Categories
- Turbochargers
- -AirWerks BorgWarner S Series
- -Borg Warner EFR Series
- -Garrett GT Dual Ball Bearing
- -Garrett GTW Series
- -Garrett GTX-R Dual BB Billet
- -Garrett GT Journal Bearing
- -Garrett T Series Journal Bearing
- -Garrett T Series Ball Bearing
- -Vehicle Specific Turbo Kits
- -Garrett GT Ball Bearing CHRA's
- -Compressor & Turbine Wheels
- -Garrett Compressor Housings
- -Garrett Turbine Housings
- -TiAL SS Turbine Housings
- -Other Turbo Accessories
- -Garrett Drag Race Turbo Sheet
- -Turbo Compressor & Turbine Maps
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
EnglishDEI
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
HR GT Turbo Water / Oil Installation Kit : GT25R - GT35R
For use with All small to mid frame Gar...
$78.00
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
Himni SS Master Engine Nut & Bolt Kit, 87-91 Mazda RX-7
Master engine hardware kit. Replaces mo...
$78.00
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 93-00
Himni Racing Polyurethane FD RX-7 Motor...
$99.90
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
Himni SS Master Engine Nut & Bolt Kit, 93-99 Mazda RX-7
Master engine hardware kit. Replaces mo...
$84.00
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
86-91 Mazda FC RX-7 SS Braided Oil Cooler Line/Hose Kit
Made in USA. The Himni Racing FC RX7 St...
$215.00
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
2A Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 86-92
Himni Racing Polyurethane FC RX-7 Motor...
$98.00Featured Products - Turbochargers
Himni Racing Polyurethane FD RX-7 Motor...
Himni Racing Polyurethane FC RX-7 Motor...
Bestsellers
Customer Testimonials
You guys are an example to every Shop! MANY THANKS for all your help!
- Kenneth B of Mosta, Malta...
Read More ->
Perfect
THANK YOU FOR THE EXTREMELY FAST SHIPPING!! HIMNI RACING HAS GREAT PRODUCTS!!
-Eric G. Cape Coral, FL...
Read More ->
LATEST PRODUCTS
Garrett 40mm GVW-40 External Wastegate K...
-
Garrett 40mm GVW-40 External Wastegate K...
EXTRAS
SUPPORTS
© Copyright 2005-2023 Himni Racing. All Rights Reserved.