Categories
- Turbochargers
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- -Univesal Modular & Downpipes
- -Stainless Steel Pipes & Bends
- -Exhaust Accessories
- -Exhaust Flex Joints (Stainless)
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
English
3/8" Stainless Steel Straight Rod
Price is per foot.
3/8" 304 Stainless steel solid straight rod stock. Great for exhaust hangers for custom exhaust systems, manifold bracing, brackets, etc. Easy to weld & bend but still very strong.
Ship size is up to 3 foot sections.
$7.95
Boost Exhaust Cut-Out - Full-ASSEMBLY (OUT OF STOCK)
This item is OUT OF STOCK & ON BACKORDER with no ETA available. A Wide Open exhaust that's boost activated!! Great for stock or performance exhaust systems.
Pick the pipe diameter form above, that best suits your exhaust. Can be clamped or welded into place.
This boost activated exhaust cut-out completely bypasses, on demand, the restrictive exhaust system only when boost is present. As soon as a turbocharger or supercharger spools, the cut-out valve automatically begins to open. By the time the turbo or supercharger makes full boost, the valve is fully open. The exhaust flow dumps out the side of the cut-out valve, relieving all the unwanted exhaust system restriction & back pressure to allow the engine to make it's maximum horse power. As soon as you lift off the gas or drop the boost pressure, the cut-out valve closes again & the pressure flows through the exhaust system as usual.
Totally quiet and stock-like sounding during startup, idle, cruising, stopping, etc.
No delay in valve response, yet very smooth transition into boost/open mode.
Automatic opening & closing, using existing boost source on a turbo engine and does not rely on nuts or electrical motors.
You can integrate a boost controller to control when the valve opens or completely turn it off.
Takes care of virtually all complaints associated with large 3” cat-back exhaust systems.
Note: Very EZ installation... Mounts inline of the exhaust system & can be clamped or welded into place. A vacuum hose runs from a boost reference source (i.e. the turbo or supercharger it's self, a intake manifold nipple, intercooler tubing, etc.) directly to the cut-out valve.
$269.00
Himni 2.5" To 3" Transition Reducer Pipe/Tube- Stainless Steel
Made In USA. HR 2.50" to 3.00" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Low pro design. Made in the USA using only USA manufactured tubing.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 2.50 Inch TO 3.00 inch SS transition.
- Adapter Side #1: 2.5" O.D. (63mm)
- Adapter Side #2: 3" O.D. (76mm)
- Overall Height/Length: 1.00" (25mm)
- Material Type: 16 Gauge US Stainless Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Himni 3" To 4" Transition Reducer Pipe/Tube Stainless Steel LONG
Made In USA. HR "LONG VERSION" 3.00" to 4.00" Stainless Steel Smooth Transition reducer pipe/tube. Perfect for increasing or decreasing pipe diameter. Solid 304 stainless steel. A very nice piece. Legs can be cut/removed to reduced overall length if needed. Made in the USA using only USA manufactured tubing. Similar to part number R12S365 but longer.
Many uses such as:
Increase or decrease downpipe size.
Increase or decrease exhaust pipe size
Increase or decrees intercooler tubing size
Increase or decrease air intake size.
- Brand: HIMN'I Racing
- Design: 3.00 Inch TO 4.00 inch SS transition. (Long Version)
- Adapter Side #1: 3" O.D. (76mm)
- Adapter Side #2: 4" O.D. (102mm)
- Overall Height/Length: 3.50" (88.9mm) long w/ legs, 1.75" (44.45mm) long if legs are removed.
- Material Type: 16 Gauge US Stainless Steel
- Welding characteristics: Excellent
- Finish: Good, Raw, Smooth
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to not crack or otherwise fail.
Stainless Steel O2 Sensor Bung Fitting & Plug Set: 18mm
Made In USA, CNC machined Stainless Steel o2 sensor bung & plug set is designed to an o2 sensor anyplace you need one or, for plugging off a exciting hole. Great for custom or aftermarket exhaust, headers, down pipes or for adding a extra o2 sensor for use with a wideband.
-Standard 18mm thread size will fit most OEM & Aftermarket sensors including Bosch units. The set includes a FREE, reusable, Aluminum gasket for use with the plug to insure 100% leak-free sealing when sensor is not in use.
Includes:
-CNC Machined 18mm Stainless Steel o2 Bung
-Steel o2 Plug
-Reusable Aluminum Gasket
Stainless Steel O2 Sensor Bung Fitting Adapter:18mm
Made In USA, CNC machined Stainless Steel o2 sensor bung is designed for adding a o2 sensor anyplace you need one. Great for custom or aftermarket exhaust, headers, down pipes or for adding a extra o2 sensor for use with a wideband.
-Standard 18mm thread size will fit most OEM & Aftermarket sensors including Bosch units.
$7.98Bestsellers
Customer Testimonials
I called and placed my order over the phone. I had a bunch of questions and the lady was kind and very helpful. She made sure I got all the right......
Read More ->
Fast From The US
very fast shipping for international!!!! thank you & i will be back for more soon.
-Michael E. Rattelsdorf, Germany...
Read More ->
