EnglishExample: S480SX
S = S Generation or S Series (T series, GT series, S series)
4 = 400 Frame Size / Model
80 = Compressor Wheel Inducer Size In millimeters (mm)
X = The highest performance, Race Built Unit
S480SX (aka S480, S480S, S400SX4)
Categories
- Turbochargers
- -AirWerks BorgWarner S Series
- -Borg Warner EFR Series
- -Garrett GT Dual Ball Bearing
- -Garrett GTW Series
- -Garrett GTX-R Dual BB Billet
- -Garrett GT Journal Bearing
- -Garrett T Series Journal Bearing
- -Garrett T Series Ball Bearing
- -Vehicle Specific Turbo Kits
- -Garrett GT Ball Bearing CHRA's
- -Compressor & Turbine Wheels
- -Garrett Compressor Housings
- -Garrett Turbine Housings
- -TiAL SS Turbine Housings
- -Other Turbo Accessories
- -Garrett Drag Race Turbo Sheet
- -Turbo Compressor & Turbine Maps
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
There are currently no product reviews.
Newsletter
Subscribe to our newsletter for periodic updates and valuable coupons.
Exedy
Himni Racing is your source for all AirWerks & BorgWarner turbos! AirWerks is the high performance turbo division of BorgWarner turbo systems. The 'S' Series AirWerks turbos are specifically designed for high performance & race applications. The S series turbos are defined in size & type, 1st by it's model frame size. (i.e. S200, S300, S400 etc) And 2nd by the compressor wheel inducer size. (i.e. S256, S366, S480) In some cases, the suffix "X" is added to distinguish that it's a Race Built turbo charger bread for the highest performance.
Product Image
Item Name-
Price
EXEDY OEM Replacement Clutch Kit - 1986-91 Non-turbo FC RX-7
Non-Turbo FC kit is available for (1986...
Price: $159.90
EXEDY OEM Replacement Clutch Kit - 1986-91 TURBO FC RX-7
Turbo FC kit is available for (1986-88 ...
Price: $179.90
Exedy Stage 1 Organic Clutch Kit - 1986-91 Non-turbo FC RX-7
Non-turbo (N/A) EXEDY Stage 1 Organic C...
Price: $208.00
Exedy Stage 1 Organic Clutch Kit - 1986-91 TURBO FC RX-7
Turbo EXEDY Stage 1 Organic Clutch Kit ...
Price: $539.95
Exedy Stage 2 Cerametallic Clutch Kit- 1986-91 Non-turbo FC RX-7
Non-turbo (N/A) EXEDY Stage 2 Cerametal...
Price: $405.95
Exedy Stage 2 Cerametallic Clutch Kit- 1986-91 TURBO FC RX-7
Turbo EXEDY Stage 2 Cerametallic Clutch...
Price: $678.95
Exedy Stage 3 Hyper Single Clutch Kit- 1986-91 TURBO FC RX-7
EXEDY Stage 3 Hyper Single Clutch Kit w...
Price: $962.95
Exedy Stage 4 Twin Disc Clutch Kit- 1986-91 TURBO FC RX-7
Turbo EXEDY Stage 4 Twin Disc Ceramic C...
Price: $1,832.00
Exedy 'Hyper Single' Replacment Flywheel, 86-91 Mazda FC RX-7
Exedy replacement chromolly flywheel fo...
Price: $873.00
Exedy Lightweight Racing Flywheel 12 LB: 86-91 Mazda FC RX-7
EXEDY Racing Flywheels are made from so...
Price: $564.00
Exedy Twin Replacment Clutch Disc A, 86-91 Mazda FC RX-7
Replacement clutch disc A for Hyper Twi...
Price: $443.00
Exedy Twin Replacment Clutch Disc B, 86-91 Mazda FC RX-7
Replacement clutch disc B for Exedy Twi...
Price: $443.00
Exedy 'Single' Replacment Flywheel: 2003+ Mazda RX8
Exedy replacement chromolly flywheel fo...
Price: $519.00
Exedy Hyper Twin Replacment Clutch Disc A: 2003+ Mazda RX8
Replacement clutch disc A for Exedy Hyp...
Price: $265.10
Exedy Hyper Twin Replacment Clutch Disc B: 2003+ Mazda RX8
Replacement clutch disc B for Exedy Hyp...
Price: $265.10
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from so...
Price: $267.51
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
Garrett 40mm External Wastegate Kit GVW-40 SILVER
Garrett 40mm GVW-40 External Wastegate ...
$317.00
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
New Products For May - Turbochargers
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
Himni SS Master Engine Nut & Bolt Kit, 93-99 Mazda RX-7
Master engine hardware kit. Replaces mo...
$84.00
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
HR GT Turbo Water / Oil Installation Kit : GT25R - GT35R
For use with All small to mid frame Gar...
$78.00
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
Himni SS Master Engine Nut & Bolt Kit, 87-91 Mazda RX-7
Master engine hardware kit. Replaces mo...
$78.00
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
2A Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 86-92
Himni Racing Polyurethane FC RX-7 Motor...
$98.00
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
86-91 Mazda FC RX-7 SS Braided Oil Cooler Line/Hose Kit
Made in USA. The Himni Racing FC RX7 St...
$215.00
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 93-00
Himni Racing Polyurethane FD RX-7 Motor...
$99.90
Featured Products - Turbochargers
Himni Racing Polyurethane FC RX-7 Motor...
Himni Racing Polyurethane FD RX-7 Motor...
Bestsellers
Customer Testimonials
Great Customer Service!!
Service Can't Be Beat!!
You guys are an example to every Shop! MANY THANKS for all your help!
- Kenneth B of Mosta, Malta...
Read More ->
Service Can't Be Beat!!
Hands down, best supplier of parts ANYWHERE...PERIOD. Fast service and very knowledgeable staff helped our build and continues to be a resource when......
Read More ->
LATEST PRODUCTS
Garrett 40mm GVW-40 External Wastegate K...
-
Garrett 40mm GVW-40 External Wastegate K...
EXTRAS
SUPPORTS
© Copyright 2005-2023 Himni Racing. All Rights Reserved.