Categories
- Turbochargers
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- -: Aluminum Tubing - Brushed
- -: Aluminum Tubing - Polished
- -: Stainless Steel Tubing
- -: Straight Silicone Couplers
- -: Straight Silicone Lenghts
- -: Hump Silicone Couplers
- -: Transition Silicone Couplers
- -: 45 Degree Silicone Couplers
- -: 90 Degree Silicone Couplers
- -: 135 degree Silicone Couples
- -: T-BOLT CLAMPS
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
English
HR .75" 90 Degree Turbo Silicone Coupler/Elbow (3/4")
HR .75" (3/4") 90 degree silicone turbo coupler/hose/elbow. Extra strong 4 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA. The smaller (.50”-1.75”) sized couplers are also great for radiator & water plumbing.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 0.75” I.D.
- Degree Of Bend: 90
- Leg Length: 3”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4 ply
- Fiber Reinforced?: Yes
HR 1.00" 90 Degree Turbo Silicone Coupler/Elbow
HR 1.00" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Blue or Black. Great for tight spaces & Made In USA. The smaller (.50”-1.75”) sized couplers are also great for radiator & water plumbing.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 1.00” I.D.
- Degree Of Bend: 90
- Leg Length: 3”-4” long (depending on size & radius selected)
- Wall Thickness: 4 ply
- Fiber Reinforced?: Yes
HR 1.50" 90 Degree Turbo Silicone Coupler/Elbow
HR 1.50" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA. The smaller (.50”-1.75”) sized couplers are also great for radiator & water plumbing.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 1.50” I.D.
- Degree Of Bend: 90
- Leg Length: 3”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4 ply
- Fiber Reinforced?: Yes
HR 2.00" TO 2.25" 90 Degree Transition Silicone Coupler
HR 2.00" to 2.25” 90 degree transition turbo silicone coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Blue or Black. Great for tight spaces & Made In USA.
These transition hoses allow you to adapt between two different sizes of tubes/pipes. Step up or step down from the intercooler, turbo inlets, turbo outlets, throttle body connections, etc.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size #1: 2.00” I.D.
- Coupler Size #2: 2.25” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 2.00" TO 2.50" 90 Degree Transition Silicone Coupler
HR 2.00" to 2.50” 90 degree transition turbo silicone coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA.
These transition hoses allow you to adapt between two different sizes of tubes/pipes. Step up or step down from the intercooler, turbo inlets, turbo outlets, throttle body connections, etc.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size #1: 2.00” I.D.
- Coupler Size #2: 2.50” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 2.00" TO 3.00" 90 Degree Transition Silicone Coupler
HR 2.00" to 3.00” 90 degree transition turbo silicone coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Blue or Black. Great for tight spaces & Made In USA.
These transition hoses allow you to adapt between two different sizes of tubes/pipes. Step up or step down from the intercooler, turbo inlets, turbo outlets, throttle body connections, etc.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size #1: 2.00” I.D.
- Coupler Size #2: 3.00” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 2.50" TO 3.00" 90 Degree Transition Silicone Coupler
HR 2.50" to 3.00” 90 degree transition turbo silicone coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Blue or Black. Great for tight spaces & Made In USA.
These transition hoses allow you to adapt between two different sizes of tubes/pipes. Step up or step down from the intercooler, turbo inlets, turbo outlets, throttle body connections, etc.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size #1: 2.50” I.D.
- Coupler Size #2: 3.00” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 3.00" TO 4.00" 90 Degree Transition Silicone Coupler
HR 3.00" to 4.00” 90 degree transition turbo silicone coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA.
These transition hoses allow you to adapt between two different sizes of tubes/pipes. Step up or step down from the intercooler, turbo inlets, turbo outlets, throttle body connections, etc.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size #1: 3.00” I.D.
- Coupler Size #2: 4.00” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
Bestsellers
Customer Testimonials
I called and placed my order over the phone. I had a bunch of questions and the lady was kind and very helpful. She made sure I got all the right......
Read More ->
Great customer
Fast shipping and thoughtfull custoemer service. Laffy taffy happens to be my favorite thanks.
- Alexsandro M. Covington, VA...
Read More ->
