Categories
- Turbochargers
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- -Subaru WRX / STI
- -: Clutch / Transmission
- -: Engine & Electronics
- -: Exhaust / Manifolds
- -: Exterior & Interior
- -: Fuel Supply
- -: Intake & Intercoolers
- -: Suspension
- -: Turbo Upgrades
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
English
Clutch Masters Stage 1 (FX100) Clutch Kit - WRX
High performance street system, holding capacity is 70% more then stock. Includes Heavy-Duty reinforced pressure plate and Sprung hub/cushioned disc. Fits Turbo Subaru WRX 02+ -| Retail: $550.99 |-
Clutch Masters Stage 1 FX100 Clutch Kits
Steel Back Heavy Duty Street System (70% Over stock holding capacity)
The FX100 System uses the Power Plus I Pressure Plate with the Street Back organic disc. This clutch is engineered for heavy-duty street use. It is specifically designed for extended wear and additional clamping force for the enthusiast who has added an exhaust system, and intake system, up to 50hp nitrous upgrade, or other non-forced induction external bolt-ons. As with most Clutch Masters clutches, the FX100 incorporates the Hi-Leverage pressure plate design and the steel back disc. It features only slightly increased pedal pressure (over stock components), longer life than stock, and normal clutch feel during engagement and disengagement for a very smooth operateion.
Features of the FX100:
-Power Plus I Pressure Plate
-Hi-Leverage Design
-Ductile Iron
-Precision Heat-Treated Single Diaphrgm
-Re-Arched Diaphragm for Superior Disengagement
-Heavy-Duty Straps
-Very High Clamping Force
-No Unnecessary Increase in Pedal Pressure
-Special Heavy Duty Organic Friction Material
-Steel Back Disc
-Heavy Duty Sprung Hub
-Marcel Spring Wafer
-OEM or Better Release Bearing
-Pilot Bearing (if applicable)
-Alignment Tool
-Instruction Card (if applicable)
-Decals
Clutch Masters Stage 3 (FX300) Clutch Kit- WRX
The Clutch Masters Stage 3 (FX300) System uses the Power Plus I Pressure Plate with the Steel Back Segmented Kevlar disc. This clutch is disigned for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp Nitrous. The FX300 features only slightly increased pedal pressure (overstock components), long life disc and smooth engagement. Fit 02+ WRX
Segmented Kevlar Steel Back System
110% over stock holding capacity
Extra Long Life & Heavy Duty
Features of the FX300:
-Power Plus I Pressure Plate
-Hi-Leverage Design
-Ductile Iron
-Precision Heat Treated Single Diaphragm
-Re-Arched Diaphragm for Superior Disengagement
-Heavy-Duty Straps
-Very High Clamping FOrce
-No Unnecessary Increase in Pedal Pressure
-Segmented Kevlar Disc
-Steel Backing Plate
-Segmented Kevlar Friction Material
-Sprung Hub
-Marcel Spring Wafer
-OEM or Better Release Bearing
-Pilot Bearing (if applicable)
-Alignment Tool
-Instruciton Card (if applicable)
-Decals
Clutch Masters Stage 4 (FX400) Clutch Kit - WRX
Ceramic System
170% over stock holding capacity
Ultra Heavy Duty Street and/or Racing The FX400 System uses the Power Plus I Pressure Plate with Ceramic disc. This is the ultimate, extreme duty street, or road/drag racing system. It is built using a special 4-wing Ceramic button design disc for long life, outstanding holding capacity, and high heat dissepation. Fits 02+ WRX
Warning: The Ceramic disc engages very quickly and may chatter slighly upon starting from a stop.
Features of the FX400:
-Power Plus I Pressure Plate
-Hi-Leverage Design
-Ductile Iron
-Heavy-Duty Straps
-Precision Heat Treated Single Diaphragm
-Re-Arched Diaphragm for Superior Disengagement
-Very High Clamping Force
-No Unnecessary Increase in Pedal Pressure
-4-Wing Ceramic Button Disc
-Sprung Hub
-No Marce
-OEM or Better Release Bearing
-Pilot Bearing (if applicable)
-Alignment Tool
-Instruction Card (if applicable)
-Decals
Cusco Stiff Shifter Bushings - Subaru WRX
This Cusco shifter bushing kit for 02+ Subaru Impreza WRX's includes a stiff shifter stabilizer bar bushing made of high performance urethane. The bushing's one-piece design offers greatly improved shifter feel compared to the soft rubber part that comes on the WRX from the factory. This parts easiy installs in your driveway with simple hand tools. After installation you will notice a much firmer shifter and rifle bolt action. This kit is a huge improvement over the mushy, vague stock shifter feel. Fits Subaru WRX 02+
$38.90
Energy Suspension Stiff Shifter Bushing Kit - WRX 02+
This Energy Suspension shifter bushing kit for 02+ Subaru Impreza WRX's includes a stiff shifter stabilizer bar bushing made of high performance urethane. The bushing's one-piece design offers greatly improved shifter feel compared to the soft rubber part that comes on the WRX from the factory. Fits Subaru WRX 02+
$15.00
Perrin Short Throw Shifter Kit - Subaru WRX
The first adjustable short shifter adapter on the market! The PERRIN short shifter fits all Subaru Impreza models 2002 and newer. The PERRIN short shifter retains the original shifter lever with it's anti vibration shaft. The original shifter has a rubber vibration damper inside of the rod to give you a comfortable shift. Other shifters replace the entire shifter rod. These are prone to annoying rattles and vibrations which come from the solid shifter rod. The PERRIN shifter adapting to the stock shifter rod guarantees a rattle and vibration free install as well as the flexibility of adjustment. Simple one bolt adjustment allows you to easily adjust the shifter throw easy to. Easy to follow illustrated instructions shows you how to install your short shifter in only 15 min.
$83.50
Perrin WRX Shift Knob - Polished Silver
Machined from billet aluminum polished finish and and etched with the perrin logo. Special collar machined into base allows the stock shift boot to attach to the shift knob. Designed specifically for the Subaru WRX 02+.
$57.00
Stainless Clutch Line - Subaru WRX 02-03
As many have come to find out, the clutch engagement feels very soft/weak and the actual engagement point is difficult to hit on the spot accurately. This results in slipping the clutch more than is needed. This mod is for anyone who is looking to get rid of that unpredictable clutch engagement. After installation of the stainless line kit will you will notice improved feedback and overall feel of the clutch system. Fits Subaru WRX 02+
$25.20
Subaru RS 98-02 Stainless Clutch Line
As many have come to find out, the clutch engagement feels very soft/weak and the actual engagement point is difficult to hit on the spot accurately. This results in slipping the clutch more than is needed. This mod is for anyone who is looking to get rid of that unpredictable clutch engagement. After installation of the stainless line kit will you will notice improved feedback and overall feel of the clutch system. Fits Subaru RS 98-02
$25.00Bestsellers
Customer Testimonials
I ordered a Tial blow off valve and it was at my door in only 3 days! The serial number checked out with TiAl as authentic. No one else had the color......
Read More ->
Fast From The US
very fast shipping for international!!!! thank you & i will be back for more soon.
-Michael E. Rattelsdorf, Germany...
Read More ->
