EnglishExample: S480SX
S = S Generation or S Series (T series, GT series, S series)
4 = 400 Frame Size / Model
80 = Compressor Wheel Inducer Size In millimeters (mm)
X = The highest performance, Race Built Unit
S480SX (aka S480, S480S, S400SX4)
Categories
- Turbochargers
- -AirWerks BorgWarner S Series
- -Borg Warner EFR Series
- -Garrett GT Dual Ball Bearing
- -Garrett GTW Series
- -Garrett GTX-R Dual BB Billet
- -Garrett GT Journal Bearing
- -Garrett T Series Journal Bearing
- -Garrett T Series Ball Bearing
- -Vehicle Specific Turbo Kits
- -Garrett GT Ball Bearing CHRA's
- -Compressor & Turbine Wheels
- -Garrett Compressor Housings
- -Garrett Turbine Housings
- -TiAL SS Turbine Housings
- -Other Turbo Accessories
- -Garrett Drag Race Turbo Sheet
- -Turbo Compressor & Turbine Maps
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
There are currently no product reviews.
Newsletter
Subscribe to our newsletter for periodic updates and valuable coupons.
AirWerks BorgWarner S Series
Himni Racing is your source for all AirWerks & BorgWarner turbos! AirWerks is the high performance turbo division of BorgWarner turbo systems. The 'S' Series AirWerks turbos are specifically designed for high performance & race applications. The S series turbos are defined in size & type, 1st by it's model frame size. (i.e. S200, S300, S400 etc) And 2nd by the compressor wheel inducer size. (i.e. S256, S366, S480) In some cases, the suffix "X" is added to distinguish that it's a Race Built turbo charger bread for the highest performance.
Borg Warner Air Werks S200SX-46 / S246 Turbo
"This turbo has flow capabilities ranging from 200 to 580 HP. Genuine Air Werks by Borg Warner, S200SX turbo charger with 46mm compressor wheel inducer. "aka S246, S200SX-46, S246SX & S246-SX" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side)
- Wheel: 46mm Inducer / 70mm Exducer w/ Extended Tip Technology
- Housing: 3.00" air inlet / 2.50" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 70mm Inducer / 61mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: T4 Divided twin scroll / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .83 (default) Also Available in 1.00, 1.15 & 1.22 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT) Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
$632.00
Borg Warner Air Werks S200SX-50 / S250 Turbo
This turbo has flow capabilities ranging from 200 to 580 HP. Genuine Air Werks by Borg Warner, S200SX turbo charger with 50mm compressor wheel inducer, also known as the S250, S200SX-50, S250SX & S250-SX. This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side)
- Wheel: 50mm Inducer / 70mm Exducer w/ Extended Tip Technology
- Housing: 3.00" air inlet / 2.50" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 70mm Inducer / 61mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: T4 Divided twin scroll / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: 1.09 (default) Also Available in 1.00, 1.15 & 1.22 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire.
Borg Warner Air Werks S200SX-51 / S251 Turbo
"This turbo has flow capabilities ranging from 200 to 580 HP. Genuine Air Werks by Borg Warner, S200SX turbo charger with 51mm compressor wheel inducer "aka S251, S200SX-51, S251SX & S251-SX" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side)
- Wheel: 51mm Inducer / 70mm Exducer w/ Extended Tip Technology
- Housing: 3.00" air inlet / 2.50" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 70mm Inducer / 61mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: T4 Divided twin scroll / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .83 (default) Also Available in 1.00, 1.15 & 1.22 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
Borg Warner Air Werks S200SX-56 / S256 Turbo
This turbo has flow capabilities ranging from 200 to 580 HP. Genuine Air Werks by Borg Warner, S200SX turbo charger with 56mm compressor wheel inducer, also known as the S256, S200SX-56, S256SX & S256-SX. This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side)
- Wheel: 56mm Inducer / 76.1mm Exducer w/ Extended Tip Technology
- Housing: 3.00" air inlet / 2.50" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 70mm Inducer / 61mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: T4 Divided twin scroll / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: 1.22 (default) Also Available in 1.00, 1.15 & 1.22 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire.
Borg Warner Air Werks S300SX3-60/S360 Turbo (Type A) FREE SHIP!
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
"This turbo has flow capabilities ranging from 500 to 800 HP. Genuine Air Werks by Borg Warner, S300SX3 turbo charger with 60mm compressor wheel inducer. "aka 83-75, S360, S300SX3-60, S360SX & S360-SX3" Available with a undivided or twin scroll (divided) turbine housing. (select from menu & note picture for details) This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output. This turbo is comparable to the GT3582R but is capable of flowing more air at higher pressures (46.5 psi)
NOTE:: This turbo is the Type A (straight comp outlet) with a T4 .91 A/R DIVIDED turbine housing by default & straight charge pipe outlet, as seen in the picture.
::Compressor:: (cold side) Over 65 lb/min.
- Wheel: 60mm Inducer / 83.5mm Exducer w/ Extended Tip Technology
- Housing: Large 4.00" ported anti-surge air inlet / 3.00" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 76.1mm Inducer / 68mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: T4 Divided twin scroll / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .91 Divided (default) Also Available in:
.88 Undivided & 1.00 Divided A/R's
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
Borg Warner Air Werks S300SX3-66/ S366 Turbo (Type A) FREE SHIP!
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
"This turbo has flow capabilities ranging from 500 to 830 HP. Genuine Air Werks by Borg Warner, S300SX3 turbo charger with 66mm compressor wheel inducer. "aka 91-79, S366, S300SX3-66, S366SX & S366-SX3" Available with a undivided or twin scroll (divided) turbine housing. (select from menu & note picture for details) This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high horsepower output good for over 45 psi.
NOTE:: This turbo is the Type A (straight comp outlet) with the T4 .91 A/R turbine housing by default & straight charge pipe outlet, as seen in the picture.
::Compressor:: (cold side) Over 78 lb/min.
- Wheel: 66mm Inducer / 91.4mm Exducer w/ Extended Tip Technology
- Housing: Large 4.00" ported anti-surge air inlet / 3.00" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 80mm Inducer / 73mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: T4 Divided twin scroll / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .91 Divided (default) Also Available in .88 Undivided A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
Borg Warner Air Werks S300SX3-60 / S360 Turbo (Type B)
"This turbo has flow capabilities ranging from 400 to 800 HP. Genuine Air Werks by Borg Warner, S300SX3 turbo charger with 60mm compressor wheel inducer. "aka S360, S300SX3-60, S360SX & S360-SX3" Available with a undivided or twin scroll (divided) turbine housing. (select from menu & note picture for details) This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
NOTE:: This turbo is the Type B (90 degree comp outlet) with the T4 Undivided .88 A/R turbine housing by default & 90 degree charge pipe outlet, as seen in the picture.
::Compressor:: (cold side)
- Wheel: 60mm Inducer / 83.5mm Exducer w/ Extended Tip Technology
- Housing: Large 4.00" ported anti-surge air inlet / 90 degree 3.00" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 76.1mm Inducer / 68mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing Option #1: (T04) T4 .88 A/R Undivided w/ V-band downpipe exist
- Housing Option #2: (T04) T4 .91 A/R Divided w/ V-band downpipe exist
- Housing Option #3: (T04) T4 1.00 A/R Divided w/ V-band downpipe exist
- Downpipe v-band flange size: 3.12" ID, 4.21" ID (Use flange kit part number R153501-1 or R153001-1 found on our site)
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
Borg Warner Air Werks S300SX3-63/ S363 Turbo (Type B) FREE SHIP!
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
"This turbo has flow capabilities ranging from 400 to 800 HP. Genuine Air Werks by Borg Warner, S300SX3 turbo charger with 63mm compressor wheel inducer. "aka 88/75, S363, S300SX3-63, S363SX & S363-SX3" Available with a undivided or twin scroll (divided) turbine housing. (select from menu & note picture for details) This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output. Comparable in size to the T04Z, PT67 & GT37R.
NOTE:: This turbo is the Type B (90 degree comp outlet) with the T4 Undivided .88 A/R turbine housing by default & 90 degree charge pipe outlet, as seen in the picture.
::Compressor:: (cold side)
- Wheel: 63mm Inducer / 88 mm Exducer w/ Extended Tip Technology
- Housing: Large 4.00" ported anti-surge air inlet / 3.00" 90 degree charge pipe outlet
::Turbine:: (hot side)
- Wheel: 76.1mm Inducer / 68mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: (T04) T4 Undivided / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .88 (default) Also Available in .91 divided & 1.00 divided A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
Borg Warner Air Werks S300SX3-66/ S366 Turbo (Type B) FREE SHIP!
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
"This turbo has flow capabilities ranging from 400 to 800 HP. Genuine Air Werks by Borg Warner, S300SX3 turbo charger with 66mm compressor wheel inducer. "aka S366, S300SX3-66, S366SX & S366-SX3" Available with a undivided or twin scroll (divided) turbine housing. (select from menu & note picture for details) This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
NOTE:: This turbo is the Type B (90 degree comp outlet) with the T4 divided turbine housing by default & 90 degree charge pipe outlet, as seen in the picture.
::Compressor:: (cold side)
- Wheel: 66mm Inducer / 91.4mm Exducer w/ Extended Tip Technology
- Housing: Large 4.00" ported anti-surge air inlet / 3.00" 90 degree charge pipe outlet
::Turbine:: (hot side)
- Wheel: 79.7mm Inducer / 73mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: (T04) T4 divided or undivided / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .91 divided (default) Also Available with a undivided .88 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
Borg Warner Air Werks S400SX3-71 / S471 Turbo (T4 Turbine)
"This turbo has flow capabilities ranging from 500 to 800 HP. Genuine Air Werks by Borg Warner, S400SX3 turbo charger with 71mm compressor wheel inducer. "aka S471 (T4) S400SX3-71, S471SX & S471-SX3" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side) Over 88 lb/min
- Wheel: 71.4mm Inducer / 100.8mm Exducer w/ Extended Tip Technology
- Housing: (select from menu)
#1. 5.00" ported anti-surge air inlet / 3.50" V-band flange charge pipe outlet.
#2 Large High Flow Race Cover w/ 5.50" air inlet/ 3" slip-on charge pipe outlet with ballistic attenuator. (has tapered funnel/velocity stack fitted on the inside of the air inlet)
::Turbine:: (hot side)
- Wheel: 83.5mm Inducer / 74mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: (T04) T4 Divided twin scroll / 4.00" V-band flange downpipe discharge
- A/R: 1.10 (default) Also Available in .90, 1.00 & 1.25 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
Borg Warner Air Werks S400SX3/ S475 Turbo (T4 Turbine) FREE SHIP
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
"This turbo has flow capabilities ranging from 500 to 800 HP. Genuine Air Werks by Borg Warner, S400SX3 turbo charger with 75mm compressor wheel inducer. "aka S475 (T4) S400SX3-75, S475SX & S475-SX3" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side) Over 98 lb/min
- Wheel: 75mm Inducer / 100.8mm Exducer w/ Extended Tip Technology
- Housing: (select from menu)
#1. 5.00" ported anti-surge air inlet / V-band flange charge pipe outlet.
#2 Large High Flow Race Cover w/ 5.50" air inlet/ 3" slip-on charge pipe outlet with ballistic attenuator. (has tapered funnel/velocity stack fitted on the inside of the air inlet)
::Turbine:: (hot side)
- Wheel: 83.5mm Inducer / 74mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: (T04) T4 Divided twin scroll / 4.00" V-band flange downpipe discharge
- A/R: 1.10 (default) Also Available in .90, 1.00 & 1.25 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
Borg Warner Air Werks S400SX4-71 / S471 Turbo (T6 Turbine)
"This turbo has flow capabilities ranging from 500 to 1050 HP. Genuine Air Werks by Borg Warner, S400SX4 turbo charger with 71mm compressor wheel inducer. "aka S471 (T6) S400SX4-71, S471SX & S471-SX4" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side) Over 88 lb/min
- Wheel: 71.4mm Inducer / 100.8mm Exducer w/ Extended Tip Technology
- Housing: (select from menu)
#1. 5.00" ported anti-surge air inlet / V-band flange charge pipe outlet.
#2 Large High Flow Race Cover w/ 5.50" air inlet/ 3" slip-on charge pipe outlet with ballistic attenuator. (has tapered funnel/velocity stack fitted on the inside of the air inlet)
::Turbine:: (hot side)
- Wheel: 95.7mm Inducer / 88mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: Large T6 Divided twin scroll / 5.00" V-band flange downpipe discharge
- A/R: 1.32
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
Borg Warner Air Werks S400SX4/ S475 Turbo (T6 88mm) FREE SHIP!
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
This the S400SX4-75 with the larger 88mm turbine wheel & with the 1.32 A/R turbine housing.
"Flow capabilities ranging from 500 to 1050 HP. Genuine Air Werks by Borg Warner, S400SX4 turbo charger with 75mm compressor wheel inducer. "aka S475 (T6) S400SX3-75, S475SX & S475-SX3" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side) Over 98 lb/min
- Wheel: 75mm Inducer / 100.8mm Exducer w/ Extended Tip Technology
<
- Housing: (select from menu)
#1. 5.00" ported anti-surge air inlet / V-band flange charge pipe outlet.
#2 Large High Flow Race Cover w/ 5.50" air inlet/ 3" slip-on charge pipe outlet with ballistic attenuator. (has tapered funnel/velocity stack fitted on the inside of the air inlet)
::Turbine:: (hot side)
- Wheel: 95.7mm Inducer / 88mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: Large T6 Divided twin scroll inlet/ 5.00" V-band flange downpipe discharge
- A/R: 1.32 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
Borg Warner Air Werks S400SX4-75 / S475 Turbo (T6 74mm)
This turbo is the S400SX4-75 with the smaller 74mm turbine wheel & with more turbine housing sizes available.
"Flow capabilities ranging from 500 to 1050 HP. Genuine Air Werks by Borg Warner, S400SX4 turbo charger with 75mm compressor wheel inducer & 74mm turbine wheel. "aka S475 (T6) S400SX3-75, S475SX & S475-SX3" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side) Over 98 lb/min
- Wheel: 75mm Inducer / 100.8mm Exducer w/ Extended Tip Technology
<
- Housing: (select from menu)
#1. 5.00" ported anti-surge air inlet / V-band flange charge pipe outlet.
#2 Large High Flow Race Cover w/ 5.50" air inlet/ 3" slip-on charge pipe outlet with ballistic attenuator. (has tapered funnel/velocity stack fitted on the inside of the air inlet)
::Turbine:: (hot side)
- Wheel: 83.5mm Inducer / 74mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: Large T6 inlet/ 5.00" V-band flange downpipe discharge
- A/R: 1.10 (default) Also available with .90, 1.00 & 1.25 A/R (select from menu)
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
Borg Warner Air Werks S400SX4/ S480 Turbo FREE SHIP!
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
"This turbo has flow capabilities ranging from 750 to 1250 HP. Genuine Air Werks by Borg Warner, S400SX4 turbo charger with 80mm compressor wheel inducer. "aka S480 S400SX4-80, S480SX & S480-SX4" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side) Over 120 lb/min.
- Wheel: 80.3mm Inducer / 115.8mm Exducer w/ Extended Tip Technology
- Housing: Large 5.50" ported anti-surge air inlet / 3.00" slip on charge pipe outlet
::Turbine:: (hot side)
- Wheel: 96mm Inducer / 88mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: Large T6 Divided twin scroll / 5.00" V-band flange downpipe discharge
- A/R: 1.32
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
Bestsellers
Customer Testimonials
Genuine Brands
Perfect
I ordered a Tial blow off valve and it was at my door in only 3 days! The serial number checked out with TiAl as authentic. No one else had the color......
Read More ->
Perfect
THANK YOU FOR THE EXTREMELY FAST SHIPPING!! HIMNI RACING HAS GREAT PRODUCTS!!
-Eric G. Cape Coral, FL...
Read More ->
