FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Russell Brake Caliper Speed Bleeder kit for all 86-91 Mazda FC RX-7 with large 4 Piston front calipers. Complete front & rear speed bleeders directly replaces the factory fittings for all four brakes.
Brand: Russell
Model: Import Brake Speed Bleeder Kit
Position: Front, Rear For Both Left & Right side.
Quantity: Full Kit for all 4 brakes, includes caps.
Fits Front Caliper: 4 Piston only)
Fits Rear Caliper: Single Piston (all)
Application: All 1986-1991 N/A & TurboII Mazda FC RX-7 (S4 & S5) with "Heavy Duty" suspension and 4 piston front calipers.
Sizing: 8mm x 1.0mm X 34mm / 7mm x 1.0mm X 34mm
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
One Person System Takes The Work Out of Brake Bleeding...Bleeding your brake or clutch line has never been easier or simpler. Revolutionary double-patented Speed Bleeder replaces the original bleeder valve in your caliper/wheel cylinder with a spring-loaded one-way ball and check valve design. This unique design opens to allow the old fluid and air out, then closes automatically between pumps to prevent the old fluid and air from re-entering the line.
Note:: The FC technically has 2 bleeder fittings in each rear caliper. Only the top two need to be replaced with speed bleeders.
$44.90FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Russell Brake Caliper Speed Bleeder kit for all 2003-2011 Mazda FE RX-8. Complete front & rear speed bleeders directly replaces the factory fittings for all four brakes.
Brand: Russell
Model: Import Brake Speed Bleeder Kit
Position: Front, Rear For Both Left & Right side.
Quantity: Full Kit for all 4 brakes, includes caps.
Fits Front Caliper: Single Piston
Fits Rear Caliper: Single Piston
Application: 2003-2011 Mazda FE RX-8 (All)
Sizing: 10mm x 1.0mm x 35mm / 8mm x 1.0mm x 34mm
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
One Person System Takes The Work Out of Brake Bleeding... Bleeding your brake or clutch line has never been easier or simpler. Revolutionary double-patented Speed Bleeder replaces the original bleeder valve in your caliper/wheel cylinder with a spring-loaded one-way ball and check valve design. This unique design opens to allow the old fluid and air out, then closes automatically between pumps to prevent the old fluid and air from re-entering the line.
$58.00FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Russell Brake Caliper Speed Bleeder kit for 1993-2001 Mazda FD3S RX-7, All. Complete front & rear speed bleeders directly replaces the factory fittings for all four brakes.
Brand: Russell
Model: Import Brake Speed Bleeder Kit
Position: Front, Rear For Both Left & Right side.
Quantity: Full Kit for all 4 brakes, includes caps.
Fits Front Caliper: 4 Piston
Fits Rear Caliper: Single Piston
Application: All 1993-2001 Twin Turbo Mazda FD RX-7 (S6)
Sizing: 8mm x 1.0mm X 34mm / 7mm x 1.0mm X 34mm
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
One Person System Takes The Work Out of Brake Bleeding... Bleeding your brake or clutch line has never been easier or simpler. Revolutionary double-patented Speed Bleeder replaces the original bleeder valve in your caliper/wheel cylinder with a spring-loaded one-way ball and check valve design. This unique design opens to allow the old fluid and air out, then closes automatically between pumps to prevent the old fluid and air from re-entering the line.
$44.90FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Russell Brake Caliper Speed Bleeder kit for all 78-91 Mazda FB & FC RX-7 with Single Piston front calipers. Complete front & rear speed bleeders directly replaces the factory fittings for all four brakes.
Brand: Russell
Model: Import Brake Speed Bleeder Kit
Position: Front, Rear For Both Left & Right side.
Quantity: Full Kit for all 4 brakes, includes caps.
Fits Front Caliper: Single Piston Only
Fits Rear Caliper: Single Piston (all)
Application: All 1978-1991 N/A Mazda FB & FC RX-7 (Both 4 & 5 lug w/ single piston front calipers)
Sizing: 7mm x 1.0mm X 34mm
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
One Person System Takes The Work Out of Brake Bleeding...Bleeding your brake or clutch line has never been easier or simpler. Revolutionary double-patented Speed Bleeder replaces the original bleeder valve in your caliper/wheel cylinder with a spring-loaded one-way ball and check valve design. This unique design opens to allow the old fluid and air out, then closes automatically between pumps to prevent the old fluid and air from re-entering the line.
Note:: The FC technically has 2 bleeder fittings in each rear caliper. Only the top two need to be replaced with speed bleeders.
$39.00FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Russell Stainless Steel Braided Brake Line kit for all 2003-2011 Mazda FE RX-8. Complete direct bolt on kit replaces the lines for all four brakes.
Brand: Russell
Model: Import Brake Hose Kits
Position: Front, Rear For Both Left & Right side.
Quantity: Full Kit for all 4 brakes, includes hardware.
Fits Caliper: All
Line Construction: Braided stainless steel.
Meets or Exceeds DOT Standards? Yes.
Application: 2003-2011 Mazda FE RX-8 (All)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
Direct bolt-on brake hoses bring the ultimate in braking performance. They improve your braking performance for competition or everyday driving. Replacing the OE rubber hoses with Russell brake hoses reduces brake hose expansion for more consistent braking. Featuring stainless steel braided hose with zincplated fittings, these brake hoses are factory assembled for convenient installation. They meet the guidelines of the U.S. Dept. of Transportation FMVSS-571.106 requirements. All Russell brake hoses kits are for stock applications unless noted otherwise.
$114.95FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Russell Stainless Steel Braided Brake Line kit for all 86-91 Mazda FC RX-7. Complete direct bolt on kit replaces the lines for all four brakes.
Brand: Russell
Model: Import Brake Hose Kits
Position: Front, Rear For Both Left & Right side.
Quantity: Full Kit for all 4 brakes, includes hardware.
Fits Caliper: All
Line Construction: Braided stainless steel.
Meets or Exceeds DOT Standards? Yes.
Application: All 1986-1991 N/A & TurboII Mazda FC RX-7 (S4 & S5)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
Direct bolt-on brake hoses bring the ultimate in braking performance. They improve your braking performance for competition or everyday driving. Replacing the OE rubber hoses with Russell brake hoses reduces brake hose expansion for more consistent braking. Featuring stainless steel braided hose with zincplated fittings, these brake hoses are factory assembled for convenient installation. They meet the guidelines of the U.S. Dept. of Transportation FMVSS-571.106 requirements. All Russell brake hoses kits are for stock applications unless noted otherwise.
$109.95FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Russell Stainless Steel Braided Brake Line kit for all 86-91 Mazda FC RX-7. Complete direct bolt on kit replaces the lines for all four brakes.
Brand: Russell
Model: Import Brake Hose Kits
Position: Front, Rear For Both Left & Right side.
Quantity: Full Kit for all 4 brakes, includes hardware.
Fits Caliper: All
Line Construction: Braided stainless steel.
Meets or Exceeds DOT Standards? Yes.
Application: All 1986-1991 N/A & TurboII Mazda FC RX-7 (S4 & S5)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
Direct bolt-on brake hoses bring the ultimate in braking performance. They improve your braking performance for competition or everyday driving. Replacing the OE rubber hoses with Russell brake hoses reduces brake hose expansion for more consistent braking. Featuring stainless steel braided hose with zincplated fittings, these brake hoses are factory assembled for convenient installation. They meet the guidelines of the U.S. Dept. of Transportation FMVSS-571.106 requirements. All Russell brake hoses kits are for stock applications unless noted otherwise.
$109.95Made in USA. The Himni Racing FC RX7 St...
$215.00FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Russell Stainless Steel Braided Brake Line kit for all 86-91 Mazda FC RX-7. Complete direct bolt on kit replaces the lines for all four brakes.
Brand: Russell
Model: Import Brake Hose Kits
Position: Front, Rear For Both Left & Right side.
Quantity: Full Kit for all 4 brakes, includes hardware.
Fits Caliper: All
Line Construction: Braided stainless steel.
Meets or Exceeds DOT Standards? Yes.
Application: All 1986-1991 N/A & TurboII Mazda FC RX-7 (S4 & S5)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
Direct bolt-on brake hoses bring the ultimate in braking performance. They improve your braking performance for competition or everyday driving. Replacing the OE rubber hoses with Russell brake hoses reduces brake hose expansion for more consistent braking. Featuring stainless steel braided hose with zincplated fittings, these brake hoses are factory assembled for convenient installation. They meet the guidelines of the U.S. Dept. of Transportation FMVSS-571.106 requirements. All Russell brake hoses kits are for stock applications unless noted otherwise.
$109.95Himni Racing Polyurethane FD RX-7 Motor...
$99.90FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Russell Stainless Steel Braided Brake Line kit for all 86-91 Mazda FC RX-7. Complete direct bolt on kit replaces the lines for all four brakes.
Brand: Russell
Model: Import Brake Hose Kits
Position: Front, Rear For Both Left & Right side.
Quantity: Full Kit for all 4 brakes, includes hardware.
Fits Caliper: All
Line Construction: Braided stainless steel.
Meets or Exceeds DOT Standards? Yes.
Application: All 1986-1991 N/A & TurboII Mazda FC RX-7 (S4 & S5)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
Direct bolt-on brake hoses bring the ultimate in braking performance. They improve your braking performance for competition or everyday driving. Replacing the OE rubber hoses with Russell brake hoses reduces brake hose expansion for more consistent braking. Featuring stainless steel braided hose with zincplated fittings, these brake hoses are factory assembled for convenient installation. They meet the guidelines of the U.S. Dept. of Transportation FMVSS-571.106 requirements. All Russell brake hoses kits are for stock applications unless noted otherwise.
$109.95Master engine hardware kit. Replaces mo...
$78.00FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Russell Stainless Steel Braided Brake Line kit for all 86-91 Mazda FC RX-7. Complete direct bolt on kit replaces the lines for all four brakes.
Brand: Russell
Model: Import Brake Hose Kits
Position: Front, Rear For Both Left & Right side.
Quantity: Full Kit for all 4 brakes, includes hardware.
Fits Caliper: All
Line Construction: Braided stainless steel.
Meets or Exceeds DOT Standards? Yes.
Application: All 1986-1991 N/A & TurboII Mazda FC RX-7 (S4 & S5)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
Direct bolt-on brake hoses bring the ultimate in braking performance. They improve your braking performance for competition or everyday driving. Replacing the OE rubber hoses with Russell brake hoses reduces brake hose expansion for more consistent braking. Featuring stainless steel braided hose with zincplated fittings, these brake hoses are factory assembled for convenient installation. They meet the guidelines of the U.S. Dept. of Transportation FMVSS-571.106 requirements. All Russell brake hoses kits are for stock applications unless noted otherwise.
$109.95For use with All small to mid frame Gar...
$78.00FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Russell Stainless Steel Braided Brake Line kit for all 86-91 Mazda FC RX-7. Complete direct bolt on kit replaces the lines for all four brakes.
Brand: Russell
Model: Import Brake Hose Kits
Position: Front, Rear For Both Left & Right side.
Quantity: Full Kit for all 4 brakes, includes hardware.
Fits Caliper: All
Line Construction: Braided stainless steel.
Meets or Exceeds DOT Standards? Yes.
Application: All 1986-1991 N/A & TurboII Mazda FC RX-7 (S4 & S5)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
Direct bolt-on brake hoses bring the ultimate in braking performance. They improve your braking performance for competition or everyday driving. Replacing the OE rubber hoses with Russell brake hoses reduces brake hose expansion for more consistent braking. Featuring stainless steel braided hose with zincplated fittings, these brake hoses are factory assembled for convenient installation. They meet the guidelines of the U.S. Dept. of Transportation FMVSS-571.106 requirements. All Russell brake hoses kits are for stock applications unless noted otherwise.
$109.95Master engine hardware kit. Replaces mo...
$84.00FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Russell Stainless Steel Braided Brake Line kit for all 86-91 Mazda FC RX-7. Complete direct bolt on kit replaces the lines for all four brakes.
Brand: Russell
Model: Import Brake Hose Kits
Position: Front, Rear For Both Left & Right side.
Quantity: Full Kit for all 4 brakes, includes hardware.
Fits Caliper: All
Line Construction: Braided stainless steel.
Meets or Exceeds DOT Standards? Yes.
Application: All 1986-1991 N/A & TurboII Mazda FC RX-7 (S4 & S5)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
Direct bolt-on brake hoses bring the ultimate in braking performance. They improve your braking performance for competition or everyday driving. Replacing the OE rubber hoses with Russell brake hoses reduces brake hose expansion for more consistent braking. Featuring stainless steel braided hose with zincplated fittings, these brake hoses are factory assembled for convenient installation. They meet the guidelines of the U.S. Dept. of Transportation FMVSS-571.106 requirements. All Russell brake hoses kits are for stock applications unless noted otherwise.
$109.95Himni Racing Polyurethane FC RX-7 Motor...
$98.00Himni Racing Polyurethane FD RX-7 Motor...
Himni Racing Polyurethane FC RX-7 Motor...
I can't thank Himni enough for your awesome customer service and technical help. The turbo parts fit perfect. My new favorite turbo shop!
- Chris Y.......
Read More ->
Fast shipping and thoughtfull custoemer service. Laffy taffy happens to be my favorite thanks.
- Alexsandro M. Covington, VA...
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.