T3 3.00" V-Band Divided .78 A/R Turbine Housing - GT Turbos

This is T3 divided (twin scroll) turbine/exhaust housing with 3.00" V-band outlet. (Downpipe side) Please pick what turbo it's for, from the menu before adding to cart. ***Read Below***

The "GT30R Family" menu selection is for the following turbos:
GT30R, GT3071R, GT3076R, GT3040R, GT3082R (using the full 60mm, 84 trim turbine wheel)

The "GT35R Family" menu selection is for the following turbo:
GT35R, GT3040R, GT3582R (using the full 68mm, 84 trim turbine wheel)

Installing & replacing your turbine housing is very simple. Once the turbo is removed from the car, the new housing is installed by simply removing the (6) 1/2" mounting bolts holding the turbine housing to the center cartridge. The old housing then slips right off & the new housing goes back on in the reverse order. Some applications do not require that the whole turbo even be removed from the car depending on available space & leverage. This is a 1 out of 10 in difficulty.

Turbine housings are often changed or replaced for various reasons such as:
- To allow the turbo to be used with a new application, exhaust manifold or downpipe.
- To obtain a more desirable A/R size for your application.