Categories
- Turbochargers
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- -Brushed Aluminum Pipes/Bends
- -Polished Aluminum Pipes/Bends
- -Stainless Steel Pipes/Bends
- -Stainless Steel Thick Wall Pipes
- -Modular Flanged Pipes/Tubes
- -Stainless Steel Flex Bellows
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
EnglishStainless Steel Thick Wall Pipes
1.00" 45 Degree Stainless Steel Thick Wall Elbow/Pipe
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the ACTUAL inner & outer diameter of the pipe is different. This is how pipe (rather than tube) is measured. Below are the actual sizes. Insure you are buying the correct size before adding this item to you cart.
1.00" diameter 45 degree bend, thick wall stainless steel pipe/ elbow. These tight radius T304 / 304 / 304L SS pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. The smooth unrestricted bending allows for maximum exhaust flow & each end of the pipe feature chamfered edges to insure proper penetration, seamless while butt welding. Used for engine flange to turbo flange runners, wastegate runners & dump tubes & even downpipes & up pipes.
Detailed Specifications:
-----------------------
Actual O.D. - 1.31"
Actual I.D. - 1.09"
Centerline Radius - 7/8"
Wall Thickness 1/8" (3mm)
Elbow degree: 45
Material: 304 Stainless Steel
Leg: Short
1.25" 45 Degree Stainless Steel Thick Wall Elbow/Pipe
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the ACTUAL inner & outer diameter of the pipe is different. This is how pipe (rather than tube) is measured. Below are the actual sizes. Insure you are buying the correct size before adding this item to you cart.
1.25" diameter 45 degree bend, thick wall stainless steel pipe/ elbow. These tight radius T304 / 304 / 304L SS pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. The smooth unrestricted bending allows for maximum exhaust flow & each end of the pipe feature chamfered edges to insure proper penetration, seamless while butt welding. Used for engine flange to turbo flange runners, wastegate runners & dump tubes & even downpipes & up pipes.
Detailed Specifications:
-----------------------
Actual O.D. - 1.66"
Actual I.D. - 1.44"
Centerline Radius - 1"
Wall Thickness 1/8" (3mm)
Elbow degree: 45
Material: 304 Stainless Steel
Leg: Short
1.50" 45 Degree Stainless Steel Thick Wall Elbow/Pipe
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the ACTUAL inner & outer diameter of the pipe is different. This is how pipe (rather than tube) is measured. Below are the actual sizes. Insure you are buying the correct size before adding this item to you cart.
1.50" diameter 45 degree bend, thick wall stainless steel pipe/ elbow. These tight radius T304 / 304 / 304L SS pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. The smooth unrestricted bending allows for maximum exhaust flow & each end of the pipe feature chamfered edges to insure proper penetration, seamless while butt welding. Used for engine flange to turbo flange runners, wastegate runners & dump tubes & even downpipes & up pipes.
Detailed Specifications:
-----------------------
Actual O.D. - 1.90"
Actual I.D. - 1.68"
Centerline Radius - 1 1/8"
Wall Thickness 1/8" (3mm)
Elbow degree: 45
Material: 304 Stainless Steel
Leg: Short
2.00" 45 Degree Stainless Steel Thick Wall Elbow/Pipe
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the ACTUAL inner & outer diameter of the pipe is different. This is how pipe (rather than tube) is measured. Below are the actual sizes. Insure you are buying the correct size before adding this item to you cart.
2.00" diameter 45 degree bend, thick wall stainless steel pipe/ elbow. These tight radius T304 / 304 / 304L SS pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. The smooth unrestricted bending allows for maximum exhaust flow & each end of the pipe feature chamfered edges to insure proper penetration, seamless while butt welding. Used for engine flange to turbo flange runners, wastegate runners & dump tubes & even downpipes & up pipes.
Detailed Specifications:
-----------------------
Actual O.D. - 2.37"
Actual I.D. - 2.15"
Centerline Radius - 1 3/8"
Wall Thickness 1/8" (3mm)
Elbow degree: 45
Material: 304 Stainless Steel
Leg: Short
2.50" 45 Degree Stainless Steel Thick Wall Elbow/Pipe
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the ACTUAL inner & outer diameter of the pipe is different. This is how pipe (rather than tube) is measured. Below are the actual sizes. Insure you are buying the correct size before adding this item to you cart.
2.50" diameter 45 degree bend, thick wall stainless steel pipe/ elbow. These tight radius T304 / 304 / 304L SS pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. The smooth unrestricted bending allows for maximum exhaust flow & each end of the pipe feature chamfered edges to insure proper penetration, seamless while butt welding. Used for engine flange to turbo flange runners, wastegate runners & dump tubes & even downpipes & up pipes.
Detailed Specifications:
-----------------------
Actual O.D. - 2.87"
Actual I.D. - 2.63"
Centerline Radius - 1.75"
Wall Thickness 1/8" (3mm)
Elbow degree: 45
Material: 304 Stainless Steel
Leg: Short
1.00" 90 Degree Stainless Steel Thick Wall Elbow/Pipe
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the ACTUAL inner & outer diameter of the pipe is different. This is how pipe (rather than tube) is measured. Below are the actual sizes. Insure you are buying the correct size before adding this item to you cart.
1.00" diameter 90 degree bend, thick wall stainless steel pipe/ elbow. These tight radius T304 / 304 / 304L SS pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. The smooth unrestricted bending allows for maximum exhaust flow & each end of the pipe feature chamfered edges to insure proper penetration, seamless while butt welding. Used for engine flange to turbo flange runners, wastegate runners & dump tubes & even downpipes & up pipes.
Detailed Specifications:
-----------------------
Actual O.D. - 1.31"
Actual I.D. - 1.09"
Height 1.50" (measured from I.D. center to center)
Wall Thickness 1/8" (3mm)
Elbow degree: 90
Material: 304 Stainless Steel
1.25" 90 Degree Stainless Steel Thick Wall Elbow/Pipe
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the ACTUAL inner & outer diameter of the pipe is different. This is how pipe (rather than tube) is measured. Below are the actual sizes. Insure you are buying the correct size before adding this item to you cart.
1.25" diameter 90 degree bend, thick wall stainless steel pipe/ elbow. These tight radius T304 / 304 / 304L SS pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. The smooth unrestricted bending allows for maximum exhaust flow & each end of the pipe feature chamfered edges to insure proper penetration, seamless while butt welding. Used for engine flange to turbo flange runners, wastegate runners & dump tubes & even downpipes & up pipes.
Detailed Specifications:
-----------------------
Actual O.D. - 1.66"
Actual I.D. - 1.44"
Height 1 7/8" (measured from I.D. center to center)
Wall Thickness 1/8" (3mm)
Elbow degree: 90
Material: 304 Stainless Steel
1.50" 90 Degree Stainless Steel Thick Wall Elbow/Pipe
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the ACTUAL inner & outer diameter of the pipe is different. This is how pipe (rather than tube) is measured. Below are the actual sizes. Insure you are buying the correct size before adding this item to you cart.
1.50" diameter 90 degree bend, thick wall stainless steel pipe/ elbow. These tight radius T304 / 304 / 304L SS pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. The smooth unrestricted bending allows for maximum exhaust flow & each end of the pipe feature chamfered edges to insure proper penetration, seamless while butt welding. Used for engine flange to turbo flange runners, wastegate runners & dump tubes & even downpipes & up pipes.
Detailed Specifications:
-----------------------
Actual O.D. - 1.90"
Actual I.D. - 1.68"
Height 2.25" (measured from I.D. center to center)
Wall Thickness 1/8" (3mm)
Elbow degree: 90
Material: 304 Stainless Steel
2.00" 90 Degree Stainless Steel Thick Wall Elbow/Pipe
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the ACTUAL inner & outer diameter of the pipe is different. This is how pipe (rather than tube) is measured. Below are the actual sizes. Insure you are buying the correct size before adding this item to you cart.
2.00" diameter 90 degree bend, thick wall stainless steel pipe/ elbow. These tight radius T304 / 304 / 304L SS pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. The smooth unrestricted bending allows for maximum exhaust flow & each end of the pipe feature chamfered edges to insure proper penetration, seamless while butt welding. Used for engine flange to turbo flange runners, wastegate runners & dump tubes & even downpipes & up pipes.
Detailed Specifications:
-----------------------
Actual O.D. - 2.37"
Actual I.D. - 2.15"
Height 3.00" (measured from I.D. center to center)
Wall Thickness 1/8" (3mm)
Elbow degree: 90
Material: 304 Stainless Steel
2.50" 90 Degree Stainless Steel Thick Wall Elbow/Pipe
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the ACTUAL inner & outer diameter of the pipe is different. This is how pipe (rather than tube) is measured. Below are the actual sizes. Insure you are buying the correct size before adding this item to you cart.
2.50" diameter 90 degree bend, thick wall stainless steel pipe/ elbow. These tight radius T304 / 304 / 304L SS pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. The smooth unrestricted bending allows for maximum exhaust flow & each end of the pipe feature chamfered edges to insure proper penetration, seamless while butt welding. Used for engine flange to turbo flange runners, wastegate runners & dump tubes & even downpipes & up pipes.
Detailed Specifications:
-----------------------
Actual O.D. - 2.87"
Actual I.D. - 2.63"
Height 3.75" (measured from I.D. center to center)
Wall Thickness 1/8" (3mm)
Elbow degree: 90
Material: 304 Stainless Steel
6.00" 90 Degree Stainless Steel Thick Wall Elbow/Pipe
6.00" diameter 90 degree bend, thick wall stainless steel pipe/ elbow. These tight radius T304 / 304 / 304L SS pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, extra think wall makes them ideal for use in high heat applications & holding heavy turbos. The smooth unrestricted bending allows for maximum exhaust flow & each end of the pipe feature chamfered edges to insure proper penetration, seamless while butt welding. Used for engine flange to turbo flange runners, wastegate runners & dump tubes & even downpipes & up pipes.
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the actual inner & outer diameter of the pipe is actually different. This is how pipe (rather than tube) is measured. Below are the actual sizes.
Detailed Specifications:
-----------------------
Actual O.D. - 6.62"
Actual I.D. - 6.35"
Height 9.00" (measured from I.D. center to center)
Wall Thickness .134"
Elbow degree: 90
Material: 304 Stainless Steel
1.00" Straight Stainless Steel Thick Wall Pipe
1.00" diameter straight length thick wall stainless steel pipe. Made to mate seamlessly to our 45 & 90 elbows of the same size diameter. Available in 12" (1 foot) & 36" (3 foot) long lengths. (select from menu)
These T304 / 304 / 304L Stainless Steel pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. Used for engine flange to turbo flange runners, wastegate runners, dump tubes & even downpipes & up pipes.
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the actual inner & outer diameter of the pipe is actually different. This is how pipe (rather than tube) is measured. Below are the actual sizes.
Detailed Specifications:
-----------------------
Actual O.D. - 1.31"
Actual I.D. - 1.09"
Wall Thickness 1/8" (3mm)
Material: 304 Stainless Steel
1.25" Straight Stainless Steel Thick Wall Pipe
1.25" diameter straight length thick wall stainless steel pipe. Made to mate seamlessly to our 45 & 90 elbows of the same size diameter. Available in 12" (1 foot) & 36" (3 foot) long lengths. (select from menu)
These T304 / 304 / 304L Stainless Steel pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. Used for engine flange to turbo flange runners, wastegate runners, dump tubes & even downpipes & up pipes.
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the actual inner & outer diameter of the pipe is actually different. This is how pipe (rather than tube) is measured. Below are the actual sizes.
Detailed Specifications:
-----------------------
Actual O.D. - 1.66"
Actual I.D. - 1.44"
Wall Thickness 1/8" (3mm)
Material: 304 Stainless Steel
1.50" Straight Stainless Steel Thick Wall Pipe
1.50" diameter straight length thick wall stainless steel pipe. Made to mate seamlessly to our 45 & 90 elbows of the same size diameter. Available in 12" (1 foot) & 36" (3 foot) long lengths. (select from menu)
These T304 / 304 / 304L Stainless Steel pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. Used for engine flange to turbo flange runners, wastegate runners, dump tubes & even downpipes & up pipes.
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the actual inner & outer diameter of the pipe is actually different. This is how pipe (rather than tube) is measured. Below are the actual sizes.
Detailed Specifications:
-----------------------
Actual O.D. - 1.90"
Actual I.D. - 1.68"
Wall Thickness 1/8" (3mm)
Material: 304 Stainless Steel
2.00" Straight Stainless Steel Thick Wall Pipe
2.00" diameter straight length thick wall stainless steel pipe. Made to mate seamlessly to our 45 & 90 elbows of the same size diameter. Available in 12" (1 foot) & 36" (3 foot) long lengths. (select from menu)
These T304 / 304 / 304L Stainless Steel pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. Used for engine flange to turbo flange runners, wastegate runners, dump tubes & even downpipes & up pipes.
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the actual inner & outer diameter of the pipe is actually different. This is how pipe (rather than tube) is measured. Below are the actual sizes.
Detailed Specifications:
-----------------------
Actual O.D. - 2.37"
Actual I.D. - 2.15"
Wall Thickness 1/8" (3mm)
Material: 304 Stainless Steel
2.50" Straight Stainless Steel Thick Wall Pipe
2.50" diameter straight length thick wall stainless steel pipe. Made to mate seamlessly to our 45 & 90 elbows of the same size diameter. Available in 12" (1 foot) & 36" (3 foot) long lengths. (select from menu)
These T304 / 304 / 304L Stainless Steel pipes are most commonly used in the performance after market to build runners for exhaust headers & turbo charger manifolds. They are also perfect for T25, T3, T4 & T6 merge collectors. Very durable, 1/8" (3mm) extra think wall makes them ideal for use in high heat applications & holding heavy turbos. Used for engine flange to turbo flange runners, wastegate runners, dump tubes & even downpipes & up pipes.
Though normal pipe sizes are listed in standard sizes (2", 2.50", 3" etc) the actual inner & outer diameter of the pipe is actually different. This is how pipe (rather than tube) is measured. Below are the actual sizes.
Detailed Specifications:
-----------------------
Actual O.D. - 2.87"
Actual I.D. - 2.63"
Wall Thickness 1/8" (3mm)
Material: 304 Stainless Steel
Bestsellers
Customer Testimonials
I called and placed my order over the phone. I had a bunch of questions and the lady was kind and very helpful. She made sure I got all the right......
Read More ->
Fast From The US
very fast shipping for international!!!! thank you & i will be back for more soon.
-Michael E. Rattelsdorf, Germany...
Read More ->
