Categories
- Turbochargers
- -AirWerks BorgWarner S Series
- -Borg Warner EFR Series
- -Garrett GT Dual Ball Bearing
- -Garrett GTW Series
- -Garrett GTX-R Dual BB Billet
- -Garrett GT Journal Bearing
- -Garrett T Series Journal Bearing
- -Garrett T Series Ball Bearing
- -Vehicle Specific Turbo Kits
- -Garrett GT Ball Bearing CHRA's
- -Compressor & Turbine Wheels
- -Garrett Compressor Housings
- -Garrett Turbine Housings
- -TiAL SS Turbine Housings
- -Other Turbo Accessories
- -Garrett Drag Race Turbo Sheet
- -Turbo Compressor & Turbine Maps
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
EnglishWalbro
Walbro 255 LPH Fuel Pump: 2004+ Mazda RX-8
Walbro 255 LPH in-tank Fuel Pump.
Authentic Walbro 255 LPH high pressure in-tank fuel pump only. Same outer exterior design & dimensions as the RX-8 OEM fuel pump. Flows more fuel than the stock pump & recommended for turbo or supercharged application only.
Walbro in-tank electric fuel pumps utilize a proven gerotor design. The outside dimensions, however, are compact enough to fit existing hanger assemblies, without modification.
Note: When installing this pump into the stock RX-8 pump housing, it is imperative that you secure the venturi cap on the pressure regulator to keep it from popping off due to the extra pressure produced by this pump. Simply hold the cap in place while you slowly heat & fuse the plastic with a soldering iron.
$81.00
86-91 Mazda FC RX-7 SS Braided Oil Cooler Line/Hose Kit
Made in USA. The Himni Racing FC RX7 St...
$215.00
Walbro 255 LPH Fuel Pump: 2004+ Mazda RX-8
Walbro 255 LPH in-tank Fuel Pump.
Authentic Walbro 255 LPH high pressure in-tank fuel pump only. Same outer exterior design & dimensions as the RX-8 OEM fuel pump. Flows more fuel than the stock pump & recommended for turbo or supercharged application only.
Walbro in-tank electric fuel pumps utilize a proven gerotor design. The outside dimensions, however, are compact enough to fit existing hanger assemblies, without modification.
Note: When installing this pump into the stock RX-8 pump housing, it is imperative that you secure the venturi cap on the pressure regulator to keep it from popping off due to the extra pressure produced by this pump. Simply hold the cap in place while you slowly heat & fuse the plastic with a soldering iron.
$81.00
Himni SS Master Engine Nut & Bolt Kit, 87-91 Mazda RX-7
Master engine hardware kit. Replaces mo...
$78.00
Walbro 255 LPH Fuel Pump: 2004+ Mazda RX-8
Walbro 255 LPH in-tank Fuel Pump.
Authentic Walbro 255 LPH high pressure in-tank fuel pump only. Same outer exterior design & dimensions as the RX-8 OEM fuel pump. Flows more fuel than the stock pump & recommended for turbo or supercharged application only.
Walbro in-tank electric fuel pumps utilize a proven gerotor design. The outside dimensions, however, are compact enough to fit existing hanger assemblies, without modification.
Note: When installing this pump into the stock RX-8 pump housing, it is imperative that you secure the venturi cap on the pressure regulator to keep it from popping off due to the extra pressure produced by this pump. Simply hold the cap in place while you slowly heat & fuse the plastic with a soldering iron.
$81.00
Himni SS Master Engine Nut & Bolt Kit, 93-99 Mazda RX-7
Master engine hardware kit. Replaces mo...
$84.00
Walbro 255 LPH Fuel Pump: 2004+ Mazda RX-8
Walbro 255 LPH in-tank Fuel Pump.
Authentic Walbro 255 LPH high pressure in-tank fuel pump only. Same outer exterior design & dimensions as the RX-8 OEM fuel pump. Flows more fuel than the stock pump & recommended for turbo or supercharged application only.
Walbro in-tank electric fuel pumps utilize a proven gerotor design. The outside dimensions, however, are compact enough to fit existing hanger assemblies, without modification.
Note: When installing this pump into the stock RX-8 pump housing, it is imperative that you secure the venturi cap on the pressure regulator to keep it from popping off due to the extra pressure produced by this pump. Simply hold the cap in place while you slowly heat & fuse the plastic with a soldering iron.
$81.00
2A Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 86-92
Himni Racing Polyurethane FC RX-7 Motor...
$98.00
Walbro 255 LPH Fuel Pump: 2004+ Mazda RX-8
Walbro 255 LPH in-tank Fuel Pump.
Authentic Walbro 255 LPH high pressure in-tank fuel pump only. Same outer exterior design & dimensions as the RX-8 OEM fuel pump. Flows more fuel than the stock pump & recommended for turbo or supercharged application only.
Walbro in-tank electric fuel pumps utilize a proven gerotor design. The outside dimensions, however, are compact enough to fit existing hanger assemblies, without modification.
Note: When installing this pump into the stock RX-8 pump housing, it is imperative that you secure the venturi cap on the pressure regulator to keep it from popping off due to the extra pressure produced by this pump. Simply hold the cap in place while you slowly heat & fuse the plastic with a soldering iron.
$81.00
Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 93-00
Himni Racing Polyurethane FD RX-7 Motor...
$99.90
Walbro 255 LPH Fuel Pump: 2004+ Mazda RX-8
Walbro 255 LPH in-tank Fuel Pump.
Authentic Walbro 255 LPH high pressure in-tank fuel pump only. Same outer exterior design & dimensions as the RX-8 OEM fuel pump. Flows more fuel than the stock pump & recommended for turbo or supercharged application only.
Walbro in-tank electric fuel pumps utilize a proven gerotor design. The outside dimensions, however, are compact enough to fit existing hanger assemblies, without modification.
Note: When installing this pump into the stock RX-8 pump housing, it is imperative that you secure the venturi cap on the pressure regulator to keep it from popping off due to the extra pressure produced by this pump. Simply hold the cap in place while you slowly heat & fuse the plastic with a soldering iron.
$81.00
HR GT Turbo Water / Oil Installation Kit : GT25R - GT35R
For use with All small to mid frame Gar...
$78.00Featured Products - Turbochargers
Himni Racing Polyurethane FC RX-7 Motor...
Himni Racing Polyurethane FD RX-7 Motor...
Bestsellers
Customer Testimonials
I ordered a Tial blow off valve and it was at my door in only 3 days! The serial number checked out with TiAl as authentic. No one else had the color......
Read More ->
AWESOME SHOP
I LOVED THE SERVICE YOU GUYS GAVE ME WITH MY NEW WASTE GATE! TRULY HELPFUL AND GENEROUS. LOOK FORWARD TO BUYING MORE.
- Sheryl P. CasulA, Australia...
Read More ->
LATEST PRODUCTS
Garrett 40mm GVW-40 External Wastegate K...
-
Garrett 40mm GVW-40 External Wastegate K...
EXTRAS
SUPPORTS
© Copyright 2005-2023 Himni Racing. All Rights Reserved.