Categories
- Turbochargers
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
English
2.00 " T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 2.00" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
2.25 " T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 2.25" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
2.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 2.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
2.75" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 2.75" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
3.00" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 3.00" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
3.25" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 3.25" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
3.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 3.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
3.75" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 3.75" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
4.00" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 4.00" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
4.25" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 4.25" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
4.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 4.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
5.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
2" V-Band Turbo Exhaust Clamp - Stainless Steel
Made In The USA::
2" stainless steel v-band clamp for use with our 2" V-band flange and any other 2" v-band flange with 3.00" outer diameter (OD) face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
Most commonly used with v-band flange part number R15S242
$17.90
2.5" V-Band Turbo Exhaust Clamp - Stainless Steel
Made In The USA::
2.50" stainless steel v-band clamp for use with our 2.50" V-band flange and any other 2.50" v-band flange with an OD of 3.00" diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$18.90
3" V-Band Turbo Exhaust Clamp - Stainless Steel
Made In The USA
3.00" stainless steel v-band clamp for use with our 3.00" V-band flange and any other 3.00" v-band flange with an OD of 3 5/8" - 3 3/4" diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
Fits: 3" V-band flanges with a sealing surface side outer diameter (OD) of 3.62"-3.75" (3 5/8 inch 92mm - 3 3/4 inch - 95mm)
$18.90
5.00" V-Band Turbo Exhaust Clamp - Stainless Steel
Made In The USA
5.00" stainless steel v-band clamp for use with our 5.00" V-band flange and any other 5.00" v-band flange with an OD of 5 1/8" O.D. (130.9mm) diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$21.50
3.50" V-Band Turbo Exhaust Clamp - Stainless Steel
Made In The USA
3.50" stainless steel v-band clamp for use with our 3.50" V-band flange and any other 3.50" v-band flange with an OD of 4.25" O.D. (108mm) diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$24.00
4" V-Band Turbo Exhaust Clamp 4.62"- 4.75" OD Stainless Steel
Made In The USA
4.00" stainless steel v-band clamp for use with our 4.00" V-band flange and any other 4.00" v-band flange with an OD of 4.62"- 4.75" diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$24.00
4" V-Band Turbo Exhaust Clamp 4.62"- 4.75" OD Stainless Steel
Made In The USA
4.00" stainless steel v-band clamp for use with our 4.00" V-band flange and any other 4.00" v-band flange with an OD of 4.62"- 4.75" diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$24.00
Himni SS Master Engine Nut & Bolt Kit, 93-99 Mazda RX-7
Master engine hardware kit. Replaces mo...
$84.00
4" V-Band Turbo Exhaust Clamp 4.62"- 4.75" OD Stainless Steel
Made In The USA
4.00" stainless steel v-band clamp for use with our 4.00" V-band flange and any other 4.00" v-band flange with an OD of 4.62"- 4.75" diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$24.00
Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 93-00
Himni Racing Polyurethane FD RX-7 Motor...
$99.90
4" V-Band Turbo Exhaust Clamp 4.62"- 4.75" OD Stainless Steel
Made In The USA
4.00" stainless steel v-band clamp for use with our 4.00" V-band flange and any other 4.00" v-band flange with an OD of 4.62"- 4.75" diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$24.00
Himni SS Master Engine Nut & Bolt Kit, 87-91 Mazda RX-7
Master engine hardware kit. Replaces mo...
$78.00
4" V-Band Turbo Exhaust Clamp 4.62"- 4.75" OD Stainless Steel
Made In The USA
4.00" stainless steel v-band clamp for use with our 4.00" V-band flange and any other 4.00" v-band flange with an OD of 4.62"- 4.75" diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$24.00
86-91 Mazda FC RX-7 SS Braided Oil Cooler Line/Hose Kit
Made in USA. The Himni Racing FC RX7 St...
$215.00
4" V-Band Turbo Exhaust Clamp 4.62"- 4.75" OD Stainless Steel
Made In The USA
4.00" stainless steel v-band clamp for use with our 4.00" V-band flange and any other 4.00" v-band flange with an OD of 4.62"- 4.75" diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$24.00
2A Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 86-92
Himni Racing Polyurethane FC RX-7 Motor...
$98.00
4" V-Band Turbo Exhaust Clamp 4.62"- 4.75" OD Stainless Steel
Made In The USA
4.00" stainless steel v-band clamp for use with our 4.00" V-band flange and any other 4.00" v-band flange with an OD of 4.62"- 4.75" diameter face/seal side. Extremely high quality & durable. Comes with high heat lock nut. Ideal for matting a v-band flanged downpipe to a v-band turbine housings to V-band to V-band connection. Very strong clamp that withstands high heat without loosing its hold.
$24.00
HR GT Turbo Water / Oil Installation Kit : GT25R - GT35R
For use with All small to mid frame Gar...
$78.00Featured Products
Himni Racing Polyurethane FD RX-7 Motor...
Himni Racing Polyurethane FC RX-7 Motor...
Bestsellers
Customer Testimonials
Hands down, best supplier of parts ANYWHERE...PERIOD. Fast service and very knowledgeable staff helped our build and continues to be a resource when......
Read More ->
Perfect
THANK YOU FOR THE EXTREMELY FAST SHIPPING!! HIMNI RACING HAS GREAT PRODUCTS!!
-Eric G. Cape Coral, FL...
Read More ->
LATEST PRODUCTS
Garrett 40mm GVW-40 External Wastegate K...
-
Garrett 40mm GVW-40 External Wastegate K...
EXTRAS
SUPPORTS
© Copyright 2005-2023 Himni Racing. All Rights Reserved.