Bolt on flange kit allows TurboXS blow off valves to easily bolt right on to the Subaru WRX. No welding needed Retail: $69.00 Note:: Picture may not be of actual item.
$43.20The TurboXS Hard Pipe Kit offers improved airflow, quicker boost response, and higher boost pressure at redline compared to the restrictive and turbulent OEM rubber pipes. In addition to all the performance benefits, each pipe is hand-polished to a mirror finish for a show quality look.
Each kit includes all necessary silicone couplers and stainless steel T-bolt clamps. And unlike other manufacturer’s hard pipe kits that require you to purchase a smaller battery, the TurboXS EVO FMIC Hard Pipe Kit uses precision mandrel bent pipes that allow you to keep your OEM battery. No expensive “battery upgrade kit” necessary! Additionally, the kit can be installed with a variety of intakes including the factory airbox, the TurboXS EVO8-Intake, the HKS EVO8 intake, and similar intakes. This kit fits all models of the EVO 8 and EVO9 including the MR and the RS models.
$400.00TurboXS front mount intercooler for the EVO VIII, MR and RS. Huge bolt on replacement core that is 3.5" x 11.75" x 24" dwarfing the stock core. The bar and plate core design dramatically improves cooling efficiency over the stock tube and fin design. The kit utilizes the factory IC piping or any aftermarket IC pipe kit that works with the stock core. This kit includes Stainless Steel T-bolt clamps, silicone hose joiners, mounting brackets and all hardware needed for easy fitment. No cutting is necessary.
$530.00TurboXS releases the first Hybrid Blow Off Valve designed specifically tuned for the Mazdaspeed 3 & 6. The valve features an innovative re-circulation and vent to atmosphere operation. It has been tuned to offer the best blend of vent to atmosphere and re-circulation without check engines lights, stumbling or the dreaded back fire issues that are commonly associated with Blow OFF Valves and turbocharged cars that use Mass Air Flow configurations. Each kit will bolt directly to your Mazdaspeed without any additional parts.
$208.12TurboXS Oil Catch Can provides turbochargers with front-line protection from the harmful effects of airborne oil vapor, and helps prevent oil and sludge buildup throughout the air intake system. A very high quality unit. Machined & Anodized billet aluminum. Comes with everything needed to install. Silicone hose, mounting hardware, etc. Universal fitment.
Special Order Item takes 3-14 days to ship.
$121.00The TXS cat-back adapter allows you to use our 3 inch Bellmouth design downpipe with any cat-back exhaust system.
$119.00TurboXS RX8 Cat-Back is a high performance 304 Stainless steel solution providing increased flow without the annoying drone associated with performance exhaust systems. This is due to the Tuned chambers and vehicle specific muffler materials. Exhaust gases exit through dual 4.0 inch tips to unleash the beast within on your RX-8.
Revision:
-Turbo XS changed the Tips to a slash cut style which accentuates the lines of the rear bumper fascia.
-Tips were also extended to reduce hot spot when used with the racepipe
-All pipes were polished to a mirror like show car finish. Special order item.
The TurboXS uppipe replaces the factory uppipe connecting the exhaust header to the turbo. New design is all 304 stainless steel and utilizes a high pressure/high temperature flex joint for easy installation. New studs included.
$170.00This item is normally in stock & ships with 1-72 hours.
The TurboXS Dual Stage Boost Controller allows you to switch between two preset boost levels with the flip of a switch from inside the car. Got a high horsepower Front Wheel Drive turbocharged car that can't get off the line? Use the BC-DSBC to launch the car with low boost than switch to the second stage higher boost level for maximum top end power.
The kit includes:
Dual Stage Boost Controller & Mounting Bracket
Electrical Plug and Wiring Loom
6mm Pressure Hose
Control Switch
Necessary Installation Accessories
It can be used on vehicles with internal and external waste gate systems and on vehicles fitted with factory electronic boost control systems. (Electronic boost controllers must be disabled.)
$187.90Brand new front mount intercooler for your 2002-2005 Subaru WRX and STI is now available from TurboXS. Very affordable and efficient for your high horsepower cars. This front mount is much larger then the original TXS kit. It bolts on with no cutting except to fit the front bumper. In additional this new FMIC includes a TurboXS blow off valve.
The intercooler kit does require a short ram intake which can be purchased from us.
The TurboXS Subaru WRX and STI front mount intercooler kit includes:
-Front Mount Intercooler Core
-Front Bumper Support Beam
-Intercooler Piping Kit
-T bolt Clamps
-Radiator Overflow Bottle
-TXS RBV34 By Pass Valve
-Fuel Line Hose
Fits: 02-05 WRX & STi
The TurboXS RX8 High Flow Cat is a great alternative to running a completely catless exhaust. They use a 200 cell metal matrix cat for high exhaust flow and to compliment the exhaust tone with add a resonator to help lower the exhaust noise and keep the db levels down while maintaining high exhaust gas velocity. Perfect when combined with the TurboXS exhaust system. Special order item.
$326.00This item is normally in stock & ships with 1-72 hours.
The TurboXS HP BC utilizes a uniquely engineered ball/spring mechanism combine with an adjustable bleed valve. the BC-HPBC allows you to spool your turbo to full boost up to hundreds of RPM faster than stock. The adjustable bleed mechanism lets you minimize the massive boost "spike" that can occur with poorly designed ball/spring manual boost controllers.
$115.00This item is normally in stock & ships with 1-72 hours.
The TurboXS High Performance Dual Stage Boost controller provides the ultimate in dual stage boost control. Two preset boost levels allow you to switch from "street" to "race" boost with the flip of a switch from inside the cabin - even while under full boost. The first stage includes an adjustable ball/spring boost controller that help you to get to full boost quicker.
The kit includes:
High Performance Dual Stage Boost Controller & Mounting Bracket
Electrical Plug and Wiring Loom
6mm Pressure Hose
Control Switch
Necessary Installation Accessories
Short ram intake include billet aluminum MAF adapter, K&N pod filter, and mounting bracket. The TurboXS intake is engineered to maintain the correct mass air flow sensor signal leading avoiding some of the problems associated with running improperly designed intakes.
$143.00The TurboXS Mazdaspeed3 Cat-Back exhaust is made from 3 inch T304 Stainless Steel. Each bend is mandrel bent to allow smooth exhaust flow. Thick CNC flanges are used to keep all gasket mating surfaces tight and leak free. The exhaust gases flow through our dual resonated pipes and exit through a 5 inch slash cut tip that gives your car the JDM look to match the beastly sound from within.
$510.00A 3" straight through design unleashes all the power your engine can make. Unique flange design allows the RMA-TI to be bolted directly to either the factory mid-pipe.
$374.00This item is normally in stock & ships with 1-72 hours.
The TurboXS Standard Boost Controller is simple, inexpensive, and effective way to control your boost level and generate more power from your engine. Bleed type boost controller allows you to increase boost approximately 12psi over your wastegate boost setting.
$76.00The TXS TMIC for the Subaru Forester XT utilizes the same core as our highly regarded WRX TMIC. However, we have modified the mounting system to allow installation into the Forester XT. The much larger core volume reduces the pressure drop across the IC while the bar and plate core design improves the cooling efficiency. Comes complete with replacement silicone Y piece and stainless steel T-bolt clamps.
NOTE: WRX TMIC shown in picture. FXT model is same core with slightly different Silicone Y-piece.
$750.00Utilizing the largest bar and plate core we could fit under the hood, the TXS TMIC is over 2 times the volume of the stock TMIC. The larger volume reduces the pressure drop across the IC while the bar and plate core design improves the cooling efficiency. Comes complete with replacement silicone Y piece and stainless steel T-bolt clamps.
$721.00When massive flow and cooling is needed, the Turbo XS Front Mount Intercooler delivers. Dwarfing the factory IC core volume by more than 3.3 times, the TurboXS Front Mount Intercooler bar and plate core is larger AND less restictive at high flow rates resulting in better cooling performance.
NOTE: A Short Ram is required to install the WS-FMIC.
The Kit Includes:
Front Mount Intercooler Core
Front Bumper Support Beam
Intercooler Piping Kit
Silicone Couplers
Stainless Steel T bolt Clamps
Radiator Overflow Bottle
TXS RBV34 Bypass Valve
Fuel Line Hose
TurboXS_ WRX/STI Turboback Titanium : T304 Stainless 4 inch Bell Mouth Full 3inch Mandrel Bends Polished Muffler w/Titanium 4 inch tip
Kit includes; -Downpipe (4 inch) -Cat Pipe or Race Pipe (3 inch) -Mid Pipe (3 inch) -Muffler (2.5 inch standard, 3 inch Titanium)
$1,159.00Direct replacement for factory hose. Made of high temp silicone. Eliminates restriction in factory hose.
$85.00Direct replacement for factory hose. Made of high temp silicone. Eliminates restriction in factory hose.
$85.00Direct replacement for factory hose. Made of high temp silicone. Eliminates restriction in factory hose.
$85.00Garrett 40mm GVW-40 External Wastegate ...
$317.00Direct replacement for factory hose. Made of high temp silicone. Eliminates restriction in factory hose.
$85.00Direct replacement for factory hose. Made of high temp silicone. Eliminates restriction in factory hose.
$85.00Direct replacement for factory hose. Made of high temp silicone. Eliminates restriction in factory hose.
$85.00Made in USA. The Himni Racing FC RX7 St...
$215.00Direct replacement for factory hose. Made of high temp silicone. Eliminates restriction in factory hose.
$85.00Master engine hardware kit. Replaces mo...
$78.00Direct replacement for factory hose. Made of high temp silicone. Eliminates restriction in factory hose.
$85.00Master engine hardware kit. Replaces mo...
$84.00Direct replacement for factory hose. Made of high temp silicone. Eliminates restriction in factory hose.
$85.00Himni Racing Polyurethane FD RX-7 Motor...
$99.90Direct replacement for factory hose. Made of high temp silicone. Eliminates restriction in factory hose.
$85.00For use with All small to mid frame Gar...
$78.00Direct replacement for factory hose. Made of high temp silicone. Eliminates restriction in factory hose.
$85.00Himni Racing Polyurethane FC RX-7 Motor...
$98.00Himni Racing Polyurethane FD RX-7 Motor...
Himni Racing Polyurethane FC RX-7 Motor...
You guys are an example to every Shop! MANY THANKS for all your help!
- Kenneth B of Mosta, Malta...
Read More ->
Hands down, best supplier of parts ANYWHERE...PERIOD. Fast service and very knowledgeable staff helped our build and continues to be a resource when......
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.