Made In The USA::
2" stainless steel v-band clamp for use with our 2" V-band flange and any other 2" v-band flange with 3.00" outer diameter (OD) face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
Most commonly used with v-band flange part number R15S242
$17.90Made In The USA::
2.50" stainless steel v-band clamp for use with our 2.50" V-band flange and any other 2.50" v-band flange with an OD of 3.00" diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$18.90Made In The USA
3.00" stainless steel v-band clamp for use with our 3.00" V-band flange and any other 3.00" v-band flange with an OD of 3 5/8" - 3 3/4" diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
Fits: 3" V-band flanges with a sealing surface side outer diameter (OD) of 3.62"-3.75" (3 5/8 inch 92mm - 3 3/4 inch - 95mm)
$18.90Made In The USA
3.50" stainless steel v-band clamp for use with our 3.50" V-band flange and any other 3.50" v-band flange with an OD of 4.25" O.D. (108mm) diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$24.00Made In The USA
4.00" stainless steel v-band clamp for use with our 4.00" V-band flange and any other 4.00" v-band flange with an OD of 4.62"- 4.75" diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$24.00Made In The USA
5.00" stainless steel v-band clamp for use with our 5.00" V-band flange and any other 5.00" v-band flange with an OD of 5 1/8" O.D. (130.9mm) diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$21.50Made in The USA. High quality Clampco 2.00" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 2.25" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 2.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 2.75" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 3.00" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 3.25" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 3.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 3.75" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 4.00" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 4.25" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 4.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Garrett 40mm GVW-40 External Wastegate ...
$317.00Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Himni Racing Polyurethane FC RX-7 Motor...
$98.00Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Made in USA. The Himni Racing FC RX7 St...
$215.00Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Himni Racing Polyurethane FD RX-7 Motor...
$99.90Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Master engine hardware kit. Replaces mo...
$84.00Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90Master engine hardware kit. Replaces mo...
$78.00Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90For use with All small to mid frame Gar...
$78.00Himni Racing Polyurethane FC RX-7 Motor...
Himni Racing Polyurethane FD RX-7 Motor...
Oh my goodness! Fastest shipping I have ever experienced from the US! Many thanks
- James S. Ontario, Canada...
Read More ->
I called and placed my order over the phone. I had a bunch of questions and the lady was kind and very helpful. She made sure I got all the right......
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.