Categories
- Turbochargers
- -AirWerks BorgWarner S Series
- -Borg Warner EFR Series
- -Garrett GT Dual Ball Bearing
- -Garrett GTW Series
- -Garrett GTX-R Dual BB Billet
- -Garrett GT Journal Bearing
- -Garrett T Series Journal Bearing
- -Garrett T Series Ball Bearing
- -Vehicle Specific Turbo Kits
- -Garrett GT Ball Bearing CHRA's
- -Compressor & Turbine Wheels
- -Garrett Compressor Housings
- -Garrett Turbine Housings
- -TiAL SS Turbine Housings
- -Other Turbo Accessories
- -Garrett Drag Race Turbo Sheet
- -Turbo Compressor & Turbine Maps
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
EnglishRC Engineering
RC Engineering 1200cc JAPAN Fuel Injectors (Low Ohm, 114 LB/Hour
RC Engineering 1200cc Low ohm /Impedance/ resistance fuel injectors. Standard 11mm Japan O-ring (Mazda RX-7 Upper style) design is a popular drop-in upgrade. Fits many imports & domestic makes/models. Outstanding flow pattern for maximum performance. Each RC injector sent from Himni Racing includes a flow test print out of the actual injector(s) received. When more than one is purchased, each hand selected injector are sent as a matched set for perfect flow balance.
- Electrical Connecter: Standard Square EV1
- Type: Peak & Hold 11mm O-ring Japan (Mazda FC RX-7 Upper Design)
- Flow Rate: 1090 CC's / MIN @ 43.5 PSI
- Flow Rate: 1200 CC's / MIN @ 55 PSI
- Flow Rate: 104 LBS / HR @ 43.5 PSI
- Flow Rate LB's: 52 LBS / HR @ 43.5 PSI
- Resistance: Low, 2.5 Ohms
- Voltage: 8-15 Volts
- Amperage: Peak 4.0 Amps / Hold 1.5 Amps
- Pressure: Min 30 PSIG / Max 100 PSIG
- Compatible Fuel Types: Pump Gas, Leaded Race Gas, Alcohol/Meth
Note:: If you are unsure if this is the correct injector for your application, please email us before buying & we will be happy to help. Price is per injector or as a set if drop down menu is shown.
$95.00
Himni SS Master Engine Nut & Bolt Kit, 87-91 Mazda RX-7
Master engine hardware kit. Replaces mo...
$78.00
RC Engineering 1200cc JAPAN Fuel Injectors (Low Ohm, 114 LB/Hour
RC Engineering 1200cc Low ohm /Impedance/ resistance fuel injectors. Standard 11mm Japan O-ring (Mazda RX-7 Upper style) design is a popular drop-in upgrade. Fits many imports & domestic makes/models. Outstanding flow pattern for maximum performance. Each RC injector sent from Himni Racing includes a flow test print out of the actual injector(s) received. When more than one is purchased, each hand selected injector are sent as a matched set for perfect flow balance.
- Electrical Connecter: Standard Square EV1
- Type: Peak & Hold 11mm O-ring Japan (Mazda FC RX-7 Upper Design)
- Flow Rate: 1090 CC's / MIN @ 43.5 PSI
- Flow Rate: 1200 CC's / MIN @ 55 PSI
- Flow Rate: 104 LBS / HR @ 43.5 PSI
- Flow Rate LB's: 52 LBS / HR @ 43.5 PSI
- Resistance: Low, 2.5 Ohms
- Voltage: 8-15 Volts
- Amperage: Peak 4.0 Amps / Hold 1.5 Amps
- Pressure: Min 30 PSIG / Max 100 PSIG
- Compatible Fuel Types: Pump Gas, Leaded Race Gas, Alcohol/Meth
Note:: If you are unsure if this is the correct injector for your application, please email us before buying & we will be happy to help. Price is per injector or as a set if drop down menu is shown.
$95.00
Himni SS Master Engine Nut & Bolt Kit, 93-99 Mazda RX-7
Master engine hardware kit. Replaces mo...
$84.00
RC Engineering 1200cc JAPAN Fuel Injectors (Low Ohm, 114 LB/Hour
RC Engineering 1200cc Low ohm /Impedance/ resistance fuel injectors. Standard 11mm Japan O-ring (Mazda RX-7 Upper style) design is a popular drop-in upgrade. Fits many imports & domestic makes/models. Outstanding flow pattern for maximum performance. Each RC injector sent from Himni Racing includes a flow test print out of the actual injector(s) received. When more than one is purchased, each hand selected injector are sent as a matched set for perfect flow balance.
- Electrical Connecter: Standard Square EV1
- Type: Peak & Hold 11mm O-ring Japan (Mazda FC RX-7 Upper Design)
- Flow Rate: 1090 CC's / MIN @ 43.5 PSI
- Flow Rate: 1200 CC's / MIN @ 55 PSI
- Flow Rate: 104 LBS / HR @ 43.5 PSI
- Flow Rate LB's: 52 LBS / HR @ 43.5 PSI
- Resistance: Low, 2.5 Ohms
- Voltage: 8-15 Volts
- Amperage: Peak 4.0 Amps / Hold 1.5 Amps
- Pressure: Min 30 PSIG / Max 100 PSIG
- Compatible Fuel Types: Pump Gas, Leaded Race Gas, Alcohol/Meth
Note:: If you are unsure if this is the correct injector for your application, please email us before buying & we will be happy to help. Price is per injector or as a set if drop down menu is shown.
$95.00
86-91 Mazda FC RX-7 SS Braided Oil Cooler Line/Hose Kit
Made in USA. The Himni Racing FC RX7 St...
$215.00
RC Engineering 1200cc JAPAN Fuel Injectors (Low Ohm, 114 LB/Hour
RC Engineering 1200cc Low ohm /Impedance/ resistance fuel injectors. Standard 11mm Japan O-ring (Mazda RX-7 Upper style) design is a popular drop-in upgrade. Fits many imports & domestic makes/models. Outstanding flow pattern for maximum performance. Each RC injector sent from Himni Racing includes a flow test print out of the actual injector(s) received. When more than one is purchased, each hand selected injector are sent as a matched set for perfect flow balance.
- Electrical Connecter: Standard Square EV1
- Type: Peak & Hold 11mm O-ring Japan (Mazda FC RX-7 Upper Design)
- Flow Rate: 1090 CC's / MIN @ 43.5 PSI
- Flow Rate: 1200 CC's / MIN @ 55 PSI
- Flow Rate: 104 LBS / HR @ 43.5 PSI
- Flow Rate LB's: 52 LBS / HR @ 43.5 PSI
- Resistance: Low, 2.5 Ohms
- Voltage: 8-15 Volts
- Amperage: Peak 4.0 Amps / Hold 1.5 Amps
- Pressure: Min 30 PSIG / Max 100 PSIG
- Compatible Fuel Types: Pump Gas, Leaded Race Gas, Alcohol/Meth
Note:: If you are unsure if this is the correct injector for your application, please email us before buying & we will be happy to help. Price is per injector or as a set if drop down menu is shown.
$95.00
2A Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 86-92
Himni Racing Polyurethane FC RX-7 Motor...
$98.00
RC Engineering 1200cc JAPAN Fuel Injectors (Low Ohm, 114 LB/Hour
RC Engineering 1200cc Low ohm /Impedance/ resistance fuel injectors. Standard 11mm Japan O-ring (Mazda RX-7 Upper style) design is a popular drop-in upgrade. Fits many imports & domestic makes/models. Outstanding flow pattern for maximum performance. Each RC injector sent from Himni Racing includes a flow test print out of the actual injector(s) received. When more than one is purchased, each hand selected injector are sent as a matched set for perfect flow balance.
- Electrical Connecter: Standard Square EV1
- Type: Peak & Hold 11mm O-ring Japan (Mazda FC RX-7 Upper Design)
- Flow Rate: 1090 CC's / MIN @ 43.5 PSI
- Flow Rate: 1200 CC's / MIN @ 55 PSI
- Flow Rate: 104 LBS / HR @ 43.5 PSI
- Flow Rate LB's: 52 LBS / HR @ 43.5 PSI
- Resistance: Low, 2.5 Ohms
- Voltage: 8-15 Volts
- Amperage: Peak 4.0 Amps / Hold 1.5 Amps
- Pressure: Min 30 PSIG / Max 100 PSIG
- Compatible Fuel Types: Pump Gas, Leaded Race Gas, Alcohol/Meth
Note:: If you are unsure if this is the correct injector for your application, please email us before buying & we will be happy to help. Price is per injector or as a set if drop down menu is shown.
$95.00
Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 93-00
Himni Racing Polyurethane FD RX-7 Motor...
$99.90
RC Engineering 1200cc JAPAN Fuel Injectors (Low Ohm, 114 LB/Hour
RC Engineering 1200cc Low ohm /Impedance/ resistance fuel injectors. Standard 11mm Japan O-ring (Mazda RX-7 Upper style) design is a popular drop-in upgrade. Fits many imports & domestic makes/models. Outstanding flow pattern for maximum performance. Each RC injector sent from Himni Racing includes a flow test print out of the actual injector(s) received. When more than one is purchased, each hand selected injector are sent as a matched set for perfect flow balance.
- Electrical Connecter: Standard Square EV1
- Type: Peak & Hold 11mm O-ring Japan (Mazda FC RX-7 Upper Design)
- Flow Rate: 1090 CC's / MIN @ 43.5 PSI
- Flow Rate: 1200 CC's / MIN @ 55 PSI
- Flow Rate: 104 LBS / HR @ 43.5 PSI
- Flow Rate LB's: 52 LBS / HR @ 43.5 PSI
- Resistance: Low, 2.5 Ohms
- Voltage: 8-15 Volts
- Amperage: Peak 4.0 Amps / Hold 1.5 Amps
- Pressure: Min 30 PSIG / Max 100 PSIG
- Compatible Fuel Types: Pump Gas, Leaded Race Gas, Alcohol/Meth
Note:: If you are unsure if this is the correct injector for your application, please email us before buying & we will be happy to help. Price is per injector or as a set if drop down menu is shown.
$95.00
HR GT Turbo Water / Oil Installation Kit : GT25R - GT35R
For use with All small to mid frame Gar...
$78.00Featured Products - Turbochargers
Himni Racing Polyurethane FC RX-7 Motor...
Himni Racing Polyurethane FD RX-7 Motor...
Bestsellers
Customer Testimonials
Oh my goodness! Fastest shipping I have ever experienced from the US! Many thanks
- James S. Ontario, Canada...
Read More ->
Great customer
Fast shipping and thoughtfull custoemer service. Laffy taffy happens to be my favorite thanks.
- Alexsandro M. Covington, VA...
Read More ->
LATEST PRODUCTS
Garrett 40mm GVW-40 External Wastegate K...
-
Garrett 40mm GVW-40 External Wastegate K...
EXTRAS
SUPPORTS
© Copyright 2005-2023 Himni Racing. All Rights Reserved.