The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -10 AN female (works with all -10 AN male fittings/adapters)
Type: 45 Degree
Works with hose size: -10
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -10 AN female (works with all -10 AN male fittings/adapters)
Type: 90 Degree
Works with hose size: -10
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -10 AN female (works with all -10 AN male fittings/adapters)
Type: Straight
Works with hose size: -10
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -4 AN female (works with all -4 AN male fittings/adapters)
Type: 45 Degree
Works with hose size: -4
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -4 AN female (works with all -4 AN male fittings/adapters)
Type: Straight
Works with hose size: -4
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -6 AN female (works with all -6 AN male fittings/adapters)
Type: 45 Degree
Works with hose size: -6
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -6 AN female (works with all -6 AN male fittings/adapters)
Type: 90 Degree
Works with hose size: -6
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -6 AN female (works with all -6 AN male fittings/adapters)
Type: Straight
Works with hose size: -6
Finish: Hard black anodized
Material: Aircraft grade aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -6 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -4 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -4 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -6 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -6 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -6 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -8 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -6 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -6 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -8 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -8 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -8 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -10 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -8 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -8 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -10 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -10 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -10 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -12 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -8 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -8 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -12 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -10 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -10 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -12 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -12 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -12 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Pushlock design with slip on barb. The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all rubber & silicone hose. PushLock hose end (1 piece design) Removable & reusable. New low pricing, below retail!
Note: The PushLock barb design on these hose ends are very good. Normally doesn't need to be used with hose clamps but you can use them for added leak-free security.
Hose end size: -10 AN female (works with all -10 AN male fittings/adapters)
Type: 45 Degree
Works with hose: 5/8" ID Rubber & silicone
Finish: Hard black anodized
Material: Aircraft grade aluminum
Pushlock design with slip on barb. The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all rubber & silicone hose. PushLock hose end (1 piece design) Removable & reusable. New low pricing, below retail!
Note: The PushLock barb design on these hose ends are very good. Normally doesn't need to be used with hose clamps but you can use them for added leak-free security.
Hose end size: -10 AN female (works with all -10 AN male fittings/adapters)
Type: 90 Degree
Works with hose: 5/8" ID Rubber & silicone
Finish: Hard black anodized
Material: Aircraft grade aluminum
Pushlock design with slip on barb. The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all rubber & silicone hose. PushLock hose end (1 piece design) Removable & reusable. New low pricing, below retail!
Note: The PushLock barb design on these hose ends are very good. Normally doesn't need to be used with hose clamps but you can use them for added leak-free security.
Hose end size: -10 AN female (works with all -10 AN male fittings/adapters)
Type: Straight
Works with hose: 5/8" ID Rubber & silicone
Finish: Hard black anodized
Material: Aircraft grade aluminum
Pushlock design with slip on barb. The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all rubber & silicone hose. PushLock hose end (1 piece design) Removable & reusable. New low pricing, below retail!
Note: The PushLock barb design on these hose ends are very good. Normally doesn't need to be used with hose clamps but you can use them for added leak-free security.
Hose end size: -6 AN female (works with all -6 AN male fittings/adapters)
Type: 45 Degree
Works with hose: 3/8" ID Rubber & silicone
Finish: Hard black anodized
Material: Aircraft grade aluminum
Pushlock design with slip on barb. The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all rubber & silicone hose. PushLock hose end (1 piece design) Removable & reusable. New low pricing, below retail!
Note: The PushLock barb design on these hose ends are very good. Normally doesn't need to be used with hose clamps but you can use them for added leak-free security.
Hose end size: -6 AN female (works with all -6 AN male fittings/adapters)
Type: 90 Degree
Works with hose: 3/8" ID Rubber & silicone
Finish: Hard black anodized
Material: Aircraft grade aluminum
Pushlock design with slip on barb. The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all rubber & silicone hose. PushLock hose end (1 piece design) Removable & reusable. New low pricing, below retail!
Note: The PushLock barb design on these hose ends are very good. Normally doesn't need to be used with hose clamps but you can use them for added leak-free security.
Hose end size: -6 AN female (works with all -6 AN male fittings/adapters)
Type: Straight
Works with hose: 3/8" ID Rubber & silicone
Finish: Hard black anodized
Material: Aircraft grade aluminum
-10 AN JIC Male TO 1/2" NPT Male Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -10 AN JIC Male To 1/2" NPT Male
Type: Straight
Finish: Hard black anodized
Material: Aircraft grade aluminum
-4 AN JIC Male TO Male Union Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -4 AN JIC Male To Male (works with all -4 AN female hose ends)
Type: Straight
Finish: Hard black anodized
Material: Aircraft grade aluminum
-6 AN JIC Male TO 1/2" NPT Male Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -6 AN JIC Male To 1/2" NPT Male
Type: Straight
Finish: Hard black anodized
Material: Aircraft grade aluminum
-6 AN JIC Male TO Male 1/4" NPT Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -6 AN JIC Male To 1/4" NPT Male
Type: Straight
Finish: Hard black anodized
Material: Aircraft grade aluminum
-6 AN JIC Male TO 1/4" NPT Male, 45 degree Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -6 AN JIC Male To 1/4" NPT Male
Type: 45 degree
Finish: Hard black anodized
Material: Aircraft grade aluminum
-6 AN JIC Male TO Male Union Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -6 AN JIC Male To Male (works with all -6 AN female hose ends)
Type: Straight
Finish: Hard black anodized
Material: Aircraft grade aluminum
-8 AN JIC Male TO 1/2" NPT Male Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -8 AN JIC Male To 1/2" NPT Male
Type: Straight
Finish: Hard black anodized
Material: Aircraft grade aluminum
Black anodized 1/2" NPT plug with allen wrench head. Great for plugging fuel, oil, coolant plugs, or fuel rail end.
$6.50-10 Stainless steel braided hose for use with -10 AN hose ends. Price is per foot & will be sent as one piece (i.e. Order 10 feet, you'll receive a 10 foot length) Very high quality & works with fuel, oil, water, coolant, etc. Outside SS braid & inner fiber reinforced. Suitable for high heat & pressure applications. Not for use with PushLock hose ends. Is not prone to folding/pinching when used in tight bends.
Size: -10 (works with all -10 AN female hose ends. not pushlock)
$9.99-4 Stainless steel braided hose for use with -4 AN hose ends. Price is per foot & will be sent as one piece (i.e. Order 10 feet, you'll receive a 10 foot length) Very high quality & works with fuel, oil, water, coolant, etc. Outside SS braid & inner fiber reinforced. Suitable for high heat & pressure applications. Not for use with PushLock hose ends. Is not prone to folding/pinching when used in tight bends.
Size: -4 (works with all -4 AN female hose ends. not pushlock)
$8.25-6 Stainless steel braided hose for use with -6 AN hose ends. Price is per foot & will be sent as one piece (i.e. Order 10 feet, you'll receive a 10 foot length) Very high quality & works with fuel, oil, water, coolant, etc. Outside SS braid & inner fiber reinforced. Suitable for high heat & pressure applications. Not for use with PushLock hose ends. Is not prone to folding/pinching when used in tight bends.
Size: -6 (works with all -6 AN female hose ends. not pushlock)
$8.75-6 Pushlock hose (3/8" ID) for use with -6 PushLock hose ends, & standard barbs. Price is per foot & will be sent as one piece (i.e. Order 10 feet, you'll receive a 10 foot length) High quality, fiber reinforced has a working pressure up to 300 PSI Works with fuel, oil, water, coolant, etc.
Size: -6 PushLock 3/8" ID (works with all -6 AN PushLock hose ends)
$6.75very fast shipping for international!!!! thank you & i will be back for more soon.
-Michael E. Rattelsdorf, Germany...
Read More ->
Fast shipping and thoughtfull custoemer service. Laffy taffy happens to be my favorite thanks.
- Alexsandro M. Covington, VA...
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.