HR .75" (3/4") 90 degree silicone turbo coupler/hose/elbow. Extra strong 4 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA. The smaller (.50”-1.75”) sized couplers are also great for radiator & water plumbing.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 0.75” I.D.
- Degree Of Bend: 90
- Leg Length: 3”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4 ply
- Fiber Reinforced?: Yes
HR 1.00" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Blue or Black. Great for tight spaces & Made In USA. The smaller (.50”-1.75”) sized couplers are also great for radiator & water plumbing.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 1.00” I.D.
- Degree Of Bend: 90
- Leg Length: 3”-4” long (depending on size & radius selected)
- Wall Thickness: 4 ply
- Fiber Reinforced?: Yes
HR 1.25" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA. The smaller (.50”-1.75”) sized couplers are also great for radiator & water plumbing.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler's wall thickness.
- Coupler Size: 1.25” I.D.
- Degree Of Bend: 90
- Leg Length: 3”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4 ply
- Fiber Reinforced?: Yes
HR 1.50" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA. The smaller (.50”-1.75”) sized couplers are also great for radiator & water plumbing.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 1.50” I.D.
- Degree Of Bend: 90
- Leg Length: 3”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4 ply
- Fiber Reinforced?: Yes
HR 2.00" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 2.00” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 2.25" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 2.25” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 2.50" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 2.50” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 2.75" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 2.75” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 3.00" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 3.00” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 3.50" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Blue or Black. Great for tight spaces & Made In USA.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 3.50” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 4.00" 90 degree silicone turbo coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size: 4.00” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 2.00" to 2.25” 90 degree transition turbo silicone coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Blue or Black. Great for tight spaces & Made In USA.
These transition hoses allow you to adapt between two different sizes of tubes/pipes. Step up or step down from the intercooler, turbo inlets, turbo outlets, throttle body connections, etc.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size #1: 2.00” I.D.
- Coupler Size #2: 2.25” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 2.00" to 2.50” 90 degree transition turbo silicone coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA.
These transition hoses allow you to adapt between two different sizes of tubes/pipes. Step up or step down from the intercooler, turbo inlets, turbo outlets, throttle body connections, etc.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size #1: 2.00” I.D.
- Coupler Size #2: 2.50” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 2.00" to 2.75” 90 degree transition turbo silicone coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA.
These transition hoses allow you to adapt between two different sizes of tubes/pipes. Step up or step down from the intercooler, turbo inlets, turbo outlets, throttle body connections, etc.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size #1: 2.00” I.D.
- Coupler Size #2: 2.75” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 2.00" to 3.00” 90 degree transition turbo silicone coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Blue or Black. Great for tight spaces & Made In USA.
These transition hoses allow you to adapt between two different sizes of tubes/pipes. Step up or step down from the intercooler, turbo inlets, turbo outlets, throttle body connections, etc.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size #1: 2.00” I.D.
- Coupler Size #2: 3.00” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 2.50" to 3.00” 90 degree transition turbo silicone coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Blue or Black. Great for tight spaces & Made In USA.
These transition hoses allow you to adapt between two different sizes of tubes/pipes. Step up or step down from the intercooler, turbo inlets, turbo outlets, throttle body connections, etc.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size #1: 2.50” I.D.
- Coupler Size #2: 3.00” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
HR 3.00" to 4.00” 90 degree transition turbo silicone coupler/hose/elbow. Extra strong 4-5 ply & fiber reinforced. High quality, extremely durable & withstands high heat applications. For turbo intercooler pipe/tubing/ plumbing connections, air intakes, etc. Smooth glossy finish. Available in your choice of Red, Blue or Black. Great for tight spaces & Made In USA.
These transition hoses allow you to adapt between two different sizes of tubes/pipes. Step up or step down from the intercooler, turbo inlets, turbo outlets, throttle body connections, etc.
NOTE:: All hose/coupler sizes are measured by inside diameter. (I.D.) For example, a 2" coupler fits 2" OD tubing. For proper installation, each coupler should be used with a larger t-bolt clamp ranging from .25” to .50” greater in size to accommodate for the coupler’s wall thickness.
- Coupler Size #1: 3.00” I.D.
- Coupler Size #2: 4.00” I.D.
- Degree Of Bend: 90
- Leg Length: 2”-4” long (depending on size, radius selected & production run)
- Wall Thickness: 4-5 ply
- Fiber Reinforced?: Yes
I can't thank Himni enough for your awesome customer service and technical help. The turbo parts fit perfect. My new favorite turbo shop!
- Chris Y.......
Read More ->
I ordered a Tial blow off valve and it was at my door in only 3 days! The serial number checked out with TiAl as authentic. No one else had the color......
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.