: Turbo Upgrades : Himni Racing, Turbocharger, Turbo, Garrett, Turbo Kit, GReddy, Mazda RX-7, HKS, Apexi, TiAL, TurboXS, TurboSmart, Flange, Turbonetics, Exhaust, Intercooler, ACT, Intake

GTX Garrett GTX3071R BILLET Turbo Upgrade Kit - WRX / STi

Internal wastegate version GTX3071R BB turbo kit with billet aluminum compressor wheel. Direct bolt on to the WRX/ STi stock turbo location & exhaust manifold. 1-2 hour install. This complete kit includes everything needed to install the upgrade.

Just like our standard internal wastegate GT3071R turbo kit but with the added 'X' factor that upgrades the turbo to the GTX3071R unit with forged billet compressor wheel & matching housing. Lighter, stronger 11 full blade design with a 10% higher gain & pressure ratio.

Each GT drop-in turbo package consists of a Garrett factory assembled and high speed balanced dual ball bearing turbo cartridge which is then assembled into a set of CNC machine ported housings that have been optimized in every aspect for maximum flow and efficiency.

Kit Includes everything:
Genuine Garrett GTX3071R with specially made & machined high flow housings.
Wastegate actuator & mounting bracket
All needed oil & water lines, fittings, mounting hardware & connectors, etc.
Turbo comes with a 1 year factory warranty.
Everything has been designed to properly and seamlessly graph the Garrett GT turbo to the EJ engine so that the fit is as OE as possible.

Just bolt the turbo on, add fueling and a good tune then prepare for a blast of acceleration. Garrett GT turbos offer more then just "peak HP" numbers. These genuine Garrett GT turbos off more torque area under the curve and more "accessible" power then any other turbos series out there.

$1,874.00

Add to Cart

Garrett GT28RS Turbo Upgrade Kit - WRX / STi

Direct bolt on to the WRX/ STi turbo stock location & exhaust manifold. 1-2 hour install... 350 HP - dyno proven. This complete kit includes everything needed.

The genuine Garrett Dual Ball Bearing GT82RS is the fastest spooling and most responsive 350+ HP capable turbo on the planet & is now available in a drop-in package for the Subaru WRX/STI! The easy to install turbo assembly that takes only takes 1-2 hours to install. Replaces the small, stock journal bearing VFXX turbo. This is made possible by the special high flowing GT inspired exhaust housing and custom engineered components built to suit the installation.

Each GT drop-in turbo package consists of a Garrett factory assembled and high speed balanced dual ball bearing turbo cartridge which is then assembled into a set of CNC machine ported housings that have been optimized in every aspect for maximum flow and efficiency.

Kit Includes everything:
Genuine Garrett GT28RS turbo with specially made & machined high flow housings.
Wastegate actuator & mounting bracket
All needed oil & water lines, fittings, mounting hardware & connectors, etc.
Turbo comes with a 1 year factory warranty.
Everything has been designed to properly and seamlessly graph the Garrett GT turbo to the EJ engine so that the fit is as OE as possible.

Just bolt the turbo on, add fueling and a good tune then prepare for a blast of acceleration. Garrett GT turbos offer more then just "peak HP" numbers. These genuine Garrett GT turbos off more torque area under the curve and more "accessible" power then any other turbos series out there.

The Garrett GT3071R is a very good match on the 2.5L, especially if you're looking for boost threshold that is close to stock but want enough airflow for 350+HP. All the boost is available all the time even at part to medium throttle. Boost recovery between gearshifts is awesome with full boost ready even before upshift is complete. resulting in the STI lurching forward with shear enthusiasm. The 2.0L driver should not rule out the use GT28RS if his HP target is in the same range. The modern generation wheels, coupled with an awesome wheel ratio, allows even the smaller displacement engine to provide adequate motivation to get the GT28RS going for an great powerband. The competition grade turbo still offers the best response and spool time out of any unit in this flow range.

Upgrading to a good flowing bellmouth downpipe and a high flowing inlet intake pipe will result in maximum output. channel air in and out of the turbo. Although every bolt-on GT turbo kit ships with a 3" inlet, we do provide a "stepdown" transition sleeve just in case you're forced to use the stock 2.25" inlet hose. But again, upgraded intake & downpipe will provide more maximize HP & boost response. Please also be aware that some downpipes such as the stock catted downpipe, has a "no-flow" door at the wastegate flapper area. This type of downpipe may not allow the wider swinging wastegate valve to open all the way, thus causing the possibility of a "boost-creep" condition. Again, a performance downpipe will perform better & stop this from happening.

$1,495.00

Add to Cart

Garrett GT2871R Turbo Upgrade Kit - WRX / STi

Direct bolt on to the WRX/ STi turbo stock location & exhaust manifold. 1-2 hour install... 400 HP - dyno proven. This complete kit includes everything needed.

The genuine Garrett Dual Ball Bearing GT2871R is the fastest spooling and most responsive 400+HP capable turbo on the planet & is now available in a drop-in package for the Subaru WRX/STI! The easy to install turbo assembly that takes only takes 1-2 hours to install. Replaces the small, stock journal bearing VFXX turbo. This is made possible by the special high flowing GT inspired exhaust housing and custom engineered components built to suit the installation.

Each GT drop-in turbo package consists of a Garrett factory assembled and high speed balanced dual ball bearing turbo cartridge which is then assembled into a set of CNC machine ported housings that have been optimized in every aspect for maximum flow and efficiency.

Kit Includes everything:
Genuine Garrett GT2871R with specially made & machined high flow housings.
Wastegate actuator & mounting bracket
All needed oil & water lines, fittings, mounting hardware & connectors, etc.
Turbo comes with a 1 year factory warranty.
Everything has been designed to properly and seamlessly graph the Garrett GT turbo to the EJ engine so that the fit is as OE as possible.

Just bolt the turbo on, add fueling and a good tune then prepare for a blast of acceleration. Garrett GT turbos offer more then just "peak HP" numbers. These genuine Garrett GT turbos off more torque area under the curve and more "accessible" power then any other turbos series out there.

The Garrett GT2871R is a great match on the 2.5L, especially if you're looking for boost threshold that is close to stock but want enough airflow for 400+HP. Almost all the boost is available all the time even at part to medium throttle. Boost recovery between gearshifts is awesome with full boost ready even before upshift is complete. resulting in the STI lurching forward with shear enthusiasm. The 2.0L driver should not rule out the use GT2871R if his HP target is in the same range. The modern generation wheels, coupled with an awesome wheel ratio, allows even the smaller displacement engine to provide adequate motivation to get the GT2871R going for an great powerband. The competition grade turbo still offers the best response and spool time out of any unit in this flow range.

Upgrading to a good flowing bellmouth downpipe and a high flowing inlet intake pipe will result in maximum output. channel air in and out of the turbo. Although every bolt-on GT turbo kit ships with a 3" inlet, we do provide a "stepdown" transition sleeve just in case you're forced to use the stock 2.25" inlet hose. But again, upgraded intake & downpipe will provide more maximize HP & boost response. Please also be aware that some downpipes such as the stock catted downpipe, has a "no-flow" door at the wastegate flapper area. This type of downpipe may not allow the wider swinging wastegate valve to open all the way, thus causing the possibility of a "boost-creep" condition. Again, a performance downpipe will perform better & stop this from happening.

$1,550.00

Add to Cart

Garrett GT3071R Turbo Upgrade Kit - WRX / STi

Direct bolt on to the WRX/ STi turbo stock location & exhaust manifold. 1-2 hour install... 450 HP - dyno proven. This complete kit includes everything needed.

The genuine Garrett Dual Ball Bearing GT3071R is the fastest spooling and most responsive 450+HP capable turbo on the planet & is now available in a drop-in package for the Subaru WRX/STI! The easy to install turbo assembly that takes only takes 1-2 hours to install. Replaces the small, stock journal bearing VFXX turbo. This is made possible by the special high flowing GT inspired exhaust housing and custom engineered components built to suit the installation.

Each GT drop-in turbo package consists of a Garrett factory assembled and high speed balanced dual ball bearing turbo cartridge which is then assembled into a set of CNC machine ported housings that have been optimized in every aspect for maximum flow and efficiency.

Kit Includes everything:
Genuine Garrett GT3071R with specially made & machined high flow housings.
Wastegate actuator & mounting bracket
All needed oil & water lines, fittings, mounting hardware & connectors, etc.
Turbo comes with a 1 year factory warranty.
Everything has been designed to properly and seamlessly graph the Garrett GT turbo to the EJ engine so that the fit is as OE as possible.

Just bolt the turbo on, add fueling and a good tune then prepare for a blast of acceleration. Garrett GT turbos offer more then just "peak HP" numbers. These genuine Garrett GT turbos off more torque area under the curve and more "accessible" power then any other turbos series out there.

The Garrett GT3071R is a great match on the 2.5L, especially if you're looking for boost threshold that is close to stock but want enough airflow for 450+HP. Almost all the boost is available all the time even at part to medium throttle. Boost recovery between gearshifts is awesome with full boost ready even before upshift is complete. resulting in the STI lurching forward with shear enthusiasm. The 2.0L driver should not rule out the use GT3071R if his HP target is in the same range. The modern generation wheels, coupled with an awesome wheel ratio, allows even the smaller displacement engine to provide adequate motivation to get the GT3071R going for an great powerband. The competition grade turbo still offers the best response and spool time out of any unit in this flow range.

Upgrading to a good flowing bellmouth downpipe and a high flowing inlet intake pipe will result in maximum output. channel air in and out of the turbo. Although every bolt-on GT turbo kit ships with a 3" inlet, we do provide a "stepdown" transition sleeve just in case you're forced to use the stock 2.25" inlet hose. But again, upgraded intake & downpipe will provide more maximize HP & boost response. Please also be aware that some downpipes such as the stock catted downpipe, has a "no-flow" door at the wastegate flapper area. This type of downpipe may not allow the wider swinging wastegate valve to open all the way, thus causing the possibility of a "boost-creep" condition. Again, a performance downpipe will perform better & stop this from happening.

$1,670.00

Add to Cart

Garrett GT35R Turbo Upgrade Kit - WRX / STi

Direct bolt on to the WRX/ STi turbo stock location & exhaust manifold. 1-2 hour install... 600 HP - dyno proven. This complete kit includes everything needed.

The genuine Garrett Dual Ball Bearing GT35R is the fastest spooling and most responsive 600 + HP capable turbo on the planet & is now available in a drop-in package for the Subaru WRX/STI! The easy to install turbo assembly that takes only takes 1-2 hours to install. Replaces the small, stock journal bearing VFXX turbo. This is made possible by the special high flowing GT inspired exhaust housing and custom engineered components built to suit the installation.

Each GT drop-in turbo package consists of a Garrett factory assembled and high speed balanced dual ball bearing turbo cartridge which is then assembled into a set of CNC machine ported housings that have been optimized in every aspect for maximum flow and efficiency.

Kit Includes everything:
Genuine Garrett GT35R with specially made & machined high flow housings.
Wastegate actuator & mounting bracket
All needed oil & water lines, fittings, mounting hardware & connectors, etc.
Turbo comes with a 1 year factory warranty.
Everything has been designed to properly and seamlessly graph the Garrett GT turbo to the EJ engine so that the fit is as OE as possible.

Just bolt the turbo on, add fueling and a good tune then prepare for a blast of acceleration. Garrett GT turbos offer more then just "peak HP" numbers. These genuine Garrett GT turbos off more torque area under the curve and more "accessible" power then any other turbos series out there.

The Garrett GT35R is a great match on the 2.5L, especially if you're looking for boost threshold that is close to stock but want enough airflow for 600 + HP. Almost all the boost is available all the time even at part to medium throttle. Boost recovery between gearshifts is awesome with full boost ready even before upshift is complete. resulting in the STI lurching forward with shear enthusiasm. The 2.0L driver should not rule out the use GT35R if his HP target is in the same range. The modern generation wheels, coupled with an awesome wheel ratio, allows even the smaller displacement engine to provide adequate motivation to get the GT35R going for an great powerband. The competition grade turbo still offers the best response and spool time out of any unit in this flow range.

Upgrading to a good flowing bellmouth downpipe and a high flowing inlet intake pipe will result in maximum output. channel air in and out of the turbo. Although every bolt-on GT turbo kit ships with a 3" inlet, we do provide a "stepdown" transition sleeve just in case you're forced to use the stock 2.25" inlet hose. But again, upgraded intake & downpipe will provide more maximize HP & boost response. Please also be aware that some downpipes such as the stock catted downpipe, has a "no-flow" door at the wastegate flapper area. This type of downpipe may not allow the wider swinging wastegate valve to open all the way, thus causing the possibility of a "boost-creep" condition. Again, a performance downpipe will perform better & stop this from happening.

$1,800.00

Add to Cart

Garrett GT3071R Turbo Kit - WRX / STi - External Wastegate

External wastegate kit for superior boost control. Direct bolt on to the WRX/ STi turbo stock location & exhaust manifold. 1-2 hour install... 450 HP - dyno proven. This complete kit includes everything needed.

The genuine Garrett Dual Ball Bearing GT3071R is the fastest spooling and most responsive 450+HP capable turbo on the planet & is now available in a drop-in package for the Subaru WRX/STI! The easy to install turbo assembly that takes only takes 1-2 hours to install. Replaces the small, stock journal bearing VFXX turbo. This is made possible by the special high flowing GT inspired exhaust housing and custom engineered components built to suit the installation.

Each GT drop-in turbo package consists of a Garrett factory assembled and high speed balanced dual ball bearing turbo cartridge which is then assembled into a set of CNC machine ported housings that have been optimized in every aspect for maximum flow and efficiency.

Kit Includes
Genuine Garrett GT3071R with specially made & machined high flow housings.
Wastegate actuator & mounting bracket
All needed oil & water lines, fittings, mounting hardware & connectors, etc.
Turbo comes with a 1 year factory warranty.
Everything has been designed to properly and seamlessly graph the Garrett GT turbo to the EJ engine so that the fit is as OE as possible.
Tial 44mm wastegate & dump tube sold separately.

Just bolt the turbo on, add fueling, A Tial 44mm wastegate & dump tube, then prepare for a blast of acceleration. Garrett GT turbos offer more then just "peak HP" numbers. These genuine Garrett GT turbos off more torque area under the curve and more "accessible" power then any other turbos series out there.

The Garrett GT3071R is a great match on the 2.5L, especially if you're looking for boost threshold that is close to stock but want enough airflow for 450+HP. Almost all the boost is available all the time even at part to medium throttle. Boost recovery between gearshifts is awesome with full boost ready even before upshift is complete. resulting in the STI lurching forward with shear enthusiasm. The 2.0L driver should not rule out the use GT3071R if his HP target is in the same range. The modern generation wheels, coupled with an awesome wheel ratio, allows even the smaller displacement engine to provide adequate motivation to get the GT3071R going for an great powerband. The competition grade turbo still offers the best response and spool time out of any unit in this flow range.

Note::: You need to buy the Tial 44mm external wastegate & dump tube to complete the kit. Both items are available on our site.

$1,660.00

Add to Cart

Garrett GT3076R Turbo Kit - WRX / STi - External Wastegate

External wastegate kit for superior boost control. Direct bolt on to the WRX/ STi turbo stock location & exhaust manifold. 1-2 hour install... 500 HP - dyno proven. This complete kit includes everything needed.

The genuine Garrett Dual Ball Bearing GT3076R is the fastest spooling and most responsive 500+HP capable turbo on the planet & is now available in a drop-in package for the Subaru WRX/STI! The easy to install turbo assembly that takes only takes 1-2 hours to install. Replaces the small, stock journal bearing VFXX turbo. This is made possible by the special high flowing GT inspired exhaust housing and custom engineered components built to suit the installation.

Each GT drop-in turbo package consists of a Garrett factory assembled and high speed balanced dual ball bearing turbo cartridge which is then assembled into a set of CNC machine ported housings that have been optimized in every aspect for maximum flow and efficiency.

Kit Includes
Genuine Garrett GT3076R with specially made & machined high flow housings.
Wastegate actuator & mounting bracket
All needed oil & water lines, fittings, mounting hardware & connectors, etc.
Turbo comes with a 1 year factory warranty.
Everything has been designed to properly and seamlessly graph the Garrett GT turbo to the EJ engine so that the fit is as OE as possible.
Tial 44mm wastegate & dump tube sold separately.

Just bolt the turbo on, add fueling, A Tial 44mm wastegate & dump tube, then prepare for a blast of acceleration. Garrett GT turbos offer more then just "peak HP" numbers. These genuine Garrett GT turbos off more torque area under the curve and more "accessible" power then any other turbos series out there.

The Garrett GT3076R is a great match on the 2.5L, especially if you're looking for boost threshold that is close to stock but want enough airflow for 500 HP. Almost all the boost is available all the time even at part to medium throttle. Boost recovery between gearshifts is awesome with full boost ready even before upshift is complete. resulting in the STI lurching forward with shear enthusiasm. The 2.0L driver should not rule out the use GT3076R if his HP target is in the same range. The modern generation wheels, coupled with an awesome wheel ratio, allows even the smaller displacement engine to provide adequate motivation to get the GT3071R going for an great powerband. The competition grade turbo still offers the best response and spool time out of any unit in this flow range.

Note::: You need to buy the Tial 44mm external wastegate & dump tube to complete the kit. Both items are available on our site.

$1,660.00

Add to Cart

Garrett GT35R Turbo Kit - WRX / STi - External Wastegate

External wastegate kit for superior boost control. Direct bolt on to the WRX/ STi turbo stock location & exhaust manifold. 1-2 hour install... 6000 HP - dyno proven. This complete kit includes everything needed.

The genuine Garrett Dual Ball Bearing GT35R is the fastest spooling and most responsive 600 HP capable turbo on the planet & is now available in a drop-in package for the Subaru WRX/STI! The easy to install turbo assembly that takes only takes 1-2 hours to install. Replaces the small, stock journal bearing VFXX turbo. This is made possible by the special high flowing GT inspired exhaust housing and custom engineered components built to suit the installation.

Each GT drop-in turbo package consists of a Garrett factory assembled and high speed balanced dual ball bearing turbo cartridge which is then assembled into a set of CNC machine ported housings that have been optimized in every aspect for maximum flow and efficiency.

Kit Includes
Genuine Garrett GT35RR with specially made & machined high flow housings.
Wastegate actuator & mounting bracket
All needed oil & water lines, fittings, mounting hardware & connectors, etc.
Turbo comes with a 1 year factory warranty.
Everything has been designed to properly and seamlessly graph the Garrett GT turbo to the EJ engine so that the fit is as OE as possible.
Tial 44mm wastegate & dump tube sold separately.

Just bolt the turbo on, add fueling, A Tial 44mm wastegate & dump tube, then prepare for a blast of acceleration. Garrett GT turbos offer more then just "peak HP" numbers. These genuine Garrett GT turbos off more torque area under the curve and more "accessible" power then any other turbos series out there.

The Garrett GT35R is a great match on the 2.5L, especially if you're looking for boost threshold that is close to stock but want enough airflow for 600 HP. Almost all the boost is available all the time even at part to medium throttle. Boost recovery between gearshifts is awesome with full boost ready even before upshift is complete. resulting in the STI lurching forward with shear enthusiasm. The 2.0L driver should not rule out the use GT35R if his HP target is in the same range. The modern generation wheels, coupled with an awesome wheel ratio, allows even the smaller displacement engine to provide adequate motivation to get the GT35R going for an great powerband. The competition grade turbo still offers the best response and spool time out of any unit in this flow range.

Note::: You need to buy the Tial 44mm external wastegate & dump tube to complete the kit. Both items are available on our site.

$1,790.00

Add to Cart

Categories

Reviews [more]

Newsletter

: Turbo Upgrades

Bestsellers

Customer Testimonials

LATEST PRODUCTS

EXTRAS

GET IN TOUCH

SUPPORTS

Categories

Reviews [more]

Newsletter

: Turbo Upgrades

GTX Garrett GTX3071R BILLET Turbo Upgrade Kit - WRX / STi

GTX Garrett GTX3071R Turbo Kit - WRX / STi - External Wastegate

GTX Garrett GTX3076R BILLET Turbo Upgrade Kit - WRX / STi

GTX Garrett GTX3076R Turbo Kit - WRX / STi - External Wastegate

GTX Garrett GTX3582R BILLET Turbo Upgrade Kit - WRX / STi

GTX Garrett GTX3582R Turbo Kit - WRX / STi - External Wastegate

Garrett GT28RS Turbo Upgrade Kit - WRX / STi

Garrett GT2871R Turbo Upgrade Kit - WRX / STi

Garrett GT3071R Turbo Upgrade Kit - WRX / STi

Garrett GT35R Turbo Upgrade Kit - WRX / STi

Garrett GT3071R Turbo Kit - WRX / STi - External Wastegate

Garrett GT3076R Turbo Kit - WRX / STi - External Wastegate

Garrett GT35R Turbo Kit - WRX / STi - External Wastegate

Subaru Downpipe to Turbo Flange

Bestsellers

Customer Testimonials

LATEST PRODUCTS

EXTRAS

GET IN TOUCH

SUPPORTS