Categories
- Turbochargers
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- -: Exhaust / Manifolds
- -: Intercooler Kits & Intakes
- CLEARANCE ITEMS
Reviews [more]
Newsletter
English
2.50" Stainless Downpipe - VW 8 valve, T3 Turbo
2.50" stainless steel turbo downpipe for the MK2, MK3 and MK4 cars. Two piece design allows flexibility during installation. Made to work with the cast iron turbo manifold found on our site. Works with T3 or T3/T4 turbos. Has a stainless steel flex section & works with internal wastegates. But can be used with external wastegate with purchase of our T3 discharge flange. Two piece downpipe can be clamped together.
$185.00
2.50" Stainless Downpipe - VW 12v, T3/T4
2.50" stainless steel turbo downpipe designed for MK3 and MK4 cars. Made to work with the cast iron turbo manifold found on our site and T3 or T3/T4 turbo. 2.5" diameter with stainless steel flex section. Can be used with external wastegate with purchase of T3 discharge flange.
$215.00
3.00" Downpipe - VW 12v , A3, VR6 T04 Turbo
3.00" stainless steel turbo downpipe for the A3 cars. Made to work with the cast iron turbo manifold found on our site and T04 on-center turbos. Has a stainless steel flex section. The Downpipe will also work with A2 VR6 turbo conversion.
$215.00
3.00" Race Cat - VW 1.8T Transverse , Golf/Jetta/Beetle
3.00" stainless steel hi-flow cat option to be used with the 3" BIG TURBO downpipe on our site. Replaces the rear Race Section on the downpipe to make it emissions friendly. Includes the rear adapter to reduce to correct diameter. Comes with a o2 sensor mounting point for the second factory oxygen sensor. The hi-flow cat eliminates the engine check-light seen when running the race section.
$186.00
3.00" Stainless Downpipe - VW Transverse K03 1.8T
This full 3.00" stainless steel downpipe was designed to fit all VW & Audi cars with the transverse 1.8T motor. (including VW Golf, Jetta IV, VW New Beetle, Audi TT 180 HP, Seat Leon, Audi A3, and Audi S3)
The kit was designed to bolt directly to the K03 & K04 turbo. No welding or cutting necessary! ... 100% full bolt-on. The downpipe has a high quality stainless steel flex section incorporated and even has installation points for the factory oxygen sensors. The Race section / pipe seen in the picture is included. Hi-Flow catalytic converter is also available & sold separately. Fully TIG welded.
$248.00
Audi A4 / VW Passat 1.8T Longitudinal Exhaust Manifold
High Flow Exhaust manifold with cast tubular design. Made for stock location mounted turbo on longitudinal 1.8T engine found on the 1996 to 2005 Audi A4 and VW Passat. Works with all K03, K04. Includes, all new nuts, bolts, and the new gasket for easy installation.
This manifold out flows the stock unit by over 50%! And is a much more rigged design so it'll last & guaranteed to never crack.
Bolt-on design for the stock turbo that steps up the inner volume & provides faster turbo response, increased HP & torque.
$336.90
Turbonetics - VW 16v Turbo Exhaust Manifold - T3
Turbonetics Cast iron exhaust manifold designed for T3 applications. Will work on any VW 16v motor. Precisely machined for head studs and threaded to: (8mm x 1.25") for easy installation.
Made with external wastegate mounting flange for use with the Tial 38mm wastegate or Turbonetics deltagate. But can be blocked off with our wastegate block-off flange for integral wastegate use / setups.
Works with many turbos with a T3 exhaust housing, including:
T3, T3/T4, T3/T04E, GT28RS, GT2871R, GT2876R, GT2540R, GT3271, GT30R, GT3071R, GT3076R, GT3040R, GT35R, GT3582R, GT3540R, Etc
VW - 8v Turbo Exhaust Manifold - External Wastegate
For use with External wastegates:::
Cast iron, high flow, exhaust manifold designed for T3 or T3/T4 turbo applications. Specially made to fit all VW 8v motors, including crossflow and non-crossflow heads.
The Hi-temp cast iron prevents cracking under severe heat. Precisely machined for head studs and threaded (8mm x 1.25") for easy installation of turbo. Designed for use with external wastegate setups / turbos.
Fits many turbos using a T3 or T4 exhaust housing, including:
T3, T3/T4, T3/T04E, GT28RS, GT2871R, GT2876R, GT2540R, GT3271, GT30R, GT3071R, GT3076R, GT3040R, GT35R, GT3582R, GT3540R, GT40, GT40R
VW - 8v Turbo Exhaust Manifold - Internal Wastegate
For use with Internal wastegates:::
Cast iron, high flow, exhaust manifold designed for T3 or T3/T4 turbo applications. Specially made to fit all VW 8v motors, including crossflow and non-crossflow heads.
The Hi-temp cast iron prevents cracking under severe heat. Precisely machined for head studs and threaded (8mm x 1.25") for easy installation of turbo. Designed for use with integral wastegate setups / turbos.
Fits many turbos using a T3 or T4 exhaust housing, including:
T3, T3/T4, T3/T04E, GT28RS, GT2871R, GT2876R, GT2540R, GT3271, GT30R, GT3071R, GT3076R, GT3040R, GT35R, GT3582R, GT3540R, GT40, GT40R
VW - VR6 12v Turbo Exhaust Manifold
Cast iron VR6 turbp exhaust manifold designed for T3, T3/T4 & T4 turbo applications. Will work for both MK3 and MK4 VR6 cars. Hi-temp cast iron with 1/4" walls prevent cracking under severe heat. Precisely machined for head studs and threaded (8mm x 1.25") for both T3 and T04 inlet bolt patterns for versatility and ease of installation. Cast with external wastegate flangefor use with the Tial 38mm or Turbonetics deltagate. But can be blocked off with our wastegate blockoff flange for integral wastegate use/setups.
Works with many turbos using a T3 or T4 exhaust housing, including:
T3, T3/T4, T3/T04E, GT28RS, GT2871R, GT2876R, GT2540R, GT3271, GT30R, GT3071R, GT3076R, GT3040R, GT35R, GT3582R, GT3540R, GT40, GT40R, etc.
VW / Audi 1.8T - 20v Turbo Manifold - T25 Or T3
For use with any turbo using a T25 / T28 OR T3, T3/T4 exhaust housing. *Select the mounting flange type you want from above.
High Quality, extremely durable, cast iron exhaust manifold designed for use with any T25 / T28 or T3, T3/T4 turbo applications. Will work on any 20v 1.8T motor. Applications include VW Golf/Jetta IV, VW New Beetle, Audi TT, Seat Leon, Audi A3, Audi A4, Passat, and Audi S3.
Made of Hi-temp cast iron with 1/4" walls prevent cracking under severe heat. Precisely machined for head studs and threaded with: (8mm x 1.25" for T25/GT28R/RS or 10mm x 1.5 for T3/GT30R/GT35R) for either T25 or T3 inlet bolt patterns.
Made with external wastegate mounting flange for use with the TiAL 38mm wastegate or Turbonetics deltagate. Can be blocked off with one of our blockoff flanges for integral wastegate setups / use.
For use with any turbo using a T25 / T28 OR T3, T3/T4 exhaust housing, such as:
T25, T28, T3, T3/T4, T3/T04E, GT25R, GT28R, GT28RS, GT2871R, GT2876R, GT2540R, GT3271, GT30R, GT3071R, GT3076R, GT3040R, GT35R, GT3582R, GT3540R, Etc.
VW Downpipe Flange - K03 / K04 Turbo FWD 1.8T
CNC machined mild steel downpipe flange for the stock K03 & K04 turbo on the FWD VW 1.8T Golf, Jetta & Beetle. Great for custom downpipes.
$24.00
VW Downpipe Flange - FWD 2.0L FSI
CNC machined mild steel downpipe flange for the stock turbo on the VW/Audi FWD 2.0L FSI Golf, Jetta & A3. Great for custom downpipes.
$36.00Bestsellers
Customer Testimonials
You guys are an example to every Shop! MANY THANKS for all your help!
- Kenneth B of Mosta, Malta...
Read More ->
Genuine Brands
I ordered a Tial blow off valve and it was at my door in only 3 days! The serial number checked out with TiAl as authentic. No one else had the color......
Read More ->
