EnglishExample: S480SX
S = S Generation or S Series (T series, GT series, S series)
4 = 400 Frame Size / Model
80 = Compressor Wheel Inducer Size In millimeters (mm)
X = The highest performance, Race Built Unit
S480SX (aka S480, S480S, S400SX4)
Categories
- Turbochargers
- -AirWerks BorgWarner S Series
- -Borg Warner EFR Series
- -Garrett GT Dual Ball Bearing
- -Garrett GTW Series
- -Garrett GTX-R Dual BB Billet
- -Garrett GT Journal Bearing
- -Garrett T Series Journal Bearing
- -Garrett T Series Ball Bearing
- -Vehicle Specific Turbo Kits
- -Garrett GT Ball Bearing CHRA's
- -Compressor & Turbine Wheels
- -Garrett Compressor Housings
- -Garrett Turbine Housings
- -TiAL SS Turbine Housings
- -Other Turbo Accessories
- -Garrett Drag Race Turbo Sheet
- -Turbo Compressor & Turbine Maps
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
There are currently no product reviews.
Newsletter
Subscribe to our newsletter for periodic updates and valuable coupons.
Made In USA
Himni Racing is your source for all AirWerks & BorgWarner turbos! AirWerks is the high performance turbo division of BorgWarner turbo systems. The 'S' Series AirWerks turbos are specifically designed for high performance & race applications. The S series turbos are defined in size & type, 1st by it's model frame size. (i.e. S200, S300, S400 etc) And 2nd by the compressor wheel inducer size. (i.e. S256, S366, S480) In some cases, the suffix "X" is added to distinguish that it's a Race Built turbo charger bread for the highest performance.
Product Image
Item Name+
Price
3" Cat Delete RacePipe - EVO X, 10 (Straight Version)
Racepipe V 2.0, cat delete for EVO X (E...
Price: $149.00
3" Divorced Stainless Downpipe & Cat Delete -2008+ EVO X 10
Divorced 3" stainless O2 housing, downp...
Price: $315.00
3" Stainless Steel Midpipe for EVO X (10) 2008+
3" stainless steel mid-pipe for 2008 an...
Price: $232.00
High Flow 3" Compressor INLET Pipe Set (meets with airbox) EVO X
High flow compressor 3" inlet pipe set ...
Price: $220.00
High Flow Compressor OUTLET Pipe for Evo X Turbo
High flow compressor outlet pipe for Ev...
Price: $93.99
Intercooler End Tank - 12" x 3" x 3" In/Out #2
Made In The USA. A very nice high quali...
Price: $74.90
Intercooler End Tank - 12" x 3"x 3" In/Out #1
Made In The USA. A very nice high quali...
Price: $74.90
Intercooler End Tank - 12" x 3.5"x 3" In/Out #1
Made In The USA. A very nice high quali...
Price: $74.90
Intercooler End Tank - 12" x 3.5"x 3" In/Out #2
Made In The USA. A very nice high quali...
Price: $74.90
Intercooler End Tank Blank - 12" Tall x 3" Wide
Made In The USA. High quality USA made ...
Price: $64.90
Intercooler End Tank Blank - 12" Tall x 3.5" Wide
Made In The USA. High quality USA made ...
Price: $64.90
Intercooler End Tank Blank - 12" Tall x 4.5" Wide
Made In The USA. High quality USA made ...
Price: $64.90
T3 Internal Wastegate SwingValve - V-Band TO 5 Bolt Mercedes
Internal wastegate Swingvalve for large...
Price: $147.00
T3 T3/T4 Intenal Wastegate SwingValve - 5-Bolt to 4-Bolt
Internal wastegate housing w/ Swingvalv...
Price: $78.50
T3 T3/T4 Internal Wastegate w/ Actuator 5 Bolt To 3 Bolt
Complete internal wastegate assembly as...
Price: $221.00
T3 T3/T4 Internal Wastegate w/ Actuator 5 Bolt To 3 Bolt
Complete internal wastegate assembly as shown in the picture above. It includes the internal wastegate housing with pre-assembled swing valve, adjustable , and a machined mounting bracket for the actuator.
Made in the USA & Fits all Turbochargers With T3 5-bolt (ford style) Turbine Housing. Your pick of 7 psi, 14 psi or 22 psi actuator.
Fits turbos such as:
T3, T3/T4, GT28RS, GT2871R, GT30R, GT3071R, GT3076R, GT25/40R, GT35R, etc.
This internal wastegate bolts to the turbo using the 5 mounting holes. The down pipe is attached to the wastegate assembly with the 3 mounting holes on the other side. Boost pressure is easily adjustable via the adjustable arm on the actuator. The included actuator mounting bracket allows for fitment to most turbos.
Comes Complete with:
---T3 5-bolt internal wastegate housing & Swing Valve
---Boost Adjustable actuator
---Mounting Bracket
3-bolt downpipe flanges to fit this internal wastegate are also available on our site.
$221.00
Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 93-00
Himni Racing Polyurethane FD RX-7 Motor...
$99.90
T3 T3/T4 Internal Wastegate w/ Actuator 5 Bolt To 3 Bolt
Complete internal wastegate assembly as shown in the picture above. It includes the internal wastegate housing with pre-assembled swing valve, adjustable , and a machined mounting bracket for the actuator.
Made in the USA & Fits all Turbochargers With T3 5-bolt (ford style) Turbine Housing. Your pick of 7 psi, 14 psi or 22 psi actuator.
Fits turbos such as:
T3, T3/T4, GT28RS, GT2871R, GT30R, GT3071R, GT3076R, GT25/40R, GT35R, etc.
This internal wastegate bolts to the turbo using the 5 mounting holes. The down pipe is attached to the wastegate assembly with the 3 mounting holes on the other side. Boost pressure is easily adjustable via the adjustable arm on the actuator. The included actuator mounting bracket allows for fitment to most turbos.
Comes Complete with:
---T3 5-bolt internal wastegate housing & Swing Valve
---Boost Adjustable actuator
---Mounting Bracket
3-bolt downpipe flanges to fit this internal wastegate are also available on our site.
$221.00
Himni SS Master Engine Nut & Bolt Kit, 93-99 Mazda RX-7
Master engine hardware kit. Replaces mo...
$84.00
T3 T3/T4 Internal Wastegate w/ Actuator 5 Bolt To 3 Bolt
Complete internal wastegate assembly as shown in the picture above. It includes the internal wastegate housing with pre-assembled swing valve, adjustable , and a machined mounting bracket for the actuator.
Made in the USA & Fits all Turbochargers With T3 5-bolt (ford style) Turbine Housing. Your pick of 7 psi, 14 psi or 22 psi actuator.
Fits turbos such as:
T3, T3/T4, GT28RS, GT2871R, GT30R, GT3071R, GT3076R, GT25/40R, GT35R, etc.
This internal wastegate bolts to the turbo using the 5 mounting holes. The down pipe is attached to the wastegate assembly with the 3 mounting holes on the other side. Boost pressure is easily adjustable via the adjustable arm on the actuator. The included actuator mounting bracket allows for fitment to most turbos.
Comes Complete with:
---T3 5-bolt internal wastegate housing & Swing Valve
---Boost Adjustable actuator
---Mounting Bracket
3-bolt downpipe flanges to fit this internal wastegate are also available on our site.
$221.00
HR GT Turbo Water / Oil Installation Kit : GT25R - GT35R
For use with All small to mid frame Gar...
$78.00
T3 T3/T4 Internal Wastegate w/ Actuator 5 Bolt To 3 Bolt
Complete internal wastegate assembly as shown in the picture above. It includes the internal wastegate housing with pre-assembled swing valve, adjustable , and a machined mounting bracket for the actuator.
Made in the USA & Fits all Turbochargers With T3 5-bolt (ford style) Turbine Housing. Your pick of 7 psi, 14 psi or 22 psi actuator.
Fits turbos such as:
T3, T3/T4, GT28RS, GT2871R, GT30R, GT3071R, GT3076R, GT25/40R, GT35R, etc.
This internal wastegate bolts to the turbo using the 5 mounting holes. The down pipe is attached to the wastegate assembly with the 3 mounting holes on the other side. Boost pressure is easily adjustable via the adjustable arm on the actuator. The included actuator mounting bracket allows for fitment to most turbos.
Comes Complete with:
---T3 5-bolt internal wastegate housing & Swing Valve
---Boost Adjustable actuator
---Mounting Bracket
3-bolt downpipe flanges to fit this internal wastegate are also available on our site.
$221.00
86-91 Mazda FC RX-7 SS Braided Oil Cooler Line/Hose Kit
Made in USA. The Himni Racing FC RX7 St...
$215.00
T3 T3/T4 Internal Wastegate w/ Actuator 5 Bolt To 3 Bolt
Complete internal wastegate assembly as shown in the picture above. It includes the internal wastegate housing with pre-assembled swing valve, adjustable , and a machined mounting bracket for the actuator.
Made in the USA & Fits all Turbochargers With T3 5-bolt (ford style) Turbine Housing. Your pick of 7 psi, 14 psi or 22 psi actuator.
Fits turbos such as:
T3, T3/T4, GT28RS, GT2871R, GT30R, GT3071R, GT3076R, GT25/40R, GT35R, etc.
This internal wastegate bolts to the turbo using the 5 mounting holes. The down pipe is attached to the wastegate assembly with the 3 mounting holes on the other side. Boost pressure is easily adjustable via the adjustable arm on the actuator. The included actuator mounting bracket allows for fitment to most turbos.
Comes Complete with:
---T3 5-bolt internal wastegate housing & Swing Valve
---Boost Adjustable actuator
---Mounting Bracket
3-bolt downpipe flanges to fit this internal wastegate are also available on our site.
$221.00
Himni SS Master Engine Nut & Bolt Kit, 87-91 Mazda RX-7
Master engine hardware kit. Replaces mo...
$78.00
T3 T3/T4 Internal Wastegate w/ Actuator 5 Bolt To 3 Bolt
Complete internal wastegate assembly as shown in the picture above. It includes the internal wastegate housing with pre-assembled swing valve, adjustable , and a machined mounting bracket for the actuator.
Made in the USA & Fits all Turbochargers With T3 5-bolt (ford style) Turbine Housing. Your pick of 7 psi, 14 psi or 22 psi actuator.
Fits turbos such as:
T3, T3/T4, GT28RS, GT2871R, GT30R, GT3071R, GT3076R, GT25/40R, GT35R, etc.
This internal wastegate bolts to the turbo using the 5 mounting holes. The down pipe is attached to the wastegate assembly with the 3 mounting holes on the other side. Boost pressure is easily adjustable via the adjustable arm on the actuator. The included actuator mounting bracket allows for fitment to most turbos.
Comes Complete with:
---T3 5-bolt internal wastegate housing & Swing Valve
---Boost Adjustable actuator
---Mounting Bracket
3-bolt downpipe flanges to fit this internal wastegate are also available on our site.
$221.00
2A Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 86-92
Himni Racing Polyurethane FC RX-7 Motor...
$98.00Featured Products - Turbochargers
Himni Racing Polyurethane FD RX-7 Motor...
Himni Racing Polyurethane FC RX-7 Motor...
Bestsellers
Customer Testimonials
AWESOME SHOP
Already in my hands!
I LOVED THE SERVICE YOU GUYS GAVE ME WITH MY NEW WASTE GATE! TRULY HELPFUL AND GENEROUS. LOOK FORWARD TO BUYING MORE.
- Sheryl P. CasulA, Australia...
Read More ->
Already in my hands!
Oh my goodness! Fastest shipping I have ever experienced from the US! Many thanks
- James S. Ontario, Canada...
Read More ->
LATEST PRODUCTS
Garrett 40mm GVW-40 External Wastegate K...
-
Garrett 40mm GVW-40 External Wastegate K...
EXTRAS
SUPPORTS
© Copyright 2005-2023 Himni Racing. All Rights Reserved.