Allen Head Bolt. Many uses. 10mm thread x 1.25 pitch. 8mm wrench size. Price per bolt. Minimum order quantity: 4
$1.59This Compressor Housing Back plate adapter ring goes between CHRA and compressor housing on turbos GT2560R through GT35R. This is the plate that mounts the compressor housing to the CHRA. Factory Garrett part.
Select the correct back plate based on what turbine housing you have. Fits the following turbochargers:
GT28, GT28R, GT2860R, GT2660RS, GT2871R, GTX2860R, GTX2863R, GTX2867R, GT2876R, GT3071, GT3071R-WG, GT3076R-WG, GT3071R, GTX3071R, GT30, GT30R, GTX3067R, GT3076R, GTX3076R, GT3040R, GT3082R, GT35, GT35R, GTX35R, GTX3576R, GT3582R, GTX3582R, etc.
Minimum order quantity: 4
This common size 10mm premium copper clad, hi-heat, exhaust lock nut is ideal to connect turbochargers to exhaust manifolds, headers to engine blocks, downpipe to turbo, etc. Top lock design holds strong under demanding conditions & not prone to seizing like standard steel nuts. Price is per nut. Minimum order quantity: 4
Thread size: 10mm
Thread Pitch: 1.50
Minimum order quantity: 4
This common size 8mm premium copper clad, hi-heat, exhaust lock nut is ideal to connect turbochargers to exhaust manifolds, headers to engine blocks, downpipe to turbo, etc. Top lock design holds strong under demanding conditions & not prone to seizing like standard steel nuts. Price is per nut. Minimum order quantity: 4
Thread size: 8mm
Thread Pitch: 1.25
For T25/T28 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
For T3 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
10mm X 1.50 thread pitch stud.
This common size 10mm exhaust stud is ideal for use on exhaust/hi-heat connections. (turbochargers to exhaust manifolds, headers to engine blocks, downpipe to turbo, etc.) Made of hardened steel for long life. Price is per stud. Minimum order quantity: 4
Thread size: 10mm
Thread Pitch: 1.50
Short side thread length: .5 inch
Long side thread length: 1.25 inch
Dead thread (unthreaded area): .25 inch
Overall length: 1.5 inch
8mm X 1.25 thread pitch stud.
This common size 8mm exhaust stud is ideal for use on exhaust/hi-heat connections. (turbochargers to exhaust manifolds, headers to engine blocks, downpipe to turbo, etc.) Made of hardened steel for long life. Price is per stud. Minimum order quantity: 4
Thread size: 8mm
Thread Pitch: 1.25
Short side thread length: .5 inch
Long side thread length: 1.25 inch
Dead thread (unthreaded area): .25 inch
Overall length: 2 inch
Garrett T25/T28, T3, GT & some T4 turbo heat shield.
A quality turbo heat shield will reduce the amount of radiant heat coming from the turbo & helps to lower engine bay temperatures. It helps to protect other sensitive engine components from the extreme heat. Safer for the turbo then a heat blankest, as it allows the turbo to still vent the heat. Also a great way to increase the appearance of the turbo by covering the turbine/ exhaust housing!
This is a Garrett Heat shield that fits many types & brands of turbos. Made to work with many different turbos. Works with most brands Including Garrett, Turbonetics, HKS, GReddy, etc.
Fits many turbos using T25/T28 & T3 exhaust housings, including:
T25, T28, T3, T3/T4, T3/T04E, TD04, TD05, 16G, 18G, 20G, GT25R, GT28R, GT28RS, GT2871R, GT2876R, GT3071R-WG, GT3076R-WG, GT3071R, GT3076R, GT30R, GT3040R, GT3082R, GT35R, GT3582R, GT35R, GT3540R & some small T4 housings.
Special Tial turbine housing clamp plates and bolt kit for all Garrett GT28R/GT30R/GT53R turbos using a Tial stainless steel turbine/exhaust housing. Used to install the turbine housing to the turbo. Full kit includes everything needed to install.
Fits Tial SS housings for the following turbos:
GT28R, GT2560R, GT28RS, GT2860RS, GTX2860R, GTX2863R, GTX2867R, GT2871R, GT2876R, GT3071R, GTX3071R, GTX3067R, GT30R, GT3076R, GTX3076R, GTX3576R, GT35R, GT3582R, GTX3582R
Actual item may vary from picture.
$101.63Turbine housing clamp plates and bolt kit for all Garrett GT25R-GT53R turbos using T25, T3 & T4 housings w/ 6 bolt mounting pad. Used to install the turbine housing to the CHRA (rotating assembly) This is the standard Garrett turbo hardware.
Includes (x2) half circle clamp plates and (x6) bolts.
Fits: GT25R, GT254R, GT28R, GT2560R, GT28RS, GT2860RS, GT2871R, GT2876R, GT2540R, GT3071R, GT30R, GT3076R, GT35R, GT3582R, GT3540R
Note: Does not fit special housings: GT32, GT40, GT42 and the .78 A/R T3 divided V-band housing for the GT30/GT35.
$18.00Compressor housing clamp plates and bolt kit for all Garrett GT25R-GT53R turbos. Also for a variety of T3 & T4 turbos & the GT40R. Select your compressor housing type from menu. Used to install the turbo compressor to the black plate on the CHRA (rotating assembly) This is the standard Garrett turbo hardware.
Includes required clamp plates and bolts.
Fits: Garrett GT25R, GT254R, GT28R, GT2560R, GT28RS, GT2860RS, GT2871R, GT2876R, GT2540R, GT3071R, GT30R, GT3076R, GT35R, GT3582R, GT3540R, T3, T3/T4, T04B, T04E, 60-1, T04S, T61, T67, T04S, T04R, T04Z, GT3788R, GT40, GT40R, GT4088, GT4088R, GT4094, GT4094R, GTX4088R
Identify your compressor housing.
-T04B: uses 3 individual plates, has an inlet size of 2.00”-3.00” diameter & outlet size of 2” (3” inlet/2” outlet most common)
-T04E: uses 2 long plates, has in inlet size of 2.75”-4.00” diameter & outlet size of 2” (2.75” & 4” inlet/2” outlet most common)
-T04S: uses 3 individual plates, has an inlet size of 4.00” diameter & outlet size of 2.50”
-GT2560R & GT4088R/GT4094R use their own sizes. (add note during checkout)
This 95MM Retaining ring hold the turbo compressor housing back plate to the CHRA on all Garrett GT25R-GT35R ball bearing turbos. Garrett Part # 400589-0375
Fits: GT25R, GT254R, GT28R, GT2560R, GT28RS, GT2860RS, GT2871R, GT2876R, GT2540R, GT3071R, GT30R, GT3076R, GT35R, GT3582R, GT3540R
$5.506.00" O.D. Bell-Mouth Inlet, 2.50" O.D. Outlet (turbo connection side)
Vibrant Performance high efficiency Bell-Mouth Turbo Velocity Stack is ideal for All Motor and Forced Induction race applications. Reduced turbulent air entering a turbo or N/A engine, resulting in dramatic airflow improvements and ultimately significant torque and horsepower gains. Can help reduce turbo lag & spun from a one piece 1/8” thick T6061 Aluminum Alloy.
This item is normally in stock & ships in 24-48 hours. A full range of sizes available from 6.00" - 8.00" bell-mouths to fit 2.50" -5.00" sized turbo chargers.
$46.006.00" O.D. Bell-Mouth Inlet, 3.00" O.D. Outlet (turbo connection side)
Vibrant Performance high efficiency Bell-Mouth Turbo Velocity Stack is ideal for All Motor and Forced Induction race applications. Reduced turbulent air entering a turbo or N/A engine, resulting in dramatic airflow improvements and ultimately significant torque and horsepower gains. Can help reduce turbo lag & spun from a one piece 1/8” thick T6061 Aluminum Alloy.
This item is normally in stock & ships in 24-48 hours. A full range of sizes available from 6.00" - 8.00" bell-mouths to fit 2.50" -5.00" sized turbo chargers.
$46.006.00" O.D. Bell-Mouth Inlet, 3.50" O.D. Outlet (turbo connection side)
Vibrant Performance high efficiency Bell-Mouth Turbo Velocity Stack is ideal for All Motor and Forced Induction race applications. Reduced turbulent air entering a turbo or N/A engine, resulting in dramatic airflow improvements and ultimately significant torque and horsepower gains. Can help reduce turbo lag & spun from a one piece 1/8” thick T6061 Aluminum Alloy.
This item is normally in stock & ships in 24-48 hours. A full range of sizes available from 6.00" - 8.00" bell-mouths to fit 2.50" -5.00" sized turbo chargers.
$46.007.00" O.D. Bell-Mouth Inlet, 4.00" O.D. Outlet (turbo connection side)
Vibrant Performance high efficiency Bell-Mouth Turbo Velocity Stack is ideal for All Motor and Forced Induction race applications. Reduced turbulent air entering a turbo or N/A engine, resulting in dramatic airflow improvements and ultimately significant torque and horsepower gains. Can help reduce turbo lag & spun from a one piece 1/8” thick T6061 Aluminum Alloy.
This item is normally in stock & ships in 24-48 hours. A full range of sizes available from 6.00" - 8.00" bell-mouths to fit 2.50" -5.00" sized turbo chargers.
$56.008.00" O.D. Bell-Mouth Inlet, 5.00" O.D. Outlet (turbo connection side)
Vibrant Performance high efficiency Bell-Mouth Turbo Velocity Stack is ideal for All Motor and Forced Induction race applications. Reduced turbulent air entering a turbo or N/A engine, resulting in dramatic airflow improvements and ultimately significant torque and horsepower gains. Can help reduce turbo lag & spun from a one piece 1/8” thick T6061 Aluminum Alloy.
This item is normally in stock & ships in 24-48 hours. A full range of sizes available from 6.00" - 8.00" bell-mouths to fit 2.50" -5.00" sized turbo chargers.
$66.00Allen Head Bolt. Many uses. 8mm thread x 1.25 pitch. 6mm wrench size. Price per bolt. Minimum order quantity: 4
$1.35Fast shipping and thoughtfull custoemer service. Laffy taffy happens to be my favorite thanks.
- Alexsandro M. Covington, VA...
Read More ->
Oh my goodness! Fastest shipping I have ever experienced from the US! Many thanks
- James S. Ontario, Canada...
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.