Categories
- Turbochargers
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
EnglishExedy
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
Garrett 40mm External Wastegate Kit GVW-40 SILVER
Garrett 40mm GVW-40 External Wastegate ...
$317.00
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
New Products For April
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
2A Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 86-92
Himni Racing Polyurethane FC RX-7 Motor...
$98.00
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
Himni SS Master Engine Nut & Bolt Kit, 93-99 Mazda RX-7
Master engine hardware kit. Replaces mo...
$84.00
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
Himni SS Master Engine Nut & Bolt Kit, 87-91 Mazda RX-7
Master engine hardware kit. Replaces mo...
$78.00
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 93-00
Himni Racing Polyurethane FD RX-7 Motor...
$99.90
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
86-91 Mazda FC RX-7 SS Braided Oil Cooler Line/Hose Kit
Made in USA. The Himni Racing FC RX7 St...
$215.00
Exedy Lightweight Racing Flywheel 12 LB: 2003+ Mazda RX8
EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the cooling of the clutch. The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.
Not for use with Exedy Hyper single, twin, triple or Carbon clutches. Works with standard steel pressure plate clutches only. (ie, stage 1, stage 2, etc) Requires counter weight solid separately.
NOTE:: This flywheel fits all of the rotary cars listed below. Exedy counterweight part numbers however are listed as fitting both the S4 & S5 TurboII. This is not correct. Only S5 & S6 share the same part number. (use the same rotors) We recommend using a ACT counter weight to insure a properly balanced rotating assembly. See below.
Exedy 12 LB Racing Flywheel Fits:
-87-88 S4 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW01)
-89-91 S5 Mazda FC3S RX-7 Turbo II (use with ACT Counterweight P/N: CW02)
-93-95 S6 Mazda FD3S RX-7 TT (use with ACT Counterweight P/N: CW02)
-04+ Mazda FE RX-8, 6 port (use with ACT Counterweight P/N: CW03)
HR GT Turbo Water / Oil Installation Kit : GT25R - GT35R
For use with All small to mid frame Gar...
$78.00
Featured Products
Himni Racing Polyurethane FC RX-7 Motor...
Himni Racing Polyurethane FD RX-7 Motor...
Bestsellers
Customer Testimonials
Fast shipping and thoughtfull custoemer service. Laffy taffy happens to be my favorite thanks.
- Alexsandro M. Covington, VA...
Read More ->
Great Customer Service!!
You guys are an example to every Shop! MANY THANKS for all your help!
- Kenneth B of Mosta, Malta...
Read More ->
LATEST PRODUCTS
Garrett 40mm GVW-40 External Wastegate K...
-
Garrett 40mm GVW-40 External Wastegate K...
EXTRAS
SUPPORTS
© Copyright 2005-2023 Himni Racing. All Rights Reserved.