Categories
- Turbochargers
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- -Univesal Modular & Downpipes
- -Stainless Steel Pipes & Bends
- -Exhaust Accessories
- -Exhaust Flex Joints (Stainless)
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
English
1.00" Weld Nipple- Stainless Steel
1" weld nipple made from 304 stainless steel. Bead rolled for welding onto bigger pipe as blow-off valve reroute, breather, or misc. 1" port connection.
$9.00
3.00" 45 Degree V-band Pipe - Stainless Steel
High quality HR 3" diameter 45 degree V-band Stainless Steel pipe/elbow. Smooth mandrel bent with tight 3" center line radius. TIG welded 3" V-band flanges on each end. Made from 304 Stainless steel. Can be welded or clamped. Perfect for custom downpipes, up-pipes & exhaust systems.
Manufacture: Himni Racing
Flange Size: 3" V-band w/ 3.75" Outer Diameter (O.D.), Flat Face Sealing Surface.
Pipe/Tube Thickness: 16 gauge wall, 3 inch diameter.
Center Line Radius: Tight 3" CLR
Bend Angle: 45 Degree, smooth mandrel bent.
Leg Length #1: 4 inch long, Straight
Leg Length #2: 4 inch long, Straight
Origin: Made In USA
Includes: V-band pipe & (x1) matching V-band clamp.
Durable, rust & corrosion resistant. Suitable for high heat applications.
3.00" 90 Degree Low Profile V-band DownPipe - Stainless Steel
Made in the USA at HR. High quality Low Profile 3" diameter 90 degree Stainless Steel downpipe. Smooth mandrel bent with dual o2 sensor bungs. Fully TIG welded 3" V-band flanges on each end. Made from all 304 Stainless steel with SS flex bellow. Perfect to pack into tight spots where space is a issue.
Rust & corrosion resistant.
Durable & light weight
16 gauge wall thickness 304 SS
3.00" 90 Degree V-band Pipe - LONG Leg -Stainless Steel
High quality HR 3" diameter 90 degree V-band Stainless Steel pipe/elbow. Smooth mandrel bent with tight 3" center line radius. TIG welded 3" V-band flanges on each end. Made from 304 Stainless steel. Can be welded or clamped. Perfect for custom downpipes, up-pipes & exhaust systems.
Manufacture: Himni Racing
Flange Size: V-band, 3.75" Outer Diameter (O.D.), Flat Face Sealing Surface.
Pipe/Tube Thickness: 16 gauge wall, 3 inch diameter.
Center Line Radius: Tight 3" CLR
Bend Angle: 90 Degree, smooth mandrel bent.
Leg Length #1: 2 inch long, Straight
Leg Length #2: 6 inch long, Straight
Origin: Made In USA
Includes: V-band pipe & (x1) matching V-band clamp.
Durable, rust & corrosion resistant. Suitable for high heat applications.
3.00" 90 Degree V-band Pipe - SHORT Leg- Stainless Steel
High quality HR 3" diameter 90 degree V-band Stainless Steel pipe/elbow. Smooth mandrel bent with tight 3" center line radius. TIG welded 3" V-band flanges on each end. Made from 304 Stainless steel. Can be welded or clamped. Perfect for custom downpipes, up-pipes & exhaust systems.
Manufacture: Himni Racing
Flange Size: 3" V-band w/ 3.75" Outer Diameter (O.D.) Flat Face Sealing Surface.
Pipe/Tube Thickness: 16 gauge wall, 3 inch diameter.
Center Line Radius: Tight 3" CLR
Bend Angle: 90 Degree, smooth mandrel bent.
Leg Length #1: 0 inch long, Straight (legless)
Leg Length #2: 6 inch long, Straight
Origin: Made In USA
Includes: V-band pipe & (x1) matching V-band clamp.
Durable, rust & corrosion resistant. Suitable for high heat applications.
3.00" Straight V-Band Pipe - Stainless Steel Tube
Made in the USA. Himni Racing high quality 3" diameter straight Stainless Steel v-band pipe/tube. Pro rainbow TIG welded 3" V-band flanges on each end available in different sizes. (see below) Ideal for replacing out CATS & used as a "test pipe" or as an extension between two pipes, etc. Direct replacement for our high flow 3" V-band CAT. Also good for custom downpipes, up-pipes & exhaust systems. This item is normally in stock & ships within 1-72 hours.
- Brand: HIMN'I Racing
- Design: 3.00" Straight V-Band Extension pipe.
- Tube Side #1: (select from menu)
- A: 3" V-Band With 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face. (Standard/ Most Common 3 Inch size)
- B: 3" V-Band With 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face. (Slightly Smaller than above)
- Tube Side #2: (select from menu)
- A: 3" V-Band With 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face. (Standard/ Most Common 3 Inch size)
- B: 3" V-Band With 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face. (Slightly Smaller than above)
- Overall Length: (from v-band sealing face to v-band sealing face)
14" is Default. Available from 4"-24" long. Can be made to your exact length for no extra cost. (IE 12.5" long, 10.25" long, etc)
- Material Type: 304 USA made Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Rust & corrosion resistant.
- Durable & light weight
- 304 16 gauge tubing wall thickness
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects.
HR V-Band Flanges & Piping are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.
Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange and tubes to insure the very highest of quality.
$79.90Bestsellers
Customer Testimonials
Hands down, best supplier of parts ANYWHERE...PERIOD. Fast service and very knowledgeable staff helped our build and continues to be a resource when......
Read More ->
Great Customer Service!!
You guys are an example to every Shop! MANY THANKS for all your help!
- Kenneth B of Mosta, Malta...
Read More ->
