T4 DIVIDED 3" V-band Turbine Housing 1.06 A/R - GT3082R

Replacement Turbine / Exhaust Housing, T4 DIVIDED with 3" V-band outlet & 1.06 A/R. For Garrett GT3082R (aka GT3040R) with 60mm turbine wheel.

This is the exhaust/turbine housing only. Large 1.06 A/R, T4 (T04) divided twin-scroll inlet (exhaust manifold side) with 3.00" V-Band exit. (downpipe side) Fits Garrett GT3082R, GT3040R turbos. Direct bolt on & replaces/upgrades your existing housing.

Installing & replacing your turbine housing is very simple. Once the turbo is removed from the car, the new housing is installed by simply removing the (6) 1/2" mounting bolts holding the turbine housing to the center cartridge. The old housing then slips right off & the new housing goes back on in the reverse order. Some applications do not require that the whole turbo even be removed from the car depending on available space & leverage. This is a 1 out of 10 in difficulty.

Turbine housings are often changed or replaced for various reasons such as:
- To allow the turbo to be used with a new application, exhaust manifold or downpipe.
- To obtain a more desirable A/R size for your application.