3576R, GT3082R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT40, GT4082, GT4088, GT40R, GT40RS, GT4088R, GT4094, GT4094R

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$18.90

Add to Cart

2.5" V-band Exhaust Flange & Clamp Set MALE/FEMALE INTERLOCK SS

Made In USA. HR 2.50" Male/Female INTERLOCK V-Band Flange & Clamp kit. Includes (x2) matching flanges (one male w/ lip, one female with groove) & (x1) clamp. Used together as a pair for self alinement, increased sealing & smooth transition flange to flange connection. Outstanding quality, precision fit, durable, reusable & reliable. This item is normally in stock & ships within 1-72 hours.

- Brand: HIMN'I Racing
- Design: 2.5" INTERLOCK V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 2.50" Inch I.D. For 2.50" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2.50" Inch I.D., 3 1/16" OD (about 76mm) Lipped & grooved.
- Overall Thickness/Height Of Each Flange: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$46.90

Add to Cart

3" V-band Exhaust Flange & Clamp Set MALE/FEMALE INTERLOCK SS

Made In USA. HR 3.00" Male/Female INTERLOCK V-Band Flange & Clamp kit. Includes (x2) matching flanges (one male w/ lip, one female with groove) & (x1) clamp. Used together as a pair for self alinement, increased sealing & smooth transition flange to flange connection. Outstanding quality, precision fit, durable, reusable & reliable. This item is normally in stock & ships within 1-72 hours.

- Brand: HIMN'I Racing
- Design: 3.00" INTERLOCK V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 3.00" Inch I.D. For 3.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 3.00" Inch I.D. / 3 3/4" O.D. (3.75" / 95mm) Lipped & grooved.
- Overall Thickness/Height Of Each Flange: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$46.90

Add to Cart

3" V-band Turbo Exaust Flange & Clamp Set - 2 & 1 Stainless

Made In USA. HR 3.00" STANDARD V-Band Flange & Clamp kit. Includes (x2) flanges & (x1) clamp. The most commonly used 3.00" V-Flange. Flat face. Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID. This item is normally in stock & ships within 1-72 hours.

- Brand: HIMN'I Racing
- Design: 3.00" STANDARD V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 3.00" Inch I.D. w/ recessed alignment groove. For 3.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 3.00" Inch I.D. / 3 5/8" O.D. (94.5mm) flat face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

For use with many T3, T4 & GT series turbos with a 3" v-band downpipe discharge, including:
T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T04Z, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GTX3576R, GT3082R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT40, GT4082, GT4088, GT40R, GT40RS, GT4088R, GT4094, GT4094R

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$39.99

Add to Cart

3" V-Band Turbo Exhaust Flange & Clamp Set - 1 & 1- Stainless

Made In USA. HR 3.00" V-Band Flange & Clamp kit. Includes (x1) flange & (x1) clamp. The most commonly used 3.00" V-Flange. Flat face, Your choice of mild carbon or stainless steel & face side outer diameter. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.

Flanges are available in 2 Face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)

- Brand: HIMN'I Racing
- Design: 3.00" STANDARD V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 3.00" Inch I.D. w/ recessed alignment groove. For 3.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: See above, 3" inner diameter.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

For use with many T3, T4 & GT series turbos with a 3" v-band downpipe discharge, including:
T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T04Z, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GTX3576R, GT3082R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT40, GT4082, GT4088, GT40R, GT40RS, GT4088R, GT4094, GT4094R

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$34.98

Add to Cart

3" V-Band Turbo Flange Downpipe Exhaust - Stainless Steel

Made In USA. HR 3.00" V-Band Flange. Includes (x1) Flange. The most commonly used 3.00" V-Flange. Flat face, your choice of mild carbon or stainless steel & choice of Outer Diameter (OD). Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.

Available in 3 Face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)
#3: 3.50" (3 1/2" / 90mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe. (Extra small) Only available in stainless steel.

- Brand: HIMN'I Racing
- Design: 3.00" STANDARD V-Band Flange.
- #1 Tube/Pipe Side: 3.00" Inch I.D. w/ recessed alignment groove. For 3.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: See Above.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

For use with many T3, T4 & GT series turbos with a 3" v-band downpipe discharge, including:
T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T04Z, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GTX3576R, GT3082R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT40, GT4082, GT4088, GT40R, GT40RS, GT4088R, GT4094, GT4094R

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$18.90

Add to Cart

3" V-band Flange - Special GT OUTLET Step LIP Stainless

Made In USA. HR 3.00" GT LIP V-Band flange. Special V-Flange with protruding LIP is for use with Garrett (& other band) turbos that have a recessed groove in the inner diameter of the turbine/ exhaust housing downpipe discharge. (interlocking layout) Also for all Garrett GT25R-GT35R turbos using the Garrett Ni-Resist vBand turbine housing. (outlet side) Made of stainless steel, outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID. Available in two LIP outer diameter sizes, 78mm & 81mm.

- Brand: HIMN'I Racing
- Design: 3.00" Special LIP V-Band flange.
- LIP Outer Diameter Size: 78mm or 81mm (select from menu)
- #1 Tube/Pipe Side: 3.00" Inch I.D. w/ recessed alignment groove. For use w/ 3.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 3.00" Inch (74.5mm) I.D. / 3.5" Inch (90.1mm) O.D. inner protruding LIP face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

Fits all Garrett turbos/turbine housings using a recessed groove downpipe outlet discharge, including the v-band Ni-Resist housings. Including:
GT25, GT25R, GT2554R, GT28, GT28R, GT2860R, GT2660RS, GT2871R, GTX2860R, GTX2863R, GTX2867R, GT2876R, GTX2967R, GTX2971R, GTX2976R, GT3071, GT3071R-WG, GT3076R-WG, GT3071R, GTX3071R, GT30, GT30R, GTX3067R, GT3076R, GTX3076R, GT3040R, GT3082R, GT35, GT35R, GTX35R, GTX3576R, GT3582R, GTX3582R, etc. (Does not fit Standard flat face or Tial SS housings)

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$25.50

Add to Cart

3" V-Band Turbo Flange & Clamp Set - Special GT LIP Stainless

Made In USA. HR 3.00" LIP V-Band flange & clamp kit. Special V-Flange with protruding LIP is for use with Garrett (& other band) turbos that have a recessed groove in the inner diameter of the turbine/ exhaust housing downpipe discharge. (interlocking layout) Also for all Garrett GT25R-GT35R turbos using the Garrett Ni-Resist vBand turbine housing. (outlet side) Made of stainless steel, outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID. Available in two LIP outer diameter sizes, 78mm & 81mm

- Brand: HIMN'I Racing
- Design: 3.00" Special LIP V-Band flange.
- LIP Outer Diameter Size: 78mm or 81mm (select from menu)
- #1 Tube/Pipe Side: 3.00" Inch I.D. w/ recessed alignment groove. For use w/ 3.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 3.00" Inch (74.5mm) I.D. / 3.5" Inch (90.1mm) O.D. inner protruding LIP face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

Fits all Garrett turbos/turbine housings using a recessed groove downpipe outlet discharge, including the v-band Ni-Resist housings. Including:
GT25, GT25R, GT2554R, GT28, GT28R, GT2860R, GT2660RS, GT2871R, GTX2860R, GTX2863R, GTX2867R, GT2876R, GTX2967R, GTX2971R, GTX2976R, GT3071, GT3071R-WG, GT3076R-WG, GT3071R, GTX3071R, GT30, GT30R, GTX3067R, GT3076R, GTX3076R, GT3040R, GT3082R, GT35, GT35R, GTX35R, GTX3576R, GT3582R, GTX3582R, etc. (Does not fit Standard flat face or Tial SS housings)

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2::
Not for use with Borg Warner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$54.50

Add to Cart

vband 3inch o2 downpipe outlet flange.jpg

3" V-Band Turbo Flange Downpipe w/ o2 Port Stainless Steel

Made In USA. HR 3.00" o2 PORT V-Band Flange. Flat face, for 3" down pipes, has a integrated O2 bung port. Connects to the back of a turbo. The o2 port is threaded to a common 18mm & fits most o2 sensors, including Bosch units. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner groove on the pipe side insures a smooth transition from flange ID to tube ID.

Available in 2 Face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)

- Brand: HIMN'I Racing
- Design: 3.00" o2 Port V-Band Flange.
- #1 Tube/Pipe Side: 3.00" Inch I.D. w/ recessed alignment groove. For 3.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 3.00" Inch I.D. with 3 3/4" OR 3 5/8" O.D. (select from menu)
- Overall Thickness/Height: 1 1/2" inch (1.50")
- Material Type: Mild Carbon Steel or Stainless steel. (Select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

For use with many T3, T4 & GT series turbos with a 3" v-band downpipe discharge, including:
T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T04Z, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GTX3576R, GT3082R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT40, GT4082, GT4088, GT40R, GT40RS, GT4088R, GT4094, GT4094R

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$19.95

Add to Cart

3.5" V-band Exhaust Flange & Clamp Set MALE/FEMALE INTERLOCK SS

Made In USA. HR 3.30" Male/Female INTERLOCK V-Band Flange & Clamp kit. Includes (x2) matching flanges (one male w/ lip, one female with groove) & (x1) clamp. Used together as a pair for self alinement, increased sealing & smooth transition flange to flange connection. Outstanding quality, precision fit, durable, reusable & reliable. This item is normally in stock & ships within 1-72 hours.

- Brand: HIMN'I Racing
- Design: 3.50" INTERLOCK V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 3.50" Inch I.D. For 3.50" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 3.50" Inch I.D. / 4.25" O.D. (108mm) Lipped & grooved.
- Overall Thickness/Height Of Each Flange: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$51.90

Add to Cart

3.50" V-Band Turbo Flange & Clamp Kit 1 & 1 - Stainless Steel

Made In USA. HR 3.50" V-Band Flange & Clamp Kit. Includes (x1) flange & (x1) matching clamp. Flat face, for use with 3.50 inch down pipes. Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.

- Brand: HIMN'I Racing
- Design: 3.50" V-Band Flange.
- #1 Tube/Pipe Side: 3.50" Inch I.D. w/ recessed alignment groove. For 3.50" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 3.50" Inch I.D. / 4.25" O.D. (108mm) flat face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$39.99

Add to Cart

3.50" V-Band Turbo Flange Downpipe - Stainless Steel

Made In USA. HR 3.50" V-Band Flange. Flat face, for use w/ 3.50 inch down pipes. Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID. Perfect for use with our 3.50" v-band clamp.

- Brand: HIMN'I Racing
- Design: 3.50" V-Band Flange.
- #1 Tube/Pipe Side: 3.50" Inch I.D. w/ recessed alignment groove. For 3.50" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 3.50" Inch I.D. / 4.25" O.D. (108mm) flat face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$21.99

Add to Cart

4" V-band Exhaust Flange & Clamp Set MALE/FEMALE INTERLOCK SS

Made In USA. HR 4.00" Male/Female INTERLOCK V-Band Flange & Clamp kit. Includes (x2) matching flanges (one male w/ lip, one female with groove) & (x1) clamp. Used together as a pair for self alinement, increased sealing & smooth transition flange to flange connection. Outstanding quality, precision fit, durable, reusable & reliable. This item is normally in stock & ships within 1-72 hours.

- Brand: HIMN'I Racing
- Design: 4.00" INTERLOCK V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 4.00" Inch I.D. For 4.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 4.00" Inch I.D. / 4 5/8" O.D. (117.3mm) Lipped & grooved.
- Overall Thickness/Height Of Each Flange: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$51.90

Add to Cart

4" V-Band Flange For Downpipes - Stainless Steel 4.62" OD

Made In USA. HR 4.00" V-Band Flange. Flat face, for use w/ 4.00 inch down pipes. Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID. Perfect for use with our 4.00" SS v-band clamp.

- Brand: HIMN'I Racing
- Design: 4.00" V-Band Flange.
- #1 Tube/Pipe Side: 4.00" Inch I.D. w/ recessed alignment groove. For 4.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 4.00" Inch I.D. / 4.62" O.D. (120.65mm) flat face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Fits many turbos with a 4.00" v-band turbine/exhaust discharge outlet including: Garrett GT42, GT42R, GT42RS, GT4294, GT4202, GT4294R, GT4202R, GTX42R, GT4294R, GTX4202R, GT45, GT45R, GT4508R, GTX45R, GTX4508R

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$25.95

Add to Cart

4" V-band Turbo Flange & Clamp Set - 2 & 1 4.62" Stainless Steel

Made In USA. HR 4.00" V-Band Flange & Clamp Kit. Includes (x2) flange & (x1) matching clamp. Flat face, for use w/ 4.00 inch down pipes. Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.

- Brand: HIMN'I Racing
- Design: 4.00" V-Band Flange & Clamp kit.
- #1 Tube/Pipe Side: 4.00" Inch I.D. w/ recessed alignment groove. For 4.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 4.00" Inch I.D. / 4.62" O.D. (120.65mm) flat face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Fits many turbos with a 4.00" v-band turbine/exhaust discharge outlet including: Garrett GT42, GT42R, GT42RS, GT4294, GT4202, GT4294R, GT4202R, GTX42R, GT4294R, GTX4202R, GT45, GT45R, GT4508R, GTX45R, GTX4508R

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$61.50

Add to Cart

4" V-Band Turbo Flange & Clamp Set- 1 & 1 4.62" Stainless Steel

Made In USA. HR 4.00" V-Band Flange & Clamp Kit. Includes (x1) flange & (x1) matching clamp. Flat face, for use w/ 4.00 inch down pipes. Your choice of mild carbon or stainless steel. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner lip/groove on the pipe side insures a smooth transition from flange ID to tube ID.

- Brand: HIMN'I Racing
- Design: 4.00" V-Band Flange & Clamp kit.
- #1 Tube/Pipe Side: 4.00" Inch I.D. w/ recessed alignment groove. For 4.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 4.00" Inch I.D. / 4.62" O.D. (120.65mm) flat face.
- Overall Thickness/Height: 1/2" inch (0.500")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Fits many turbos with a 4.00" v-band turbine/exhaust discharge outlet including: Garrett GT42, GT42R, GT42RS, GT4294, GT4202, GT4294R, GT4202R, GTX42R, GT4294R, GTX4202R, GT45, GT45R, GT4508R, GTX45R, GTX4508R

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$45.90

Add to Cart

5 .00" V-Band Turbo Flange Downpipe Exhaust - GT47R/GT55R SS

Made In USA. HR 5.00" V-Band Flange. Flat face with slight I.D. alignment ridge. For use w/ 5.00 inch down pipes on Garrett GT47R & GT55R T6 large frame turbos. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner groove on the pipe side insures a smooth transition from flange ID to tube ID.

- Brand: HIMN'I Racing
- Design: 5.00" V-Band Flange.
- #1 Tube/Pipe Side: 5.00" Inch I.D. w/ recessed alignment groove. For 5.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 4.5" Inch (115.9mm) I.D./ 5 1/8" O.D. (130.9mm) flat face w/ slight inner alignment ridge.
- Overall Thickness/Height: 7/8" inch
- Material Type: Mild Carbon Steel or 304 Stainless steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Fits many turbos with a T6 turbine/exhaust housing with 5.00" v-band discharge outlet including:
Garrett GT47, GT47R, GT4708, GT4708R, GT4718, GT4718R, GTX4718R, GT55, GT55R, GT5518, GT5518R, GTX55R, GTX5518R, GT5533, GT5533R, GTX5533R, GT5541R, etc.
Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "Borg Warner" in the name.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$33.60

Add to Cart

5" V-band Exhaust Flange & Clamp Set MALE/FEMALE INTERLOCK SS

Made In USA. HR 5.00" Male/Female INTERLOCK V-Band Flange & Clamp kit. Includes (x2) matching flanges (one male w/ lip, one female with groove) & (x1) clamp. Used together as a pair for self alinement, increased sealing & smooth transition flange to flange connection. Outstanding quality, precision fit, durable, reusable & reliable. This item is normally in stock & ships within 1-72 hours.

- Brand: HIMN'I Racing
- Design: 5.00" INTERLOCK V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 5.00" Inch I.D. For 5.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 5.00" Inch I.D. Lipped & grooved.
- Overall Thickness/Height Of Each Flange: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$55.90

Add to Cart

vband downpipe flange clamp kit 5 inch.jpg

5" V-band Turbo Flange & Clamp Set - 1 & 1 - GT47R, GT55R

Made In USA. HR 5.00" V-Band Flange & Clamp kit. Includes (x1) flange & (x1) matching clamp. Flat face with slight I.D. alignment ridge. For use w/ 5.00 inch down pipes on Garrett large frame turbos. Outstanding quality, precision fit, durable, reliable, prevents warping. Covenant self aligning inner groove on the pipe side insures a smooth transition from flange ID to tube ID.

- Brand: HIMN'I Racing
- Design: 5.00" V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 5.00" Inch I.D. w/ recessed alignment groove. For 5.00" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 4.5" Inch (115.9mm) I.D./ 5 1/8" O.D. (130.9mm) flat face w/ slight inner alignment ridge.
- Overall Thickness/Height: 7/8" inch
- Flange Material Type: Mild Carbon Steel Or 304 Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Fits many turbos with a T6 turbine/exhaust housing with 5.00" v-band discharge outlet including:
Garrett GT47, GT47R, GT4708, GT4708R, GT4718, GT4718R, GTX4718R, GT55, GT55R, GT5518, GT5518R, GTX55R, GTX5518R, GT5533, GT5533R, GTX5533R, GT5541R, etc.
Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "Borg Warner" in the name.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$56.90

Add to Cart

V-Band Downpipe Adapter Flange: 2.5" T3 3 Bolt To 3" V-Band

Made In The USA

HR Turbo To Downpipe Converter/Downpipe discharge adapter. Converts a T3 turbine housing from a 2.50" 3_Bolt to a 3" V-Band, or vise-a-verse. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined & rainbow TIG welded. Note: This adapter fits also the T3 internal wastegate swing valves that we offer, along with other applications.

V-Band side is available in two face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)

- Brand: HIMN'I Racing
- Adapter Side #1: T3 3 Bolt w/ 2.50" opening.
- Adapter Side #2: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side.
- Bolt Spacing: About 74mm from the center of one hole to the center of the other.
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1.50"
- Material Type: Mild Carbon & Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

Fits Many Turbos with 2.5" 3 Bolt/5 Bolt hole turbine housings with internal wastegates, Including: T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$78.90

Add to Cart

t3 25inch 4bolt to vband downpipe adapter flange.jpg

V-Band Downpipe Adapter Flange- 2.5" T3 GT 4 Bolt To 3" V-Band

Made In The USA

HR Turbo To Downpipe Converter/Downpipe discharge adapter. Converts a T3 turbine housing from a 2.50" GT 4 Bolt to a 3" V-Band, or vise-a-verse. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. This adapter fits also the T3 internal wastegate swing valves that we offer, along with other applications.

V-Band side is available in two Face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)

- Brand: HIMN'I Racing
- Adapter Side #1: GT 2.50 4 Bolt w/ 2.50" opening.
- Adapter Side #2: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side.
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1.25"
- Material Type: Mild Carbon Steel or Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

Always confirm your bolt spacing to unsure this is the correct item for your application. Fits Many Turbos with 2.5" GT 4 Bolt turbine housing downpipe discharge, Including: T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$57.90

Add to Cart

t3 3inch 4bolt to vband downpipe adapter flange.jpg

V-Band Downpipe Adapter Flange: 3" T3 GT 4 Bolt To 3" V-Band

Made In The USA

HR Turbo To Downpipe Converter/Downpipe discharge adapter. Converts a T3 turbine housing from a 3.00" GT 4 Bolt to a 3" V-Band, or vise-a-verse. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined 1 piece (mild carbon steel) or Rainbow TIG welded (stainless steel) design. This adapter fits also the T3 internal wastegate swing valves that we offer, along with other applications.

V-band side is available in two Face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)

- Brand: HIMN'I Racing
- Adapter Side #1: GT 3.00 4 Bolt Bolt w/ 3.00" opening.
- Adapter Side #2: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side.
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1.25"
- Material Type: Mild Carbon Steel or Stainless steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

Always confirm your bolt spacing to unsure this is the correct item for your application. Fits Many Turbos with 3.00" GT 4 Bolt turbine housing downpipe discharge, Including: T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$57.90

Add to Cart

t3 5bolt to vband downpipe outlet adapter.jpg

V-Band Adapter Flange T3 5 Bolt To 3" V-Band (Ford Style)

Made In USA

HR Turbo To Downpipe Converter discharge/exist adapter. Converts standard T3 5_bolt (aka Ford style) exhaust/turbine housing downpipe discharge to a 3.00" V-band exit. The outer 5 holes are used to bolt the flange to the back of the exhaust housing & a 3.00" V-band flanged downpipe will bolt/clamp directly to it. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined and rainbow TIG welded.

V-band side is available in two Face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)

- Brand: HIMN'I Racing
- Design: T3 5 Bolt To V-band Adapter 3.00"
- Adapter Side #1: T3 5-Bolt w/ 2.50" I.D. (transitions to 3.00")
- Adapter Side #2: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side.
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1.50"
- Material Type: Mild Carbon & stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

Always confirm your bolt spacing to unsure this is the correct item for your application. Fits many turbos with T3 5_bolt turbine housings, including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$87.90

Add to Cart

t25 t28 to vband downpipe outlet adapter flange.jpg

V-Band Adapter Flange T25/T28 GT25R GT28R - Internal Wastgate

Made In USA

HR Turbo To Downpipe Converter discharge/exist adapter. Converts standard T25/ T28/ GT25/ GT28 5_Bolt exhaust/turbine housing downpipe discharge to a 2.50" or 3.00" V-band exit. (your choice, select from menu) The outer 5 holes are used to bolt the adapter flange to the back of a T25 internal wastegate exhaust/turbine housing, converting to a V-band for use with 2.50" or 3.00" downpipe. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined and rainbow TIG welded.

- Brand: HIMN'I Racing
- Design: T25/ T28/ GT25/ GT28 To V-band Adapter 3.00"
- Adapter Side #1: T25 outlet Oval
- Adapter Side #2, Option #1: 2.50" V-band with 2.50" Inch I.D./ 3 1/16" O.D. flat face.
- Adapter Side #2 Option #2: 3.00" V-band with 3.00" I.D., 3 5/8" (92mm) O.D. face side.
- Adapter Side #2 Option #3: 3.00" V-band with 3.00" I.D., 3 3/4" (95mm) O.D. face side. (Most common)
- Bolt Hole size: For use with standard 8mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 2 1/4" Inch (2.25")
- Material Type: Mild Carbon & stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

Always confirm your bolt spacing to unsure this is the correct item for your application. Fits most T25, T28, GT25, GT28 Internal wastegate exhaust housings, Including:
T25, T28, GT25, GT28, GT25R, GT2554R, GT2560R, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GT3071R-WG, GTX2860R, GTX2863R, GTX2867R, GT3076R-WG, S200, etc

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$89.90

Add to Cart

HR Transition Adapter Reducer 3" V-Band To 4" Pipe - Stainless

Made In The USA

HR 3" V-band to 4" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Also available with a 3" GT 4 bolt flange rather then the 3" V-band flange. Pick from menu. Rainbow TIG welded to perfection, very high quality & durable.

3.00" V-band is available in two Face sizes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)

Overall Thickness is available in two sizes. Select from menu.
#1: Short, 2" Thick
#2: Long, 3.75" Thick

- Brand: HIMN'I Racing
- Adapter Side #1: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side
- Adapter Side #2: 4.00" O.D. Tube, 16 Gauge stainless
- Overall Thickness/Height: Short (2") or Long (3.75") Select from menu.
- Material Type: V-Flange available in Mild Carbon or Stainless steel. Tube is all stainless by default.
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.005
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

Fits Many Turbos & exhaust with 3.00" v-band or discharge, Including: T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$69.00

Add to Cart

borgwarner s200 s300 vband adapter flange.jpg

Borg Warner S200, S300 V-Band ADAPTER Kit- Stainless

Made In USA, Himni Racing S200/S300 V-Band Flange Adapter/Converter kit. This kit adapts the Borg Warner S200 & S300 series turbos' to your existing v-band exhaust. Available in a few different versions depending on what flange is on your exhaust now... See below. Direct bolt-on, no cutting or welding required. High quality, leak-free sealing, durable, made in the USA. This item is normally always in stock & ships within 1-72 hours.

Adapter Side #1, Turbo Side:
Fits all BorgWarner S200SX & S300SX series turbos' with a 4.21" OD tapered/beveled V-band Marmon exhaust downpipe outlet. Including:
S200, S200SX, S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300, S300SX3, S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)
Or by part number, fits the following:
177258, 177267, 177329, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284 & more.

Adapter Side #2, Your Exhaust/Down Pipe Side:
Available in a few different sizes based on what size/type of V-band exhaust/downpipe you're currently using. Select from menu. Options are:
- A: For 2.50" V-Band (2.50" Inch I.D. / 3 1/16" O.D. flat face)
- B: 3" V-Band With 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face. (Standard/ Most Common 3 Inch size)
- C: 3" V-Band With 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face. (Slightly Smaller than above)
- C: 3.50" V-Band With 4.25" (4 1/4" / 107.95mm) Outer Diameter, Flat Face.

- Brand: HIMN'I Racing
- Design: S200/S300 V-Band Flange Adapter/Converter.
- Adapter Side #1: BorgWarner 4.21" Inch OD V-Band, tapered.
- Adapter Side #2: 2.5", 3" or 3.5" V-band, Flat Face.
- Overall Thickness/Height: 1.25" (1 1/4")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Finish: Excellent, Raw, Rainbow TIG welded, Smooth surface for proper sealing
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

:::NOTE:::NOTE::: Not for use with BW S200 & S300 series turbos that have a third party flat face "Ruined" turbine downpipe discharge outlet. If the back of your turbine housing has a flat v-band matting surface (rather than slightly tapered/angled) then you need Part # R12146 found on our catalog. Flat face v-bands on S200/S300 turbos are NOT genuine Borg Warner & no longer unitize BW's superior tapered flange design. If you ordered your turbo from us, your housing has not been Ruined & this item is the correct flange kit for you.

HR V-Band Flanges, adapters & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$66.00

Add to Cart

Borg Warner S200SX, S300SX3 V-Band KIT - RUINED ONLY

Made In USA, Himni Racing S200/S300 Flat Face "Ruined" V-Band Flange & clamp kit includes (x1) V-Flange & (x1) matching Clamp for Borg Warner, Air Werks S200 & S300 turbos. This kit is NOT for use with genuine BW S200/S300 turbos that retain the genuine 4.21" tapered/angled V Band. It is for use with turbos that have been Ruined with third party flat face matting surface that measures closer to 4" OD rather then the genuine 4.21"

- Design: Ruined Flat Face S200/S300 V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 3.50" Inch I.D. For 3.50" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: About 4" Inch O.D. flat face (not tappered)
- Overall Thickness/Height: 1.50" inch (1.50")
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

:::NOTE:::NOTE::: If you have a genuine BW turbo with the tapered 4.21" v-band downpipe discharge, you need item # R153501-1 on our catalog.

Fits Borg Warner turbos with Flat Face Ruined discharge, including:
S200SX
S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300SX3
S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)

Or by part number, fits the following: 177258, 177267, 177329, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284, etc

Flange is made to be used with 3.50" downpipes by default.
Use with Himni 3" To 3.5" Stainless Steel Transition Pipe to reduce flange down to a standard 3" downpipe if needed.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$49.90

Add to Cart

vband s200 s300sx3 turbo flange clamp kit.jpg

Borg Warner S200SX, S300SX3 V-Band KIT - Stainless

Made In USA, Himni Racing S200/S300 V-Band Flange & clamp kit includes (x1) V-Flange & (x1) matching Clamp for Borg Warner, Air Werks S200 & S300 turbos with 4.21" V-Band down pipe discharge outlet. Mates to the back of the turbo perfectly for a 100% leak-free seal. High quality & durable, made in the USA. This item is normally in stock & ships within 1-72 hours.

The flange is available for use with in 3", 3.5" & 4" tube/pipe sizes. Select the correct size based on what size downpipe you are using.

- Design: S200/S300 V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 3.00" or 3.50 or 4.00 Inch I.D. For 3" or 3.5" or 4" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 4.21" Inch O.D., tapered.
- Overall Thickness/Height: About 1"
- Material Type: Mild Carbon or Stainless Steel (select from menu)
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

:::NOTE:::NOTE::: Not for use with BW S200 & S300 series turbos that have a third party flat face "Ruined" turbine downpipe discharge outlet. If the back of your turbine housing has a flat v-band matting surface (rather than slightly tapered/angled) then you need Part # R12146 found on our catalog. Flat face v-bands on S200/S300 turbos are NOT genuine Borg Warner & no longer unitize BW's superior tapered flange design. If you ordered your turbo from us, your housing has not been Ruined & this item is the correct flange kit for you.

Fits Borg Warner turbos with 4.21" discharge, including:
S200SX
S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300SX3
S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)

Or by part number, fits the following:
177258, 177267, 177329, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284 & more.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

$43.90

Add to Cart

Categories

Reviews [more]

Newsletter

Turbo V-Band Flanges & Adapters

Bestsellers

Customer Testimonials

LATEST PRODUCTS

EXTRAS

GET IN TOUCH

SUPPORTS

Categories

Reviews [more]

Newsletter

Turbo V-Band Flanges & Adapters

2" V-band Exhaust Flange & Clamp Set MALE/FEMALE INTERLOCK SS

2" V-Band Turbo Exhaust Clamp - Stainless Steel

2" V-Band Turbo Flange Downpipe Exhaust Stainless

2.25" V-band Flange - Special Ni-Resist INLET Step LIP Stainless

2.5" V-Band Exhaust Downpipe Flange -DUAL STEP Stainless Steel

2.5" V-band Flange & Clamp Set - 1 & 1 DUAL STEP Stainless

2.5" V-band Flange & Clamp Set - 1 & 1 STANDARD Stainless

2.5" V-Band Turbo Exhaust Clamp - Stainless Steel

2.5" V-Band Turbo Flange Downpipe Exhaust -STANDARD Stainless

2.5" V-band Exhaust Flange & Clamp Set MALE/FEMALE INTERLOCK SS

2.5" V-Band TO 3" V-Band Exhaust Adapter Flange - Stainless

3" V-band Exhaust Flange & Clamp Set MALE/FEMALE INTERLOCK SS

3" V-band Turbo Exaust Flange & Clamp Set - 2 & 1 Stainless

3" V-Band Turbo Exhaust Clamp - Stainless Steel

3" V-Band Turbo Exhaust Flange & Clamp Set - 1 & 1- Stainless

3" V-Band Turbo Flange Downpipe Exhaust - Stainless Steel

3" V-band Flange - Special GT OUTLET Step LIP Stainless

3" V-Band Turbo Flange & Clamp Set - Special GT LIP Stainless

3" V-band Turbo Adapter Flange For T04 Housing - Weld-On

3" V-Band Turbo Flange Downpipe w/ o2 Port Stainless Steel

3.5" V-band Exhaust Flange & Clamp Set MALE/FEMALE INTERLOCK SS

3.50" V-Band Turbo Flange & Clamp Kit 1 & 1 - Stainless Steel

3.50" V-Band Turbo Flange Downpipe - Stainless Steel

3.50" V-Band Turbo Exhaust Clamp - Stainless Steel

4" V-band Exhaust Flange & Clamp Set MALE/FEMALE INTERLOCK SS