Home View Cart Register

HR IS SHIPPING EVERYDAY DURING THIS NEW COVID-19 WORLD ORDER

: Turbo Oil & Water Fittings

: Turbo Oil & Water Fittings


#1
GT Oil Feed Fitting w/ Restrictor : -4 an GT BB Turbos

GT Oil Feed Fitting w/ Restrictor : -4 an GT BB Turbos

Custom machined Oil inlet / feed fitting for Garrett GT Ball Bearing Turbos. Screws right into the turbos listed below & works with any -4 AN line. Has a built-in oil...

Our price: $14.95    more info....
#2
Oil Feed Fitting w/ Restrictor - T & Big GT Turbos .065

Oil Feed Fitting w/ Restrictor - T & Big GT Turbos .065

Oil inlet restrictor for T series turbochargers. Installed at the oil inlet on turbo to reduce max oil pressure going into the turbo to prevent turbo seal damage due to...

Our price: $14.90    more info....
#3
EVO 8 Turbo Oil Feed Fitting/ Adapter - For -4 Line

EVO 8 Turbo Oil Feed Fitting/ Adapter - For -4 Line

EVO 8 Oil Feed adapter. Cyl Head to -4 Male AN Flair. Fits directly to the original oil feed source on the cylinder head & allows for the use of any -4 an oil line. ....

Our price: $17.40    more info....
#4
VW 1.8T/2.0T Oil Feed Fitting Adapter, Stock Port to -4 AN

VW 1.8T/2.0T Oil Feed Fitting Adapter, Stock Port to -4 AN

1.8T oil feed adapter simplifies installation of aftermarket oil lines. Adapts to the stock oil feed line source at the oil filter housing to -4 Male AN Flair. Allows...

Our price: $15.29    more info....
#5
GT TURBO SS Oil feed Line Kit - Mazda RX-7- (GT25R-GT35R)

GT TURBO SS Oil feed Line Kit - Mazda RX-7- (GT25R-GT35R)

Himni Racing SS oil feed line kit for use with Garrett 'GT BALL BEARING SERIES' Turbochargers only. (GT25R-GT35R) Other kits available for the following turbo...

Our price: $64.90    more info....
#6
Water/Coolant Line Fitting Kit FOR GT25R/GT28R

Water/Coolant Line Fitting Kit FOR GT25R/GT28R

Banjo fitting kit for coolant / water connections on Garrett GT25R/GT28R Turbochargers. Works with standard 3/8" hose. The fitting screws to the turbo & the hose simply...

Our price: $16.50    more info....
#7
Water / Coolant Line Fitting Kit FOR GT28RS/GT2871R

Water / Coolant Line Fitting Kit FOR GT28RS/GT2871R

Banjo fitting kit for coolant / water connections on Garrett GT28RS & GT2871R Turbochargers. Works with standard 3/8" hose. The fitting screws to the turbo & the hose...

Our price: $16.50    more info....
#8
Water / Coolant Line Fitting Kit FOR GT2876R/GT3071R

Water / Coolant Line Fitting Kit FOR GT2876R/GT3071R

Banjo fitting kit for coolant / water connections on Garrett GT2876R & GT3071R Turbochargers. Works with standard 3/8" hose. The fitting screws to the turbo & the hose...

Our price: $16.50    more info....
#9
Water / Coolant Line Fitting Kit FOR GT30R/GT3076R

Water / Coolant Line Fitting Kit FOR GT30R/GT3076R

Banjo fitting kit for coolant / water connections on Garrett GT30R. GT3076R Turbochargers. Works with standard 3/8" hose. The fitting screws to the turbo & the hose...

Our price: $16.50    more info....
#10
Water / Coolant Line Fitting Kit FOR GT3082R/GT3040R

Water / Coolant Line Fitting Kit FOR GT3082R/GT3040R

Banjo fitting kit for coolant / water connections on Garrett GT3082R, GT3040R Turbocharger. Works with standard 3/8" hose. The fitting screws to the turbo & the hose...

Our price: $16.50    more info....
#11
Water / Coolant Line Fitting Kit FOR GT3071R

Water / Coolant Line Fitting Kit FOR GT3071R

Banjo fitting kit for coolant / water connections on Garrett GT3071R Turbocharger. Works with standard 3/8" hose. The fitting screws to the turbo & the hose simply slips...

Our price: $16.50    more info....
#12
Water / Coolant Line Fitting Kit FOR GT3076R-WG

Water / Coolant Line Fitting Kit FOR GT3076R-WG

Banjo fitting kit for coolant / water connections on Garrett GT3076R-WG Turbocharger. Works with standard 3/8" hose. The fitting screws to the turbo & the hose simply...

Our price: $16.50    more info....
#13
Water / Coolant Line Fitting Kit FOR GT3040R

Water / Coolant Line Fitting Kit FOR GT3040R

Banjo fitting kit for coolant / water connections on Garrett GT25R Turbocharger. Works with standard 3/8" hose. The fitting screws to the turbo & the hose simply slips...

Our price: $16.50    more info....
#14
Water / Coolant Line Fitting Kit FOR GT35R/GT3582R

Water / Coolant Line Fitting Kit FOR GT35R/GT3582R

Banjo fitting kit for coolant / water connections on Garrett GT35R, GT3582R Turbocharger. Works with standard 3/8" hose. The fitting screws to the turbo & the hose...

Our price: $16.50    more info....
#15
14mm Banjo To Female 1/4" Fitting Kit - Water / Oil / Fuel

14mm Banjo To Female 1/4" Fitting Kit - Water / Oil / Fuel

14mm Machined aluminum Banjo fitting kit. Great for turbo water & other connections. 14mm banjo bolt to 1/4" NPT - Very flexible when used with 1/4" NPT to -6 AN...

Our price: $27.00    more info....
#16
14mm Banjo Fitting 3/8" Barb -Oil/Water/Fuel

14mm Banjo Fitting 3/8" Barb -Oil/Water/Fuel

Banjo fitting kit is good for use with water, oil & fuel. Works with standard 3/8" hose. The fitting screws to the turbo & the hose simply slips on to the barb, then...

Our price: $16.50    more info....
#17
-3 AN To 1/8" NPT 45 Degree Fitting

-3 AN To 1/8" NPT 45 Degree Fitting

-3 AN To 1/8" NPT 45 Degree Fitting. " Male to Male" Suitable for turbo oil feed lines, water & fuel.

Our price: $6.80    more info....
#18
-3 AN To 1/8" NPT Straight Fitting

-3 AN To 1/8" NPT Straight Fitting

-3 AN To 1/8" NPT Straight Fitting " Male to Male" Great for turbo oil feed lines, water & fuel.

Our price: $6.80    more info....
#19
-4 AN To 1/8" NPT 45 Degree Fitting

-4 AN To 1/8" NPT 45 Degree Fitting

-4 AN To 1/8" NPT 45 Degree Fitting. " Male to Male" Suitable for turbo oil feed lines, water & fuel.

Our price: $8.25    more info....
#20
-4 AN To 1/8" NPT 90 Degree Fitting

-4 AN To 1/8" NPT 90 Degree Fitting

-4 AN To 1/8" NPT 90 Degree Fitting " Male to Male" Great for turbo oil feed lines, water & fuel.

Our price: $10.50    more info....
#21
-4 AN To 1/8" NPT Straight Fitting

-4 AN To 1/8" NPT Straight Fitting

-4 AN To 1/8" NPT Straight Fitting " Male to Male" Great for turbo oil feed lines, water & fuel.

Our price: $8.40    more info....
#22
Oil Drain / Return Fitting (1/2" NPT 45 Degree to 5/8" Barb)

Oil Drain / Return Fitting (1/2" NPT 45 Degree to 5/8" Barb)

Turbo Oil return / drain fitting. Fits both our GT series & T series turbo oil return flanges with 1/2" female NPT threads. Threaded to a male 1/2" NPT with a 45 degree...

Our price: $19.99    more info....
#23
Oil Drain / Return Fitting (1/2" NPT to 5/8" Barb)

Oil Drain / Return Fitting (1/2" NPT to 5/8" Barb)

Turbo Oil return / drain fitting. Fits both our GT series & T series turbo oil return flanges. Threaded to a male 1/2" NPT with a Straight 5/8" hose barb. Works with any...

Our price: $8.96    more info....
#24
-10 AN To 1/2" NPT Straight Fitting

-10 AN To 1/2" NPT Straight Fitting

-10 AN To 1/2" NPT Straight Fitting " Male to Male" Suitable for oil , water & fuel. Works great with our turbo oil return / drain flanges & lines.

Our price: $7.00    more info....
#25
-10 AN To 1/2" NPT 45 Degree Oil Drain Fitting

-10 AN To 1/2" NPT 45 Degree Oil Drain Fitting

-10 AN To 1/2" NPT 45 Degree Fitting. " Male to Male" Suitable for oil, water & fuel. Works great with our turbo oil return flanges & lines.

Our price: $10.90    more info....
#26
-10 AN To 1/2" NPT 90 Degree Fitting

-10 AN To 1/2" NPT 90 Degree Fitting

-10 AN To 1/2" NPT 90 Degree Fitting " Male to Male" Suitable for oil, water & fuel. Wroks great with our turbo oil drain flanges & lines.

Our price: $11.40    more info....
#27
14mm TO -6 AN Metric Fitting - Water/ Oil/Fuel

14mm TO -6 AN Metric Fitting - Water/ Oil/Fuel

Metric fitting:: 14mm male (1.5 pitch) to male 6 AN Flare, with sealing Washer. Provides easy way to connect to stainless Steel braided type lines with #6 AN hose ends....

Our price: $15.90    more info....
#28
16mm TO -6 AN Metric Fitting - Water/Oil/Fuel

16mm TO -6 AN Metric Fitting - Water/Oil/Fuel

Metric fitting:: 16mm male (1.5 pitch) to male 6 AN Flare, with sealing Washer. Provides easy way to connect to stainless Steel braided type lines with #6 AN hose ends....

Our price: $15.90    more info....
#29
18mm TO -6 AN Metric Fitting - Water GT40R / GT42R

18mm TO -6 AN Metric Fitting - Water GT40R / GT42R

Metric fitting:: 18mm male (1.5 pitch) to male 6 AN Flare, with sealing Washer. Provides easy way to connect to stainless Steel braided type lines with #6 AN hose ends....

Our price: $15.90    more info....

  
bottom
Copyright © 2005-2022. All rights reserved www.himniracing.com
Terms of use