The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -10 AN female (works with all -10 AN male fittings/adapters)
Type: 45 Degree
Works with hose size: -10
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -10 AN female (works with all -10 AN male fittings/adapters)
Type: 90 Degree
Works with hose size: -10
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -10 AN female (works with all -10 AN male fittings/adapters)
Type: Straight
Works with hose size: -10
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -4 AN female (works with all -4 AN male fittings/adapters)
Type: 45 Degree
Works with hose size: -4
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -4 AN female (works with all -4 AN male fittings/adapters)
Type: Straight
Works with hose size: -4
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -6 AN female (works with all -6 AN male fittings/adapters)
Type: 45 Degree
Works with hose size: -6
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -6 AN female (works with all -6 AN male fittings/adapters)
Type: 90 Degree
Works with hose size: -6
Finish: Hard black anodized
Material: Aircraft grade aluminum
The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all stainless steel & composite braided hose. Locking hose end (2 piece design) Removable & reusable. New low pricing, below retail!
Assembly is easy:
1: Cut hose to desired length. 2: Thread locking end piece onto the outside of the hose. 3: Then thread the fitting side into the locking end. This "pulls" the fitting into the hose creating a tight seal. Use a drop of oil on the threads to insure a smooth fit.
Hose end size: -6 AN female (works with all -6 AN male fittings/adapters)
Type: Straight
Works with hose size: -6
Finish: Hard black anodized
Material: Aircraft grade aluminum
High flow one-way check valves designed to prevent back-flow with minimal pressure drop. Ideal to prevent drain back after the fuel pump is turned off, or when dual pumps are used and both pumps may not run simultaneously.
Fitting Size 1: -10 AN O-ring
Fitting Attachment 1: Female threads
Fitting Size 2: -10 AN O-ring
Fitting Attachment 2: Male threads
Check Valve Material: Billet aluminum
Check Valve Finish: Black anodized
Notes::
- Suitable for use with gasoline fuels only.
- AN O-ring male inlet/female outlet connections allow easy installation into fuel pump outlet port without adding additional lines, hose-ends or fittings.
High flow one-way check valves designed to prevent back-flow with minimal pressure drop. Ideal to prevent drain back after the fuel pump is turned off, or when dual pumps are used and both pumps may not run simultaneously.
Fitting Size 1: -6 AN O-ring
Fitting Attachment 1: Female threads
Fitting Size 2: -6 AN O-ring
Fitting Attachment 2: Male threads
Check Valve Material: Billet aluminum
Check Valve Finish: Black anodized
Notes::
- Suitable for use with gasoline fuels only.
- AN O-ring male inlet/female outlet connections allow easy installation into fuel pump outlet port without adding additional lines, hose-ends or fittings.
Use Aeromotive fuel distribution blocks to direct fuel flow where you want it. These fuel distribution blocks are made from quality materials for a long-lasting product from a name you can trust.
Fuel Distribution Block Shape: Y-block
Inlet Quantity: One
Inlet Attachment: Female threads
Inlet Size: -10 AN O-ring
Outlet Quantity: Two
Outlet Attachment: Female threads
Outlet Size: -8 AN O-ring
Gauge Port: No
Fuel Pressure Gauge Included: No
Fuel Distribution Block Material: Billet aluminum
Fuel Distribution Block Finish: Black anodized
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -6 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -4 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -4 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -6 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -6 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -6 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -8 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -6 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -6 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -8 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -8 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -8 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -10 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -8 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -8 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -10 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -10 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -10 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -12 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -8 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -8 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -12 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -10 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -10 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Aeromotive distribution blocks eliminate the need for additional fittings. The new Aeromotive CNC-machined, billet aluminum Y-Blocks feature A/N Style Male inlets and outlets, which eliminate potential leak paths, fittings, O-Rings and “cost”. Choose from 9 different sizes ranging from AN-04 to AN-12.
Fitting Size 1: -12 AN
Fitting Attachment 1: Male threads
Fitting Size 2: -12 AN
Fitting Attachment 2: Male threads
Fitting Size 3: -12 AN
Fitting Attachment 3: Male threads
Fitting Finish: Black anodized
Fitting Material: Aluminum
Pushlock design with slip on barb. The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all rubber & silicone hose. PushLock hose end (1 piece design) Removable & reusable. New low pricing, below retail!
Note: The PushLock barb design on these hose ends are very good. Normally doesn't need to be used with hose clamps but you can use them for added leak-free security.
Hose end size: -10 AN female (works with all -10 AN male fittings/adapters)
Type: 45 Degree
Works with hose: 5/8" ID Rubber & silicone
Finish: Hard black anodized
Material: Aircraft grade aluminum
Pushlock design with slip on barb. The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all rubber & silicone hose. PushLock hose end (1 piece design) Removable & reusable. New low pricing, below retail!
Note: The PushLock barb design on these hose ends are very good. Normally doesn't need to be used with hose clamps but you can use them for added leak-free security.
Hose end size: -10 AN female (works with all -10 AN male fittings/adapters)
Type: 90 Degree
Works with hose: 5/8" ID Rubber & silicone
Finish: Hard black anodized
Material: Aircraft grade aluminum
Pushlock design with slip on barb. The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all rubber & silicone hose. PushLock hose end (1 piece design) Removable & reusable. New low pricing, below retail!
Note: The PushLock barb design on these hose ends are very good. Normally doesn't need to be used with hose clamps but you can use them for added leak-free security.
Hose end size: -10 AN female (works with all -10 AN male fittings/adapters)
Type: Straight
Works with hose: 5/8" ID Rubber & silicone
Finish: Hard black anodized
Material: Aircraft grade aluminum
Pushlock design with slip on barb. The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all rubber & silicone hose. PushLock hose end (1 piece design) Removable & reusable. New low pricing, below retail!
Note: The PushLock barb design on these hose ends are very good. Normally doesn't need to be used with hose clamps but you can use them for added leak-free security.
Hose end size: -6 AN female (works with all -6 AN male fittings/adapters)
Type: 45 Degree
Works with hose: 3/8" ID Rubber & silicone
Finish: Hard black anodized
Material: Aircraft grade aluminum
Pushlock design with slip on barb. The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all rubber & silicone hose. PushLock hose end (1 piece design) Removable & reusable. New low pricing, below retail!
Note: The PushLock barb design on these hose ends are very good. Normally doesn't need to be used with hose clamps but you can use them for added leak-free security.
Hose end size: -6 AN female (works with all -6 AN male fittings/adapters)
Type: 90 Degree
Works with hose: 3/8" ID Rubber & silicone
Finish: Hard black anodized
Material: Aircraft grade aluminum
Pushlock design with slip on barb. The new black series hose ends puts a cool touch to your high performance lines/hose assemblies. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all rubber & silicone hose. PushLock hose end (1 piece design) Removable & reusable. New low pricing, below retail!
Note: The PushLock barb design on these hose ends are very good. Normally doesn't need to be used with hose clamps but you can use them for added leak-free security.
Hose end size: -6 AN female (works with all -6 AN male fittings/adapters)
Type: Straight
Works with hose: 3/8" ID Rubber & silicone
Finish: Hard black anodized
Material: Aircraft grade aluminum
-10 AN JIC Male TO 1/2" NPT Male Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -10 AN JIC Male To 1/2" NPT Male
Type: Straight
Finish: Hard black anodized
Material: Aircraft grade aluminum
-4 AN JIC Male TO Male Union Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -4 AN JIC Male To Male (works with all -4 AN female hose ends)
Type: Straight
Finish: Hard black anodized
Material: Aircraft grade aluminum
-6 AN JIC Male TO 1/2" NPT Male Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -6 AN JIC Male To 1/2" NPT Male
Type: Straight
Finish: Hard black anodized
Material: Aircraft grade aluminum
-6 AN JIC Male TO Male 1/4" NPT Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -6 AN JIC Male To 1/4" NPT Male
Type: Straight
Finish: Hard black anodized
Material: Aircraft grade aluminum
-6 AN JIC Male TO 1/4" NPT Male, 45 degree Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -6 AN JIC Male To 1/4" NPT Male
Type: 45 degree
Finish: Hard black anodized
Material: Aircraft grade aluminum
-6 AN JIC Male TO Male Union Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -6 AN JIC Male To Male (works with all -6 AN female hose ends)
Type: Straight
Finish: Hard black anodized
Material: Aircraft grade aluminum
-8 AN JIC Male TO 1/2" NPT Male Fitting. Very durable, made from aircraft grade billet aluminum with a hard black anodized finish. For use with oil, water, coolant & fuel. Ideal for high heat & pressure applications. Works with all -6 Hose ends. Removable & reusable. New low pricing, below retail!
Size: -8 AN JIC Male To 1/2" NPT Male
Type: Straight
Finish: Hard black anodized
Material: Aircraft grade aluminum
Black anodized 1/2" NPT plug with allen wrench head. Great for plugging fuel, oil, coolant plugs, or fuel rail end.
$6.50-10 Stainless steel braided hose for use with -10 AN hose ends. Price is per foot & will be sent as one piece (i.e. Order 10 feet, you'll receive a 10 foot length) Very high quality & works with fuel, oil, water, coolant, etc. Outside SS braid & inner fiber reinforced. Suitable for high heat & pressure applications. Not for use with PushLock hose ends. Is not prone to folding/pinching when used in tight bends.
Size: -10 (works with all -10 AN female hose ends. not pushlock)
$9.99-4 Stainless steel braided hose for use with -4 AN hose ends. Price is per foot & will be sent as one piece (i.e. Order 10 feet, you'll receive a 10 foot length) Very high quality & works with fuel, oil, water, coolant, etc. Outside SS braid & inner fiber reinforced. Suitable for high heat & pressure applications. Not for use with PushLock hose ends. Is not prone to folding/pinching when used in tight bends.
Size: -4 (works with all -4 AN female hose ends. not pushlock)
$8.25-6 Stainless steel braided hose for use with -6 AN hose ends. Price is per foot & will be sent as one piece (i.e. Order 10 feet, you'll receive a 10 foot length) Very high quality & works with fuel, oil, water, coolant, etc. Outside SS braid & inner fiber reinforced. Suitable for high heat & pressure applications. Not for use with PushLock hose ends. Is not prone to folding/pinching when used in tight bends.
Size: -6 (works with all -6 AN female hose ends. not pushlock)
$8.75-6 Pushlock hose (3/8" ID) for use with -6 PushLock hose ends, & standard barbs. Price is per foot & will be sent as one piece (i.e. Order 10 feet, you'll receive a 10 foot length) High quality, fiber reinforced has a working pressure up to 300 PSI Works with fuel, oil, water, coolant, etc.
Size: -6 PushLock 3/8" ID (works with all -6 AN PushLock hose ends)
$6.75I can't thank Himni enough for your awesome customer service and technical help. The turbo parts fit perfect. My new favorite turbo shop!
- Chris Y.......
Read More ->
Hands down, best supplier of parts ANYWHERE...PERIOD. Fast service and very knowledgeable staff helped our build and continues to be a resource when......
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.