Himni Racing Polyurethane FD RX-7 Motor Mounts.. Extremely Smooth & no vibrations. The perfect blend for Street & Hard Race use. Backed by over a decade of R&D, we guarantee the Himni Racing RX-7 poly engine mounts to be the very best performance mounts available on the market today. Unlike any other other mounts, HR mounts use an exclusive poly blend to achieve an exact/specific density not otherwise possible with standard 'off the self' polyurethane stock.
Note:: Does Not require the purchase of any extra parts. Installs using both stock aluminum & steel brackets. Or With 2 steel brackets if you have changed from OEM. (select from menu)
Engine Stability: Up to 650 HP (OEM mounts jump around at even 100 HP)
Vibrations to Chases & Driver: No
Limited Life Time Warranty: Yes
- Less engine movement compared to MazdaSpeed competition mounts? Yes
- Fits: 93-00 Mazda FD3S RX-7.
***Effective as of 4/10/2010, HR polyurethane motor mounts are updated to absorb all vibrations** They hold a large amount of HP with no vibrations transmitted to the driver. This is only part of what separates the HR Poly Motor Mounts all others. Over many years, Himni Racing has tested countless configurations, materials & designs to archive the right motor mount balance of Holding The Engine In Place with little to no vibrations transmitted to the chases/driver. This makes the HR Poly Mounts KING. There is no longer any reason to vibrate you & your car in order to hold your engine steady.
Each mount set is machined, then hand tailored. This allows the engine to sit in the bay as it would with the stock mounts, so no other modifications are needed. Bolts into place with basic tools & comes with strong metric 8.8 grade mounting hardware, a decal & installation is very simple. The HR FD 13B-REW rotary engine mounts are the real deal & are found on high performance RX-7's worldwide.
The 'feel' they provide, even under light normal driving, is actually better then new OEM mounts by 10 fold. It's a more precise, realistic & in tune feel with the engine. There's a clean 'blip' feel off idle, then smooth all the way to redline. Good for 650 + WHP. Less then 1/4" of engine movement under full throttle & hard loads. Dyno testing has proved ZERO movement on a 472 WHP car. The new Himni Racing Polyurethane Engine Mount are the best choice to combine smooth operation & extreme engine stability.
Himni Racing is one of the very 1st company's to bring solid & poly motor mounts to the rotary community many, many years ago. This insures that you will get the very best product, from the originators. HIMNI mounts will greatly reduce the engine from "rocking" back & forth in the engine bay. This rock becomes more extreme during spirited driving & racing situations. Our mounts provide a much more potent launch, increased torque & HP transmitted to the wheels & eliminated missed shifts. These can be easily installed in an average of a half hour, without removing the engine.
Comes With & Features:
- Made In The USA
- Himni Racing High Performance Polyurethane Motor Mount Set (Replaces both OEM mounts)
- 8.8 Grade Metric Mounting Hardware
- Good for 650+ WHP
- Smooth with no Vibrations.
- Made In House by the Pros @ HR
- Machined, Then Hand Tailored to Guarantee Perfect Fitment
- Easy Half Hour Installation (engine does not need to be removed)
- Installs using both stock aluminum & steel brackets.
- No Other Parts Required (Direct Bolt on)
- Eliminates the need for an engine torque brace.
- Extremely long life (capable of lasting a lifetime)
- Oil & Chemical Resistant
- Step by Step Installation Instructions
- FREE Rotor Decal
- Superior to new OEM & Mazdaspeed comp. mounts.
Himni Racing SOLID Composite Motor Mounts for the 93-00 FD3S RX-7.. Half the weight of Aluminum but extremely strong. For outright race applications or when vibrations aren't an issue.
Note:: Does Not require the purchase of any extra parts. Installs using both stock aluminum & steel brackets. Or with 2 steel brakets if you have changed from OEM. (select from menu) These mounts are for outright race cars only & are not recommended for street use. If your car is producing 650 HP or less, we recommend the HR Polyurethane Mounts.
- Driving Situations: Race Cars Only (harsh feel)
- Engine Stability: Up to 1000+ HP (OEM mounts jump around at even 120 WHP)
- Vibrations to Body & Driver: YES
- Life Time Warranty: Yes
- Less engine movement compared to MazdaSpeed competition mounts? Yes
- Fits: 93-00 Mazda FD3S RX-7.
Less then half the weight of Aluminum mounts... The Himni Racing SOLID COMP. motor mounts are made of a extremely durable composite materiel that allows them to be very strong at more then half the weight of conventional aluminum mounts. These Solid Comp. RX-7 motor mounts will completely stop ALL engine movement & will hold your engine in place at just about any amount of rotary HP you throw at them.
Each mount set in made to allow the engine to sit in the bay as it would with the stock mounts, so no other modifications are needed. The mounts provide a much more potent launch with increased torque & HP transmitted to the wheels & eliminated missed shifts. Each mount set comes with strong 8.8 grade metric mounting hardware, a decal & installation is very simple. They are easily installed in an average of an hour, without removing the engine. The HR mounts are the real deal & are found on high performance RX-7 race cars worldwide! Can be used on street cars but recommended for outright race use only. (our polyurethane mounts are better suited for street driving)
Comes With & Features:
- Made In The USA
- Himni Racing High Performance Solid Comp. Motor Mount Set (Black)
- 8.8 Grade Metric Mounting Hardware
- Good for 1000+ WHP
- Made In House by the Pros @ Himni Racing
- Machined, Then Hand Tailored to Guarantee Perfect Fitment
- Easy Half Hour Installation (engine does not need to be removed)
- Installs using both stock aluminum & steel brackets.
- No Other Parts Required (Direct Bolt on)
- Eliminates the need for an engine torque brace.
- Extremely long life (capable of lasting a lifetime)
- Oil & Chemical Resistant
- Step by Step Installation Instructions
- FREE Rotor Decal
- Superior to new OEM & Mazdaspeed comp. mounts.
Replaces Front Engine Cover hardware. 93-99 Mazda RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Replaces Lower Intake Manifold hardware. 93-99 Mazda FD3S RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Master engine hardware kit. Replaces most of the engine hardware including:
Upper Intake Manifold
Lower Intake Manifold
Throttle body & elbow
Pulleys & alternator
Front engine cover
Oil Pan
Water Pump & Pump housing
Fits 93-99 Mazda RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Replaces Oil Pan hardware. 93-99 Mazda RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Replaces Pulleys & Alternator hardware. 93-99 Mazda RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Replaces Throttle Body & Elbow hardware. 93-99 Mazda RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Replaces Upper Intake Manifold hardware. 93-99 Mazda RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
Replaces Water Pump & Pump Housing hardware. 93-99 Mazda RX-7 (Twin Turbo 13B-REW) The original HR SS Hardware kits.
You can now replace all your rusted, stripped or crusty 20+ year old hardware with Himni Racing solid stainless steel Nuts, Bolts, Washers, etc. Each kit is complete, application specific replacement with a guaranteed perfect fit each time. Each piece is solid stainless steel, stronger then the factory nuts/ bolts with a bright shine that will not rust & has no coatings to rub off. High quality, they stay looking brand new indefinitely. The factory open end nuts are upgraded to closed end nuts where appropriate (Upper Intake Manifold, Throttle body & Elbow, Water Pump & housing kit, etc) This keeps the exposed stud threads covered, protected from the elements & corrosion. Perfect for old & new engines alike.
For the most part, the HR SS RX-7 hardware kits can be installed without removing the parts or components by simply removing a nut or bolt, then replacing it > moving to the next piece. Kits are available for the majority of the engine & some body including Intakes manifolds, Pulleys, water pump, Throttle body & elbow, alternator, turbo/oil fill tube/ CAS, front engine cover, oil pan, fenders, Accessories such as coils, sensors, & bracket mounts & more.
Be careful of imitators or copies as they can cause more harm then good... Inferior materials, cross threading, damaged threads, stripping, rounding off & ruining parts. The original HR SS Hardware kits are the only way to insure you're getting the best product possible.
Solid Stainless Steel, Will not rust
Stronger & more durable then OEM w/ a bright shine & no coating to rub off.
Application specific replacement w/ a guaranteed perfect fit.
NOTE: NOTE: NOTE: This item is now temporally solid out, out of stock & not available at this time. Please contact sales directly if you need an ETA on availability.
FREE USPS PRIORITY SHIPPING WITHIN THE USA.
The Himni Racing FD Rev2 Expansion Tank is the ideal choice to eliminate the OEM & other aftermarket AST (air separator tank) on the 93+ Mazda FD RX-7. Designed by Paul Himni, the HR Rev2 Expansion Tank supersedes all other remote mount AST layouts with superior overall design & craftsmanship. More efficient coolant/water transfer & air separation makes it perfect for both street & race.
- Made In The USA, in-house by HR.
- Replaces both the factory thermostat housing/water neck & the air separator tank.
- Made entirely of aircraft grade billet aluminum, precision machined & beautifully TIG welded.
- Simple, 100% direct bolt-on.
- Works w/ the factory metric thread water level sensor, overflow tank, large & the small radiator hoses & factory AST cap.
- Reduces unnecessary weight & eliminates all the extra small hose nonsense.
- Compact design allows added clearance for large turbochargers & aggressive turbo placement. (Also clears the Himni Racing FD V3 Alpha line of turbo kits)
- Works with large water pump underdrive & idler pulleys.
- Polished finish with engraved HR logo & rotor on the front.
- Increased water transfer & air separation.
- Durable, lightweight, & built to last. 3 year warranty covers both materials & craftsmanship.
OUT OF STOCK
$319.00This sickest oil catch can!! We love this one with it's very original & effective design. The same catch can found on the Himni Racing Tri-Loaf 20B FD3S.
The Rev.3 billet aluminum oil catch can has a 1" breather filter and dual 1/2" NPT ports for use on both turbo & N/A engines. The large 1/2" NPT ports allow many different fitting combinations to suit your needs. It uses a V-band and O-ring clamp design with integrated stainless V-band clamp bracket. Very trick!
$87.00Minimum order quantity: 4
Used to fasten exhaust manifold/headers TO the engine. High-heat, premium copper clad, exhaust manifold/header to engine block lock nut. These are the same nuts found in the Himni Racing V2 turbos kits. Top lock design holds strong under the most demanding rotary engine conditions but is not prone to seizing like standard stock steel nuts. They hold strong & remove smoothly. They will keep your housing studs in tack for years to come. Busted, removed, stripped or seized studs & housing threads are no longer an issue. Price is per nut. Minimum order quantity is 4.
Below is a quick, off hand fitment for your application.
79-85 FB Mazda RX-7 (Fits both 12A & 13B)
Manifold/Header to Engine: 4 needed
86-92 FC3S Mazda RX-7 (13B 6 port Non-turbo)
Manifold/Header to Engine: 4 needed
87-92 FC3S Mazda RX-7 (13BT 4 port Turbo II)
Turbo Manifold to Engine: 4 needed
Turbocharger to Manifold: 4 needed
Downpipe to Turbocharger: 3 needed
93-99 FD3S Mazda RX-7 (13B-REW Twin Turbo)
Turbo Manifold to Engine: 4 needed
Twin Turbochargers to Manifold: 6 needed
Downpipe to Twin Turbochargers: 4 needed
13B-RE Cosmo Engine (2 rotor, twin turbo)
Turbo Manifold to Engine: 4 needed
20B Cosmo Engine (3 rotor, twin turbo)
Turbo Manifold to Engine: 6 needed
Twin Turbochargers to Manifold: 6 needed
04-09 Mazda RX-8 (2 rotor Renesis)
Manifold/Header to Engine: 6 needed
GReddy hard piping kits either change the soft factory hoses to hard pipes or high capacity replacements that allow for rerouting. Universal kits are available for custom making intercooler compression pipes.
This is the Greddy cast aluminum throttle body elbow for the 93-00 FD3S RX-7. Used to replace the factory plastic unit & allows simple intercooler tubing connections. An ideal solution for properly plumbing your I/C. Bright polished finish.
$175.90GReddy hard piping kits either change the soft factory hoses to hard pipes or high capacity replacements that allow for rerouting. Universal kits are available for custom making intercooler compression pipes.
This is the Greddy cast aluminum throttle body elbow for the 93-00 FD3S RX-7. Used to replace the factory plastic unit & allows simple intercooler tubing connections. An ideal solution for properly plumbing your I/C. Bright polished finish.
$175.90Master engine hardware kit. Replaces mo...
$84.00GReddy hard piping kits either change the soft factory hoses to hard pipes or high capacity replacements that allow for rerouting. Universal kits are available for custom making intercooler compression pipes.
This is the Greddy cast aluminum throttle body elbow for the 93-00 FD3S RX-7. Used to replace the factory plastic unit & allows simple intercooler tubing connections. An ideal solution for properly plumbing your I/C. Bright polished finish.
$175.90Himni Racing Polyurethane FD RX-7 Motor...
$99.90Himni Racing Polyurethane FD RX-7 Motor...
Oh my goodness! Fastest shipping I have ever experienced from the US! Many thanks
- James S. Ontario, Canada...
Read More ->
I can't thank Himni enough for your awesome customer service and technical help. The turbo parts fit perfect. My new favorite turbo shop!
- Chris Y.......
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.