EnglishExample: S480SX
S = S Generation or S Series (T series, GT series, S series)
4 = 400 Frame Size / Model
80 = Compressor Wheel Inducer Size In millimeters (mm)
X = The highest performance, Race Built Unit
S480SX (aka S480, S480S, S400SX4)
Categories
- Turbochargers
- -AirWerks BorgWarner S Series
- -Borg Warner EFR Series
- -Garrett GT Dual Ball Bearing
- -Garrett GTW Series
- -Garrett GTX-R Dual BB Billet
- -Garrett GT Journal Bearing
- -Garrett T Series Journal Bearing
- -Garrett T Series Ball Bearing
- -Vehicle Specific Turbo Kits
- -Garrett GT Ball Bearing CHRA's
- -Compressor & Turbine Wheels
- -Garrett Compressor Housings
- -Garrett Turbine Housings
- -TiAL SS Turbine Housings
- -Other Turbo Accessories
- -Garrett Drag Race Turbo Sheet
- -Turbo Compressor & Turbine Maps
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
There are currently no product reviews.
Newsletter
Subscribe to our newsletter for periodic updates and valuable coupons.
DEI
Himni Racing is your source for all AirWerks & BorgWarner turbos! AirWerks is the high performance turbo division of BorgWarner turbo systems. The 'S' Series AirWerks turbos are specifically designed for high performance & race applications. The S series turbos are defined in size & type, 1st by it's model frame size. (i.e. S200, S300, S400 etc) And 2nd by the compressor wheel inducer size. (i.e. S256, S366, S480) In some cases, the suffix "X" is added to distinguish that it's a Race Built turbo charger bread for the highest performance.
Product Image
Item Name-
Price
DEI Titanium Turbo Shield Kit, T25/T28 Turbine Blanket
For T25/T28 turbo units. Available as a...
Price: $192.00
DEI Titanium Turbo Shield Kit, T3 Turbine Blanket
For T3 turbo units. Available as a full...
Price: $178.00
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full...
Price: $365.95
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
Garrett 40mm External Wastegate Kit GVW-40 SILVER
Garrett 40mm GVW-40 External Wastegate ...
$317.00
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
New Products For May - Turbochargers
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
86-91 Mazda FC RX-7 SS Braided Oil Cooler Line/Hose Kit
Made in USA. The Himni Racing FC RX7 St...
$215.00
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
2A Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 86-92
Himni Racing Polyurethane FC RX-7 Motor...
$98.00
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 93-00
Himni Racing Polyurethane FD RX-7 Motor...
$99.90
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
Himni SS Master Engine Nut & Bolt Kit, 87-91 Mazda RX-7
Master engine hardware kit. Replaces mo...
$78.00
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
HR GT Turbo Water / Oil Installation Kit : GT25R - GT35R
For use with All small to mid frame Gar...
$78.00
DEI Titanium Turbo Shield Kit, T6 Turbine Blanket
For T6 turbo units. Available as a full kit or as a shield only. Select from menu.
Custom fit T25/T28, T3, T4 & T6 Titanium Turbo Shields with LR Technology. Provides the ultimate means of reducing turbo lag while serving as a superior heat barrier, shielding and protecting engine components, hoods and painted surfaces and offers a very cool looking carbon fiber look.
Made from pulverized volcanic rock then strained into a fiber material, Titanium Turbo Shields can withstand direct heat up to 1800 F and 2500 F radiant heat. This means retaining more heat in the turbine and less damaging underhood heat. The result is a cooler air intake temperature and a boost in horsepower.
Stronger and more durable than other turbo blankets or shields, Titanium Turbo Shields include a hi-temp rated silica insulation padding under the tight outer layer for extra added protection against extreme turbo-generated heat.
Features:
- Anchoring hooks incorporated to secure in place.
- Custom fit for easy install.
- Ultimate thermal barrier reduces turbo lag.
- LR Technology for prolong lifespan.
- Hi-Tech custom Kevlar appearance.
- Improved durability against abrasions, temperatures, and vibration.
- Works with both internal & external wastegates
Each Kit Includes:
- Shield
- 2” x 15 ft roll of Titanium wrap
- Two 14” stainless steel ties
- 5 ft of fastening wire
Titanium Turbo Shield Dimensions:
- T25/T28: Outer circumference: 19”, Inner width: approx 2-1/2
- T3 (T31:) Outer circumference: 19”, Inner width: approx 2-1/2”
- T4 (T04) Outer circumference: 22”, Inner width: approx 2-3/4”
- T6: Outer circumference: 26”, Inner width: approx 3-3/4”
Himni SS Master Engine Nut & Bolt Kit, 93-99 Mazda RX-7
Master engine hardware kit. Replaces mo...
$84.00
Featured Products - Turbochargers
Himni Racing Polyurethane FC RX-7 Motor...
Himni Racing Polyurethane FD RX-7 Motor...
Bestsellers
Customer Testimonials
Fantastic
Perfect
I called and placed my order over the phone. I had a bunch of questions and the lady was kind and very helpful. She made sure I got all the right......
Read More ->
Perfect
THANK YOU FOR THE EXTREMELY FAST SHIPPING!! HIMNI RACING HAS GREAT PRODUCTS!!
-Eric G. Cape Coral, FL...
Read More ->
LATEST PRODUCTS
Garrett 40mm GVW-40 External Wastegate K...
-
Garrett 40mm GVW-40 External Wastegate K...
EXTRAS
SUPPORTS
© Copyright 2005-2023 Himni Racing. All Rights Reserved.