Categories
- Turbochargers
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
English
Greddy Airinx Air Intake System - Subaru WRX
This intake is the latest generation of Airinx intakes. Sandwiched between Greddy's new dual chrome ABS spiral cages is a special double-ply element. The element uses 2 layers of 3 dimensional urethane foam (with different textures) to increase the filtration and maximize intake air flow. The outer ply has large opening while the inner rough layer is made up of a fine foam. The outer cage is a spiraled straight-fin design, which helps promote air volume. The chrome finish can dress up any high performance engine compartment. Fits Subaru WRX Turbo
$139.90
GReddy BOV Adapter - RX-7 FD3S
This CNC machined flange allows all of the Greddy blow off valves (Type-S, Type-R & Type-RS) to clamp right on to all 93-95 Mazda RX-7's Tricked out 2 piece designed has a 1" inlet to provide a perfect fit and Leak-Free seal. Made of billet aluminum. Slips into place using the stock hose & clamp. Lightweight & allows EZ replacement of the stock BOV.
$27.90
Greddy Front Mount Intercooler Kit -Subaru WRX
The addition of a GReddy intercooler is an excellent way of safely increasing horsepower. By reducing the engine's inlet temperatures, a denser air charge will enter the engine; this will make more power at the same boost level. Greddy's vehicle specific kits include all the necessary mounts, piping and hoses required to install the kit. All kits are designed to give maximum cooling capacity while allowing for minimal pressure drops. This is achieved by properly sizing the core and tuning the internal core with either a V-spec. core or with a different inner fin pattern in the R-spec core. All cores are an air-to-air, tube and fin design that does not require any specialized liquid plumbing. The end of the cores are capped off with smooth flowing heavy-duty cast aluminum endtanks.
Note: Picture may not reflect actual FMIC package for your vehicle.
$899.90
Greddy High Capacity Oil Pan - 2004-2012 Mazda RX-8
Functional as a secondary oil cooler, GReddy high-capacity Oil Pans, maintain more constant oil temperatures via increased volume of oil and the improved cooling efficiency of the thick-walled cast aluminum construction. They also include specially designed interiors to keep the oil at the oil pump pick-up for engine reliability.
Note: +600cc, cast baffles, turbo oil drain port, Fits Mazda RX-8 Only.
$374.00
Greddy Intercooler Kit - EVO
The addition of a GReddy intercooler is one of the best ways to safely increase horsepower in a turbocharged engine. By reducing the engine's inlet temperatures, a denser air charge will enter the engine; this can make more horsepower at the same boost level and even more power at higher boost levels. Even if there is a factory-installed intercooler, generally these stock units are not ideal even for factory boost levels. They are usually mounted in awkward locations and become very susceptible to heat saturation. They are not ideal for increased boost levels. Our vehicle specific kits include all the necessary mounts, aluminum piping, hoses, and clamps required to install the kit. All kits are designed with specific cores to provide an ideal concession of cooling and flow, with the added benefit of aggressive looks and style. This is achieved by finding an ideal position and configuration for a wide range of boost levels. Our engineers properly size the number of rows in the core and tune the internal core with either a free flowing V-spec. core, our new M-Spec. bar-and-plate core, or our R-Spec core with a different inner fin patterns . The V-spec and R-Spec cores are a lightweight air-to-air, tube and fin design with a highly efficient tube design, which allows smooth ambient flow for optimum heat dissipation and flow to engine cooling systems. Although only offered in very limited sizes, the M-Spec core is an economical compromise that has performance, which lies between the free flowing V-spec. and the extreme cooling potential of the R-Spec. cores. GReddy intercoolers kits offer a great balance of heat exchanging efficiency and flow. The ends of the cores are TIG-welded and capped off with our smooth flowing heavy-duty cast aluminum GReddy endtanks. Lightweight mandrel bent aluminum piping and/or cast aluminum elbows, complete with hose couplers, are used to route air charge smoothly to and from the intercooler.
$1,080.00
GReddy V-Spec Front Mount Intercooler - EVO
GReddy's large design maximizes the opening on the stock bumper as well as aftermarket front bumpers. This front mount is made from a Greddy 24 v-spec core, which is a 2-core, 280 x 600 x 76mm unit. Includes lower piping only.
$785.00
Greddy Water Ppump & Alternator Pulley Kit: 04+ FE Mazda RX-8
Parasitic drag decreases performance. By installing GReddy’s lightweight, blue anodized Duralumin Pulleys for the water pump and alternator, power loses can be kept to a minimum. These kits look good and perform very well. Manufactured with GReddy Logos.
Fits All 2004+ Mazda RX8
$233.60
GReddy Cast Aluminum Throttle Body Elbow: 93-95 FD Mazda RX-7
GReddy hard piping kits either change the soft factory hoses to hard pipes or high capacity replacements that allow for rerouting. Universal kits are available for custom making intercooler compression pipes.
This is the Greddy cast aluminum throttle body elbow for the 93-00 FD3S RX-7. Used to replace the factory plastic unit & allows simple intercooler tubing connections. An ideal solution for properly plumbing your I/C. Bright polished finish.
$175.90
GReddy BOV Adapter - RX-7 FC3S
This CNC machined flange allows all of the Greddy blow off valves (Type-S, Type-R & Type-RS) to clamp right on to all 86-91 Mazda RX-7's Tricked out 2 piece designed has a 1" inlet to provide a perfect fit and Leak-Free seal. Made of billet aluminum. Slips into place using the stock hose & clamp. Lightweight & allows EZ replacement of the stock BOV.
$27.90
GReddy BOV Adapter - RX-7 FC3S
This CNC machined flange allows all of the Greddy blow off valves (Type-S, Type-R & Type-RS) to clamp right on to all 86-91 Mazda RX-7's Tricked out 2 piece designed has a 1" inlet to provide a perfect fit and Leak-Free seal. Made of billet aluminum. Slips into place using the stock hose & clamp. Lightweight & allows EZ replacement of the stock BOV.
$27.90
HR GT Turbo Water / Oil Installation Kit : GT25R - GT35R
For use with All small to mid frame Gar...
$78.00
GReddy BOV Adapter - RX-7 FC3S
This CNC machined flange allows all of the Greddy blow off valves (Type-S, Type-R & Type-RS) to clamp right on to all 86-91 Mazda RX-7's Tricked out 2 piece designed has a 1" inlet to provide a perfect fit and Leak-Free seal. Made of billet aluminum. Slips into place using the stock hose & clamp. Lightweight & allows EZ replacement of the stock BOV.
$27.90
Himni SS Master Engine Nut & Bolt Kit, 87-91 Mazda RX-7
Master engine hardware kit. Replaces mo...
$78.00
GReddy BOV Adapter - RX-7 FC3S
This CNC machined flange allows all of the Greddy blow off valves (Type-S, Type-R & Type-RS) to clamp right on to all 86-91 Mazda RX-7's Tricked out 2 piece designed has a 1" inlet to provide a perfect fit and Leak-Free seal. Made of billet aluminum. Slips into place using the stock hose & clamp. Lightweight & allows EZ replacement of the stock BOV.
$27.90
Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 93-00
Himni Racing Polyurethane FD RX-7 Motor...
$99.90
GReddy BOV Adapter - RX-7 FC3S
This CNC machined flange allows all of the Greddy blow off valves (Type-S, Type-R & Type-RS) to clamp right on to all 86-91 Mazda RX-7's Tricked out 2 piece designed has a 1" inlet to provide a perfect fit and Leak-Free seal. Made of billet aluminum. Slips into place using the stock hose & clamp. Lightweight & allows EZ replacement of the stock BOV.
$27.90
2A Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 86-92
Himni Racing Polyurethane FC RX-7 Motor...
$98.00
GReddy BOV Adapter - RX-7 FC3S
This CNC machined flange allows all of the Greddy blow off valves (Type-S, Type-R & Type-RS) to clamp right on to all 86-91 Mazda RX-7's Tricked out 2 piece designed has a 1" inlet to provide a perfect fit and Leak-Free seal. Made of billet aluminum. Slips into place using the stock hose & clamp. Lightweight & allows EZ replacement of the stock BOV.
$27.90
Himni SS Master Engine Nut & Bolt Kit, 93-99 Mazda RX-7
Master engine hardware kit. Replaces mo...
$84.00
GReddy BOV Adapter - RX-7 FC3S
This CNC machined flange allows all of the Greddy blow off valves (Type-S, Type-R & Type-RS) to clamp right on to all 86-91 Mazda RX-7's Tricked out 2 piece designed has a 1" inlet to provide a perfect fit and Leak-Free seal. Made of billet aluminum. Slips into place using the stock hose & clamp. Lightweight & allows EZ replacement of the stock BOV.
$27.90
86-91 Mazda FC RX-7 SS Braided Oil Cooler Line/Hose Kit
Made in USA. The Himni Racing FC RX7 St...
$215.00Featured Products
Himni Racing Polyurethane FD RX-7 Motor...
Himni Racing Polyurethane FC RX-7 Motor...
Bestsellers
Customer Testimonials
Oh my goodness! Fastest shipping I have ever experienced from the US! Many thanks
- James S. Ontario, Canada...
Read More ->
Service Can't Be Beat!!
Hands down, best supplier of parts ANYWHERE...PERIOD. Fast service and very knowledgeable staff helped our build and continues to be a resource when......
Read More ->
LATEST PRODUCTS
Garrett 40mm GVW-40 External Wastegate K...
-
Garrett 40mm GVW-40 External Wastegate K...
EXTRAS
SUPPORTS
© Copyright 2005-2023 Himni Racing. All Rights Reserved.