Categories
- Turbochargers
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- -Fuel Injectors - Universal
- -Fuel Rails & Parts
- -Black Anodized Hose Ends/Fitting
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
English
Fuel Injector Connector / Plug Kit
Electrical fuel injector connector kit for standard type EFI injector. Includes plug, retainer and pins for wires.
$9.90
Bosch EV6 Female to EV1 Male Fuel Injector Adapter Wire
Injector adapter wire. EV6 to EV1 male. Allows an injector with an EV6 oval plug/with side release style injector to be plugged into an older style EV1 square/Bosch style wiring harness.
$10.42
EV1 Fuel Injector Wire Clip Connector - Quick Release
This is a Quick-Release fuel injector connector clip for use all EV1 injectors. The best around. Eliminates the hassle associated with having to remove/install the metal retaining found on standard EV1 connectors. With this clip, simply push the spring & comes right off, resetting it's self to the lock position. Universal fit, High quality, made in USA.
Includes:
Pre-wired Quick-Release Connector
Connectors to install into the harness
Heat shrink.
Billet Aluminum Fuel Rail Stock 12 in Long
12" long/1 foot length 6061 T6 Aluminum Fuel Rail Stock. Billet lengths of aluminum for making custom fuel rails. Inside diameter allows rail to be easily tapped for 1/2" NPT fitting. Perfect for medium to high HP applications utilizing -6 to -10 AN size fuel lines.
Length: 12"
Bore Diameter: .6960", 17.68mm
Height: 1.36", 34.7mm
Width: .93", 23.7mm
Bosch TO EV1 Injector Wire Connector Adapter Clip- Quick Releas
RC Male Bosch TO Female EV1 Quick-Release fuel injector connector adapter/converter clip for use all standard EV1 fuel injectors. The highest quality available. The Bosch side of the adapter plugs easily into wire harnesses originally equipped with Bosch style injector connectors and converts it to a EV1 style quick release injector clip. Eliminates the need to cut or splice in a new connector. Hassle-free Ouick remove/install metal retaining clip is a huge time saver. With this clip, simply push the spring & it comes right off, resetting it's self to the lock position. Universal fit, High quality, made in USA.
Features:
- Connecter Side #1: Male Bosch Style (harness side)
- Connecter Side #2: Standard Female EV1 (injector sied)
- Special Order Item
Denso TO EV1 Injector Wire Connector Adapter Clip- Quick Releas
RC Male Denso TO Female EV1 Quick-Release fuel injector connector adapter/converter clip for use all standard EV1 fuel injectors. The highest quality available. The Denso side of the adapter plugs easily into wire harnesses originally equipped with Denso style injector connectors and converts it to a EV1 style quick release injector clip. Eliminates the need to cut or splice in a new connector. Hassle-free Ouick remove/install metal retaining clip is a huge time saver. With this clip, simply push the spring & it comes right off, resetting it's self to the lock position. Universal fit, High quality, made in USA.
Features:
- Connecter Side #1: Male Denso Style (harness side)
- Connecter Side #2: Standard Female EV1 (injector sied)
- Special Order Item
Honda TO EV1 Injector Wire Connector Adapter Clip- Quick Releas
RC Male Honda TO Female EV1 Quick-Release fuel injector connector adapter/converter clip for use all standard EV1 fuel injectors. The highest quality available. The Honda side of the adapter plugs easily into wire harnesses originally equipped with Honda style injector connectors and converts it to a EV1 style quick release injector clip. Eliminates the need to cut or splice in a new connector. Hassle-free Ouick remove/install metal retaining clip is a huge time saver. With this clip, simply push the spring & it comes right off, resetting it's self to the lock position. Universal fit, High quality, made in USA.
Features:
- Connecter Side #1: Male Honda Style (harness side)
- Connecter Side #2: Standard Female EV1 (injector sied)
- Special Order Item
Bosch Ev1 3-Way Fuel Injector Wire Plug Harness Connecter
3-Way fuel injector wire plug harness. Allows for an easy way to "tee" in an additional injector into an existing wiring loom. Male and female Bosch/EV1/Square connectors on one side and a signal tee'd into third female plug on 4ft (48") lead to drive the additional injector. ***Consult proper wiring use according to your application! ***
$21.00
HR Additional Fuel Injector Weld Boss/Bung
Himni Racing Additional Fuel Injector Weld Boss/Bung. Your choice of Mild steel or T6 billet aluminum. CNC Machined in the US to provide plenty of welding "meat" at the top & fits both Bosch/American O-ring (14mm) & Denso/Japaneses (11mm) fuel injectors. Slant cut angled lower outlet provides ideal injector flow pattern boss positioning to achieve optimum fuel atomization.
$35.95
Aeromotive 4 Port Fuel Distribution Log
Use Aeromotive fuel distribution blocks to direct fuel flow where you want it. These fuel distribution blocks are made from quality materials for a long-lasting product from a name you can trust.
Fuel Distribution Block Shape: Rectangle
Inlet Quantity: Two
Inlet Attachment: Female threads
Inlet Size: -8 AN
Outlet Quantity: Two
Outlet Attachment: Female threads
Outlet Size: -6 AN
Gauge Port: No
Fuel Pressure Gauge Included: No
Fuel Distribution Block Material: Billet aluminum
Fuel Distribution Block Finish: Black anodized
Features::
- (2) -08 AN Ports and (2) -06 AN Ports
Extra Fuel Injector Holder / Boss Kit
Big boost & HP requires big fueling. This kit allows you to add a additional fuel injector anyplace you need one. Unique design is the best available today. Has a billet aluminum top hat that acts as a mini fuel rail & secures to the lower boss via 2 stainless steel mounting bolts. Made to fit & seal perfectly with any Bosch style injector.
Kit Includes:
Lower Weld boss with angle cut (Specify Aluminum or Steel)
Aluminum Top hat that acts as mini rail
2 Stainless assembly retaining bolts
Top of Hat is threaded for 1/4" NPT so AN type fitting can be screwed on top. Can be welded just about anyplace. (intake manifold, throttle body inlet, intercooler pipe, intake pipe, etc.)
Forget those Mickey Mouse designed pieces that require clamping fuel hose directly to the top of the injector!
$68.99
Aeromotive 30 AMP Rating, 40 AMP Relay Fuel Pump Wiring Kit
These Aeromotive 30 amp fuel pump wiring kits are critical to achieve rated fuel pump performance. The factory wiring harness is not adequate to power high-performance, aftermarket fuel pumps.
Relay Included: Yes
Amperage Rating: 40 amps
Circuit Breaker Included: Yes
Wire Included: Yes
Wire Connectors Included: Yes
Features::
- Bosch 40 amp heavy duty anti-flyback relay
- 12 V, 30 amp circuit breaker
- 25 ft. of 10-gauge red wire
- 5 ft. of 10-gauge black wire
- Wire connectors for both ends
- Detailed wiring diagram
Aeromotive Billet Fuel Sample Valve
Make fuel checks simple with Aeromotive's billet fuel sample valves. The billet valve installs into any 1/8 in. NPT port. The sample port is equipped with a stainless steel barb fitting for extension hoses, and rotates 360 degrees for easy sampling. The spring-loaded safety valve keeps the sample valve sealed when unlocked, and rotates into a locked position when it's time for racing. When a fuel sample is required, rotate the valve to the unlocked position, press the valve for a fuel sample, re-lock the valve, and go racing.
Inlet Size: 1/8 in. NPT
Inlet Attachment: Male threads
Inlet Quantity: One
Outlet Size: 3/16 in.
Outlet Attachment: Hose barb
Outlet Quantity: One
Gauge Port: Yes
Gauge Port Size: 1/8 in. NPT
Sample Valve Material: Billet aluminum
Sample Valve Finish: Black anodized
Notes::
- Also available as a 3/8" Quick Connect Sample Valve Kit, P/N 17119
Aeromotive Fuel Distribution Log
The new Aeromotive Fuel Distribution Logs feature eight (8) -06 AN outlet ports and -10 AN inlet and outlet flow-through designed end ports. Now serious racers and performance enthusiast can distribute fuel to multiple locations all from one pump. This compact distribution log saves weight and expense by eliminating unnecessary plumbing. And, with the ability to run in-line with an Aeromotive Fuel Pressure regulator like the 13208 Pro Stock Regulator or the 13212 A2000 Bypass Regulator, the need for multiple pumps and tanks is virtually eliminated.
Fuel Distribution Block Shape: Y-block
Inlet Quantity: Two
Inlet Attachment: Female threads
Inlet Size: -10 AN
Outlet Quantity: Eight
Outlet Attachment: Female threads
Outlet Size: -6 AN
Gauge Port: No
Fuel Pressure Gauge Included: No
Fuel Distribution Block Material: Billet aluminum
Fuel Distribution Block Finish: Clear anodized
Notes::
- (2) -10 AN flow through end-ports.
- (8) -6 AN offset outlet ports.
- Offset ports make service in the field quick and easy.
- Compact size: 1.5″ tall x 4.625″ long x 1.25” wide.
Aeromotive 3/8" Billet Quick Connect, Fuel Sample Valve Kit
Includes Aeromotive’s Billet Fuel Sample Valve, designed to simplify installation and make fuel checks a snap! Packed with common sense features, it’s simply the best sample valve on the market.
Notes::
- Provides a duplicate 1/8” NPT port on the valve for installation of fuel pressure gauge or pressure sensor transducer.
- Sample port is equipped with stainless steel barb fitting for extension hose and rotates 360° for ease of installation and sampling.
- The “dual action”, spring loaded safety valve keeps the valve sealed when
unlocked and rotates into a locked position for racing.
- When a fuel sample is required, rotate to the unlocked position, press for fuel sample and release, re-lock the valve and go race.
Aeromotive Billet Fuel Pump Speed Controller
For any pump, on any type of vehicle, the Aeromotive Fuel Pump Speed Controller (FPSC) minimizes fuel heating and vapor-lock problems by matching the duty cycle of the fuel pump to engine RPM. At low demand, the FPSC slows the fuel pump down, reducing the chance of suction side cavitation and vapor lock. When demand increases, the FPSC returns the fuel pump to 100% duty cycle for maximum flow. It’s like an automatic transmission for your fuel pump.
Fuel Pump Voltage Controller Material: Billet aluminum
Fuel Pump Voltage Controller Finish: Black
Switches Included: Yes
Mounting Hardware Included: Yes
Installation Manual Included: Yes
Notes::
- Adjustable, full-speed RPM threshold.
- Complete installation kit includes: wire, override toggle switch, installation hardware, and instructions.
- LED indicators confirm correct ignition signal hookup, verifies activation of the manual override circuit, and indicates when the circuit is providing full voltage to the pump.
- A solid-state transistor circuit, rated up to 40 amps, replaces the relays recommended in most fuel pump electrical circuits.
- Avoid any device that reduces voltage to your fuel pump. Low voltage will destroy a 12V DC motor. The Aeromotive FPSC does not reduce voltage! The FPSC emits a pulse modulation signal that is harmless to the pump’s motor.
Bestsellers
Customer Testimonials
You guys are an example to every Shop! MANY THANKS for all your help!
- Kenneth B of Mosta, Malta...
Read More ->
TOP NOTCH
I can't thank Himni enough for your awesome customer service and technical help. The turbo parts fit perfect. My new favorite turbo shop!
- Chris Y.......
Read More ->
