Categories
- Turbochargers
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- -Mazda RX-7 FC3S 86-92
- -Mazda RX-7 FD3S 93-01
- -Brakes
- -Electronics / Engine Management
- -Engine - Rotary
- -Exhaust
- -Fuel System
- -Turbo & Related
- -Shirts/ Decals/ Plugs/ KeyChains
- -BARGAINS/CLEARANCE: NEW & USED
- -Mazda RX-8 2003-2011
- -Mazda / Mazdaspeed 3
- -Mazda / Mazdaspeed 6
- -Bargains / Clearance New & Used
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
English
GReddy BOV Adapter - RX-7 FD3S
This CNC machined flange allows all of the Greddy blow off valves (Type-S, Type-R & Type-RS) to clamp right on to all 93-95 Mazda RX-7's Tricked out 2 piece designed has a 1" inlet to provide a perfect fit and Leak-Free seal. Made of billet aluminum. Slips into place using the stock hose & clamp. Lightweight & allows EZ replacement of the stock BOV.
$27.90
HKS BOV Adapter - RX-7 FD3S
This is a CNC Machined flange that allows the HKS SSQV blow off valve to bolt right on to all 93-95 Mazda RX-7's Tricked out 2 piece designed has a 1" inlet to provide a perfect fit and leak-Free seal. Made of lightweight 6061 T6 billet aluminum. Slips into place using the stock hose & clamp. BOV not included.
$32.90
Turbonetics Raptor BOV Adapter - RX-7 FD3S
This CNC machined flange allows all of the Turbonetics Raptor blow off valve to bolt right on to all 93-95 Mazda RX-7's. Tricked out 2 piece designed has a 1" inlet to provide a perfect fit and Leak-Free seal. Made of billet aluminum. Slips into place using the stock hose & clamp. Lightweight & allows EZ replacement of the stock BOV.
$27.90
TurboSmart Dual Stage Boost Controller
FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
This item is normally in stock & ships with 1-72 hours.
The TurboSmart Duel Stage boost controller is compact design that will fit in the palm of your hand. Plus this unit provides fast boost response with two adjustable boost levels. Just toggle between High and Low on the fly. Ideal for replacing factory boost controllers.
-Low and high Boost settings are fully adjustable
-Detent System for ease of adjustment
-Gated System to bring boost on faster
-Includes Rocket Launcher Switch and fitting hardware
-Mounting bracket and all fittings are supplied
-Can be locked to prevent tampering
-Comes with comprehensive installation instructions
Setting the desired boost pressure is made easy. Simply adjust the Boost Dial on the top of the unit, without the need for any tools. Turbosmart Boost controllers are capable of increasing boost pressure to the threshold of your turbo’s capacity.
Comes Complete With Everything Needed For An Easy Install
- Available in two colors of your choice.
- Blue-(PT# TS-0105-1001) or Black-(PT# TS-0105-1002)
TurboXS Standard Boost Controller
This item is normally in stock & ships with 1-72 hours.
The TurboXS Standard Boost Controller is simple, inexpensive, and effective way to control your boost level and generate more power from your engine. Bleed type boost controller allows you to increase boost approximately 12psi over your wastegate boost setting.
$76.00
Copper Clad Exhaust Lock Nut - RX-7, RX-8, Rotary Engine
Minimum order quantity: 4
Used to fasten exhaust manifold/headers TO the engine. High-heat, premium copper clad, exhaust manifold/header to engine block lock nut. These are the same nuts found in the Himni Racing V2 turbos kits. Top lock design holds strong under the most demanding rotary engine conditions but is not prone to seizing like standard stock steel nuts. They hold strong & remove smoothly. They will keep your housing studs in tack for years to come. Busted, removed, stripped or seized studs & housing threads are no longer an issue. Price is per nut. Minimum order quantity is 4.
Below is a quick, off hand fitment for your application.
79-85 FB Mazda RX-7 (Fits both 12A & 13B)
Manifold/Header to Engine: 4 needed
86-92 FC3S Mazda RX-7 (13B 6 port Non-turbo)
Manifold/Header to Engine: 4 needed
87-92 FC3S Mazda RX-7 (13BT 4 port Turbo II)
Turbo Manifold to Engine: 4 needed
Turbocharger to Manifold: 4 needed
Downpipe to Turbocharger: 3 needed
93-99 FD3S Mazda RX-7 (13B-REW Twin Turbo)
Turbo Manifold to Engine: 4 needed
Twin Turbochargers to Manifold: 6 needed
Downpipe to Twin Turbochargers: 4 needed
13B-RE Cosmo Engine (2 rotor, twin turbo)
Turbo Manifold to Engine: 4 needed
20B Cosmo Engine (3 rotor, twin turbo)
Turbo Manifold to Engine: 6 needed
Twin Turbochargers to Manifold: 6 needed
04-09 Mazda RX-8 (2 rotor Renesis)
Manifold/Header to Engine: 6 needed
GReddy Cast Aluminum Throttle Body Elbow: 93-95 FD Mazda RX-7
GReddy hard piping kits either change the soft factory hoses to hard pipes or high capacity replacements that allow for rerouting. Universal kits are available for custom making intercooler compression pipes.
This is the Greddy cast aluminum throttle body elbow for the 93-00 FD3S RX-7. Used to replace the factory plastic unit & allows simple intercooler tubing connections. An ideal solution for properly plumbing your I/C. Bright polished finish.
$175.90
GT TURBO SS Oil feed Line Kit - Mazda RX-7- (GT25R-GT35R)
Himni Racing SS oil feed line kit for use with Garrett 'GT BALL BEARING SERIES' Turbochargers only. (GT25R-GT35R)
Other kits available for the following turbo configurations are also found in our catalog. Applications for:
- Stock 87-92 Turbo II TurboCharger
- T Series TurboChargers
- Large Garrett GT Series TurboChargers (GT40R-up)
NOTE, pick engine type from menu. We have kits available for the following engines:
Mazda 13BT Turbo II (87-92)
Mazda 13B-REW (93-99)
Mazda 13B-RE (2 rotor Cosmo)
Mazda 20B (3 rotor Cosmo)
The Himni Racing Stainless Steel Braided 'GT SERIES' Mazda RX-7, Turbo Oil Feed Line Kit is for use with many of the popular GT series turbos. (list seen below) Direct bolt-on for all Mazda RX-7's rotary engines. (pick your car / engine from the menu) Our RX-7 oil feed kits are top of the line! The Teflon coated core will insure a long life & superior oil resistance. Kit Includes Everything needed::: -4 SS line with ends, restrictor & all required fittings. Allows you to utilize the stock turbo oil feed port in the front housing & even uses the stock bolt & copper washers. A very clean, leak free fit at any pressure you throw at it. Because a restrictor is included, there's no need to worry about damaging the seals in your Garrett GT Turbo, while still providing it with all the oil it needs. Replaces the whole stock line, quickly and easily.
Works With the following Garrett Turbochargers:
GT25R, GT28R, GT28RS, GT2871R, GT25/40R, GT2876R, GT3071R, GT30R, GT3076R, GT3040R, GT3082R, GT3582R, GT35/40R, GT35R, GT35R T4 & more.
Big GT Turbo SS Oil Feed Line Kit - Mazda RX-7
Himni Racing SS oil feed line kit for use with Large frame Garrett 'GT BALL BEARING SERIES' Turbochargers only. (GT3788R-Up)
Other kits available for the following turbo configurations are also found in our catalog. Applications for:
- Stock 87-92 Turbo II TurboCharger
- T Series TurboChargers
- Mide Sized Garrett GT Series TurboChargers (GT25-GT35R)
NOTE, pick engine type from menu. We have kits available for the following engines:
Mazda 13BT Turbo II (87-92)
Mazda 13B-REW (93-99)
Mazda 13B-RE (2 rotor Cosmo)
Mazda 20B (3 rotor Cosmo)
The Himni Racing Stainless Steel Braided 'BIG GT SERIES' Mazda RX-7, Turbo Oil Feed Line Kit is for use with the Big Garrett GT series turbos. (list seen below) Uses larger .065 restrictor. Direct bolt-on for all Mazda RX-7's rotary engines. (pick your car / engine from the menu) Our RX-7 oil feed kits are top of the line! The Teflon coated core will insure a long life & superior oil resistance. Kit Includes Everything needed::: -4 SS line with ends, restrictor flange, gasket, mounting bolts & all required fittings. Allows you to utilize the stock turbo oil feed port in the front housing & even uses the stock bolt & copper washers. A very clean, leak free fit at any pressure you throw at it. Because a restrictor is included, there's no need to worry about damaging the seals in your Garrett GT Turbo, while still providing it with all the oil it needs. Replaces the whole stock line, quickly and easily.
Works With the following Garrett Turbochargers:
GT3788R, GT40R, GT4088R, GT4094R, GT42R, GT4294R, GT4202R, GT45R, GT47R, etc.
T TURBO SS Oil feed Line Kit - Mazda RX-7
Himni Racing SS oil feed line kit for use with 'T SERIES' Turbochargers only.
Other kits available for the following turbo configurations are also found in our catalog. Applications for:
- Stock 87-92 Turbo II TurboCharger
- Mid Sized Garrett GT Series TurboChargers (GT25-GT35R)
- Large Garrett GT Series TurboChargers (GT40R-up)
NOTE, pick engine type from menu. We have kits available for the following engines:
Mazda 13BT Turbo II (87-92)
Mazda 13B-REW (93-99)
Mazda 13B-RE (2 rotor Cosmo)
Mazda 20B (3 rotor Cosmo)
The Himni Racing Stainless Steel Braided 'T SERIES' Mazda RX-7, Turbo Oil Feed Line Kit is for use with many of the popular T series turbos. Direct bolt-on for all Mazda RX-7's rotary engines. (pick your car / engine from the menu) Our RX-7 oil feed kits are top of the line with a Teflon coated core insures a long life & superior oil resistance. Kit Includes Everything needed::: -4 SS line with ends & all required fittings. Allows you to utilize the stock turbo oil feed port in the front housing & even uses the stock bolt & copper washers. A very clean, leak free fit at any pressure you throw at it. Replaces the whole stock line, quickly and easily.
Note:: Works with Most T Series turbos that have a THREADED oil feed port on the turbo, including: T3, T3/T04, T3/T04E, T3/60-1 T04B, T04E, T04R, T04S, T04Z, T60, T66, T67, 60-1, 62-1, T70, T76, T78, T88, etc.
There are 2 options available for this kit, Select from menu:
- #1 Without Flange. (Select this option if your turbos oil feed port IS threaded)
- #2 WITH Flange. (Select this option if your turbos oil feed port ISN"T threaded. Mounts using threaded holes on each side of the oil feed port) This adds an extra mounting flange, gasket & bolts to kit.
Bestsellers
Customer Testimonials
Oh my goodness! Fastest shipping I have ever experienced from the US! Many thanks
- James S. Ontario, Canada...
Read More ->
TOP NOTCH
I can't thank Himni enough for your awesome customer service and technical help. The turbo parts fit perfect. My new favorite turbo shop!
- Chris Y.......
Read More ->
