12 - 14 psi Internal Wastegate turbo Actuator. High quality & reliable for real performance. Universal fitment & also works with many of the Garrett GT turbos with a larger compressor housing with internal wastegate exhaust housing configuration. Including:
The GT28RS, GT2871R, GT2876R, GT2540R, GT3071R-WG, GT3071R, GT3076R-WG, GT30R, GT3076R, GT3082R, GT35R, GT3582R, etc.
Comes with a bent / off-set & adjustable rod. 2 bolt mounting works with most actuator mounting brackets. Great for any turbo with a large compressor housing. Fits our universal mounting bracket part # WGT-009
$86.9012 - 14 psi Internal Wastegate turbo Actuator. High quality & reliable for real performance. Universal fitment with integrated 2 bolt mounting bracket. Commonly used as an high pressure upgrade for the GT28R turbo but fits other turbos as well.
Has a off-set rod & adjustable rod end. 2 bolt mounting works with most smaller turbos.
$98.9012 - 14 psi Internal Wastegate turbo Actuator with adjustable straight arm. High quality & reliable for real performance. Universal fitment, angle bracket to tuck behind compressor housing.
$79.90Internal Wastegate actuator. High pressure, large diaphragm, 18 PSI unit. Fits most 2 bolt internal wastegate brackets. Great for increasing your boost level without the use of a boost controller. Universal fitment works with most turbos.
$117.0022 psi Internal Wastegate turbo Actuator. High quality & reliable for real performance. Universal fitment & also works with many of the Garrett GT turbos with a larger compressor housing with internal wastegate exhaust housing configuration.
Works with the following turbos & more:
GT25, GT25R, GT2554R, GT28, GT28R, GT2860R, GT2660RS, GT2871R, GTX2860R, GTX2863R, GTX2867R, GT2876R, GT3071, GT3071R-WG, GT3076R-WG, GT3071R, GTX3071R, GT30, GT30R, GTX3067R, GT3076R, GTX3076R, GT3040R, GT3082R, GT35, GT35R, GTX35R, GTX3576R, GT3582R, GTX3582R, etc.
Comes with a bent / off-set & adjustable rod. 2 bolt mounting works with most actuator mounting brackets. Great for any turbo with a large compressor housing. Fits our universal mounting bracket part # E12T009
$89.9025-30 psi Internal Wastegate turbo actuator head with threaded rod (M6 x 1.00) and no rod end. High quality & reliable for real performance. Universal fitment for custom high pressure applications. Standard 2 bolt mounting fits most baskets. Uses AN/JIC pressure fitting to hold secure under high pressure.
Works with rod ends found on our site.
$72.00Garrett 6 psi Internal Wastegate turbo actuator for T04E class turbo compressor housings/turbocharhgers. High quality & reliable for real performance. Straight arm, bolt on, full kit with mounting bracket.
$123.95Internal Wastegate Actuator. Universal, 6 PSI with Straight Arm & 2 bolt mounting. Also for use with GT28RS on transversely mounted turbo SR20DET & Mazdaspeed Protege applications.
$82.506 - 7 psi Internal Wastegate turbo Actuator. High quality & reliable for real performance. Universal fitment & also works with many of the Garrett GT turbos with a larger compressor housing with internal wastegate exhaust housing configuration. Including:
The GT28RS, GT2871R, GT2876R, GT2540R, GT3071R-WG, GT3071R, GT3076R-WG, GT30R, GT3076R, GT3082R, GT35R, GT3582R, etc.
Comes with a bent / off-set & adjustable rod. 2 bolt mounting works with most actuator mounting brackets. Great for any turbo with a large compressor housing. Fits our universal mounting bracket part # WGT-009
$84.906 - 7 psi Internal Wastegate turbo Actuator with integrated 2 hole mounting bracket. This is the same actuator that comes stock on the Garrett GT28R turbos & will fit other units of comparable size. Replacement
$76.99Internal Wastegate Actuator Extension Rod Kit. Extends the actuator's rod/arm for more length.
Includes::: (1) 2" Long threaded rod, (1) female threaded coupler & (2) jam nuts.
$11.99Internal Wastegate Actuator rod end with large hold eyelet. Fit T3 5 bolt to 3 bolt internal wastegate swing valves.
$12.00Straight rod vacuum actuated internal wastegate actuator. Common replacement for applications such as OE VW Turbo Diesel turbos. Stock replacement unit.
$77.5011 psi Internal Wastegate turbo Actuator with straight arm. High quality & reliable for real performance. Universal 2 bolt/hole fitment works with many mid sized turbos Including:
GT30R, GT3076R, GT3082R, GT35R, GT3582R, etc.
Fits our universal mounting bracket part # WGT-009
$121.95Internal Wastegate Bracket. Fits most T25, T28, T3, T4 & GT series style compressor housings. CNC machined & designed to make it truly universal. Allows virtually any standard 2 bolt actuator to be used with it. Made of aluminum.
Fits:
T25, T28, T3, T3/T4, T4, T04, 60-1, 62-1, GT28R, GT28RS, GT2871R, GT2876R, GT2540R, GT30R, GT3071R, GT3071R-WG, GT3076R, GT35R, GT35/40R & more.
This specially made, wastegate actuator mounting bracket is made to be used on the SR20 engine to allow the GT25R style actuator to be mounted on the GT28RS or GT2871R turbo. For use with our straight arm, 6 psi actuator.
$35.90Garrett Internal Wastegate actuator mounting Bracket for T04B turbos / & T04B compressor housings. Works with most actuators. Universal Fit.
$14.95Garrett Internal Wastegate actuator mounting Bracket for T3 turbos & T3 compressor housings. Fit most actuators.
$10.99Internal wastegate housing w/ Swingvalve. Fits standard T3 5 Bolt discharge (ford style) turbine housings & converts it to a unique 4 bolt downpipe discharge pattern. Note: The 4 Bolt pattern is not the same as the our 2.5" & 3" 4 bolt downpipe flanges.
$78.50Complete internal wastegate assembly as shown in the picture above. It includes the internal wastegate housing with pre-assembled swing valve, adjustable , and a machined mounting bracket for the actuator.
Made in the USA & Fits all Turbochargers With T3 5-bolt (ford style) Turbine Housing. Your pick of 7 psi, 14 psi or 22 psi actuator.
Fits turbos such as:
T3, T3/T4, GT28RS, GT2871R, GT30R, GT3071R, GT3076R, GT25/40R, GT35R, etc.
This internal wastegate bolts to the turbo using the 5 mounting holes. The down pipe is attached to the wastegate assembly with the 3 mounting holes on the other side. Boost pressure is easily adjustable via the adjustable arm on the actuator. The included actuator mounting bracket allows for fitment to most turbos.
Comes Complete with:
---T3 5-bolt internal wastegate housing & Swing Valve
---Boost Adjustable actuator
---Mounting Bracket
3-bolt downpipe flanges to fit this internal wastegate are also available on our site.
$221.00The ultimate internal wastegate T3 5 bolt swingvalve. Fits T3 turbo exhaust housings with standard 5_bolt exit (ford style). Converts from the 5_bolt exit to a full 3" v-band exit allowing the use of 3" v-band downpipe. Extremely high flow design for big HP & works great with European Cosworth engines that require high flow. Overall thickness from face of flange to face of flange is 2-5/16" (59mm).
Fits many turbos with T3 5-Bolt exhaust housings, including:
T3, T3/T4, T3/T04E, GT25/40R, GT25, GT25R, GT2554R, GT2854R, GT28RS, GT2871R, GTX2860R, GTX2863R, GTX2867R, GT3071R, GTX3071R, GT30R, GT3076R, GTX3076R, GT30/40R, GT35R, GT3582R, GTX3582R & more.
Note: For use with T3 5 Bolt turbine housings only. Not to be confused with T25 5 bolt internal wastegate turbine/exhaust housings. Available in both mild & stainless steel. Made in the USA.
$147.90TurboSmart's Mazdaspeed Internal Wastegate Actuator (IWG) provides better turbo response and greater sensitivity when managing boost pressures. Designed as a direct bolt-on replacement for the factory part for for Mazdaspeed 3, 6, CX-7. The Mazdaspeed IWG is easy to install and requires no special tools or fabrication. It can’t get any easier.
TurboSmart Mazdaspeed Internal Wastegate Actuator features Silicon diaphragm with Nomex reinforcement to withstand high temperatures. Their High grade billet aluminum construction and stainless steel rods and connecting clevis for corrosion resistance in any harsh condition. Locking Collar design cap allows for quick spring changes.
Note::
- Applications for Mazdaspeed 3, 6, CX-7.
Turbosmart Universal Internal Wastegate Actuator is suitable for most factory or aftermarket turbos with an internal wastegate. It's ideal for custom applications requiring only small modifications to the bracket or the clevis. Turbosmart has developed these internal wastegate actuators to provide better turbo response and sensitivity, while managing boost pressure. They are packed with features that make them more convenient and reliable.
Their Nomex-reinforced silicone diaphragm can withstand the high temperatures associated with turbochargers without fear of failure. Their high-grade billet aluminum construction is strong and lightweight, while their stainless steel rod and clevis prevent corrosion under harsh elements.
To top off these great little packages, Turbosmart designed a locking collar that allows for quick spring changes. Combine these internal wastegate actuators with Turbosmart's boost controller to really fine-tune your car's potential.
- Wastegate Actuator Material: Billet Aluminum
- Wategate Actuator Finish: Black anodized
- Notes: 10 psi/0.7 bar. 150mm actuator rod length.
Turbosmart Universal Internal Wastegate Actuator is suitable for most factory or aftermarket turbos with an internal wastegate. It's ideal for custom applications requiring only small modifications to the bracket or the clevis. Turbosmart has developed these internal wastegate actuators to provide better turbo response and sensitivity, while managing boost pressure. They are packed with features that make them more convenient and reliable.
Their Nomex-reinforced silicone diaphragm can withstand the high temperatures associated with turbochargers without fear of failure. Their high-grade billet aluminum construction is strong and lightweight, while their stainless steel rod and clevis prevent corrosion under harsh elements.
To top off these great little packages, Turbosmart designed a locking collar that allows for quick spring changes. Combine these internal wastegate actuators with Turbosmart's boost controller to really fine-tune your car's potential.
- Wastegate Actuator Material: Billet Aluminum
- Wategate Actuator Finish: Black anodized
- Notes: 14 psi/0.1 bar. 150mm actuator rod length.
Internal wastegate Swingvalve for larger 5 bolt Mercedes style bolt pattern. Ultimate internal wastegate swingvalve with 3" V-Band on downpipe side. Bolts up to T3 5-bolt turbine housing with larger (Mercedes style) bolt pattern. Super high flowing design for high HP efficiency applications utilizing an internal wastegate. Works with our 3.00" V-band flanges & clamps.
$147.00Made in the USA, UIWG style turbo discharge flange with integrated swing valve & ovalized opening. Fits Standard T3 5-bolt Ford type turbo exhaust housings commonly found on many turbo's including T3/T4 units. Flange is just over 1/2" think & works well with our UIWG style transition found in the recommended items on this page.
$90.00This flange bolts up to all T3 turbine housings with a 2.5" ID 3-bolt discharge. Easily welds to any 2.5" downpipe to allow for ez downpipe to turbo connection. Note: This flange also bolt to our T3 5_bolt internal wastegates.
-- Precision CNC Machined From Billet Mild Steel
-- Thick Solid One Piece design (will not warp like others)
--Great For High Heat Applications
-- 2.5" Inner Diameter (Fits all 2.5" Pipes)
Made In USA
HR T25/ GT25 /T28/ GT28 special Pocket Carved downpipe discharge/outlet mounting flange. For T25/GT25 internal waste gate turbo turbine housings. Outstanding finish with a pocket machined carved in to the flange to clear the internal wastegate swing valves. 2" opening for 2.00 inch downpipes.
- Brand: HIMN'I Racing
- Design: T25/ GT25 /T28/ GT28 Pocket Carved down pipe exhaust flange.
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm bolts/studs or SAE equivalent.
- Inner Diameter: 2.00" round w/ recessed alignment lip/groove. For 2.00 inch O.D. tube/pipe/downpipe/exhaust
- Overall Thickness/Height: 3/4" inch (0.750") Resists Warping
- Material Type: Mild Carbon Steel or 304 Stainless steel. (select from menu)
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits all T25 / T28 / GT25 / GT28 exhaust housings with internal wastegate such as: T25, T28, GT25, GT28, GT25R, GT2554R, GT2560R, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GT3071R-WG, GTX2860R, GTX2863R, GTX2867R, GT3076R-WG, etc.
$53.90Made In USA
HR T25/ GT25 /T28/ GT28 divorced/ divided downpipe discharge/outlet mounting flange. For T25/GT25 internal waste gate turbo turbine housings. 1/2" thick, machined Stainless steel downpipe discharge outlet flange with divided/ divorced down pipe & wastegate ports. Allows the internal wastegate & downpipe to use separate pipes/tubes. (like a external waste gate) Provides a less restrictive flow path for the wastegate as it's no longer mixing with the down pipe flow. Just like a external waste gate, the wastegate pipe can dumped to open air (race only) or plumbed back into the exhaust.
- Brand: HIMN'I Racing
- Design: T25/ GT25 /T28/ GT28 divorced down pipe exhaust flange.
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm bolts/studs or SAE equivalent.
- Inner Diameter #1: 2.25" round w/ recessed alignment lip/groove. For 2.25 inch O.D. tube/pipe/downpipe/exhaust
- Inner Diameter #2: 1.50" round (wastegate port)
- Overall Thickness/Height: 1/2" inch (0.500") Resists Warping
- Material Type: 304L Stainless Steel
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Fits all T25 / T28 / GT25 / GT28 exhaust housings with internal wastegate such as: T25, T28, GT25, GT28, GT25R, GT2554R, GT2560R, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GT3071R-WG, GTX2860R, GTX2863R, GTX2867R, GT3076R-WG, etc.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$48.00Made In USA
HR Turbo To Downpipe Converter discharge/exist adapter. Converts standard T25/ T28/ GT25/ GT28 5_Bolt exhaust/turbine housing downpipe discharge to a 2.50" or 3.00" V-band exit. (your choice, select from menu) The outer 5 holes are used to bolt the adapter flange to the back of a T25 internal wastegate exhaust/turbine housing, converting to a V-band for use with 2.50" or 3.00" downpipe. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined and rainbow TIG welded.
- Brand: HIMN'I Racing
- Design: T25/ T28/ GT25/ GT28 To V-band Adapter 3.00"
- Adapter Side #1: T25 outlet Oval
- Adapter Side #2, Option #1: 2.50" V-band with 2.50" Inch I.D./ 3 1/16" O.D. flat face.
- Adapter Side #2 Option #2: 3.00" V-band with 3.00" I.D., 3 5/8" (92mm) O.D. face side.
- Adapter Side #2 Option #3: 3.00" V-band with 3.00" I.D., 3 3/4" (95mm) O.D. face side. (Most common)
- Bolt Hole size: For use with standard 8mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 2 1/4" Inch (2.25")
- Material Type: Mild Carbon & stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.
Always confirm your bolt spacing to unsure this is the correct item for your application. Fits most T25, T28, GT25, GT28 Internal wastegate exhaust housings, Including:
T25, T28, GT25, GT28, GT25R, GT2554R, GT2560R, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GT3071R-WG, GTX2860R, GTX2863R, GTX2867R, GT3076R-WG, S200, etc
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.
$89.90Special Formed Tube, 3" Round (downpipe side) to Oval UIWG style transition for use with 5 bolt internal waste gate swing valve flange found on our site. Made of stainless steel in the USA.
$16.80Hands down, best supplier of parts ANYWHERE...PERIOD. Fast service and very knowledgeable staff helped our build and continues to be a resource when......
Read More ->
I ordered a Tial blow off valve and it was at my door in only 3 days! The serial number checked out with TiAl as authentic. No one else had the color......
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.