Tapping the compressor housing for a boost pressure source just got easier...because you no longer have to do it. A boost pressure source near the compressor housing is...
Custom machined Oil inlet / feed fitting for Garrett GT Ball Bearing Turbos. Screws right into the turbos listed below & works with any -4 AN line. Unrestricted...
Custom machined Oil inlet / feed fitting for Garrett GT Ball Bearing Turbos. Screws right into the turbos listed below & works with any -3 AN line. Has a built-in oil...
Custom machined Oil inlet / feed fitting for Garrett GT Ball Bearing Turbos. Screws right into the turbos listed below & works with any -4 AN line. Has a built-in oil...
For use with All small to mid frame Garrett GT series ball bearing turbos (GT25R - GT35R) This Himni Racing GT turbo installation kit will make installing your new turbo...
Oil inlet restrictor for T series turbochargers. Installed at the oil inlet on turbo to reduce max oil pressure going into the turbo to prevent turbo seal damage due to...
EVO 8 Oil Feed adapter. Cyl Head to -4 Male AN Flair. Fits directly to the original oil feed source on the cylinder head & allows for the use of any -4 an oil line. ....
Machined metric oil feed fitting for the Subaru STI stock oil feed source. 12mm female flare to -4 AN male. Allows -4 an stainless steel braided line to screw right into...
1.8T oil feed adapter simplifies installation of aftermarket oil lines. Adapts to the stock oil feed line source at the oil filter housing to -4 Male AN Flair. Allows...
Himni Racing SS oil feed line kit for use with Garrett 'GT BALL BEARING SERIES' Turbochargers only. (GT25R-GT35R) Other kits available for the following turbo...
Banjo fitting kit for coolant / water connections on Garrett T Serise ball bearing Turbochargers. Works with standard 3/8" hose. The fitting screws to the turbo & the...
Banjo fitting kit for coolant / water connections on Garrett GT25R-GT35R ball bearing turbochargers. Works with standard 3/8" hose. The fitting screws to the turbo & the...
Banjo fitting kit for coolant / water connections on Garrett GT25R/GT28R Turbochargers. Works with standard 3/8" hose. The fitting screws to the turbo & the hose simply...
Banjo fitting kit for coolant / water connections on Garrett GT28RS & GT2871R Turbochargers. Works with standard 3/8" hose. The fitting screws to the turbo & the hose...
Banjo fitting kit for coolant / water connections on Garrett GT2876R & GT3071R Turbochargers. Works with standard 3/8" hose. The fitting screws to the turbo & the hose...
Banjo fitting kit for coolant / water connections on Garrett GT30R. GT3076R Turbochargers. Works with standard 3/8" hose. The fitting screws to the turbo & the hose...
Banjo fitting kit for coolant / water connections on Garrett GT3082R, GT3040R Turbocharger. Works with standard 3/8" hose. The fitting screws to the turbo & the hose...
Banjo fitting kit for coolant / water connections on Garrett GT3071R Turbocharger. Works with standard 3/8" hose. The fitting screws to the turbo & the hose simply slips...
Banjo fitting kit for coolant / water connections on Garrett GT3076R-WG Turbocharger. Works with standard 3/8" hose. The fitting screws to the turbo & the hose simply...
Banjo fitting kit for coolant / water connections on Garrett GT25R Turbocharger. Works with standard 3/8" hose. The fitting screws to the turbo & the hose simply slips...
Banjo fitting kit for coolant / water connections on Garrett GT35R, GT3582R Turbocharger. Works with standard 3/8" hose. The fitting screws to the turbo & the hose...
Banjo fitting kit for coolant connections on the Garrett GT40R turbo. Pick from 3/8" push lock hose barb style or -6 AN style. Comes with aluminum banjo fitting, 1 banjo...
Banjo fitting kit for coolant connections on the Garrett GT42R & GT42RS turbos. Pick from 3/8" push lock hose barb style or -6 AN style. Comes with aluminum banjo...
14mm Machined aluminum Banjo fitting kit. Great for turbo water & other connections. 14mm banjo bolt to 1/4" NPT - Very flexible when used with 1/4" NPT to -6 AN...
Banjo fitting kit is good for use with water, oil & fuel. Works with standard 3/8" hose. The fitting screws to the turbo & the hose simply slips on to the barb, then...
-4 AN Male to -4AN female swivel fitting, 45 degree bend. Converts -4 AN hose with straight ends to a 45 degree bend. Good for getting around tight spots. Great for...
-4 AN Male to -4AN female swivel fitting, 90 degree bend. Converts -4 AN hose with straight ends to a 90 degree bend. Good for getting around tight spots. Great for...
This item has been Discontinued & is no longer available. This is a filtered fitting. 1/8" NPT male to -4 an male. Anodized aluminum. Has built in screen (dirt trap) on...
3/8" Male quick connect o-ring fitting to -6 AN. Allows ease of transition from -6 AN to the newer O-ringed squeeze and release type fittings found on many newer fuel...
5/16" Male quick connect o-ring fitting to -6 AN. Allows ease of transition from -6 AN to the newer O-ringed squeeze and release type fittings found on many newer fuel...
Turbo Oil return / drain fitting. Fits both our GT series & T series turbo oil return flanges with 1/2" female NPT threads. Threaded to a male 1/2" NPT with a 45 degree...
Turbo Oil return / drain fitting. Fits both our GT series & T series turbo oil return flanges. Threaded to a male 1/2" NPT with a Straight 5/8" hose barb. Works with any...
This fitting bung is used to on engine that doesn't normally have a turbo oil return point. A hole is drilled into the oil pan & the bung is then welded to the pan. Your...
Standard 18mm X 1.50 pitch o2 Sensor bung plug. Ideal for blocking of an extra 02 sensor port. Fits in place of 99% of OEM & aftermarket sensors including Bosch units....
12mm to -4 AN metric Banjo Fitting Kit. Low profile fits into tight places. Includes (1) Banjo fitting with 12mm hole (banjo side) to -4 AN male flare, 1 Banjo bolt...
12mm to -4 male flare banjo fitting. Works with any 12mm banjo bolt & -4 AN line/hose/fittings. Universal use. Also fits VW/Audi 1.8T, Subaru WRX/STI & Nissan 300ZX oil...
Metric fitting:: 12mm metric male (1.25 fine pitch) to male -6 AN Flare, with sealing Washer on the metric side. Provides a easy way to connect to stainless Steel...
Metric fitting:: 12mm metric male (1.5 pitch) to male -6 AN Flare, with sealing Washer on the metric side. Provides a easy way to connect to stainless Steel braided type...
Metric fitting:: 12mm metric male (1.5 pitch) to male -8 AN Flare, with sealing Washer on the metric side. Provides a easy way to connect to stainless Steel braided type...
14mm to -6 AN metric Banjo Fitting Kit. Includes (1) Banjo fitting with 14mm hole (banjo side) to -6 AN male flare, 1 Banjo bolt (14mm x 1.5 pitch), (2) crush...
Metric fitting:: 14mm male (1.5 pitch) to male 6 AN Flare, with sealing Washer. Provides easy way to connect to stainless Steel braided type lines with #6 AN hose ends....
14mm x 1.5 thread pitch Banjo Bolt w/ gaskets. Price is for one bolt & 2 crush washers. For use with all 14mm banjo fittings. Select between standard or compact head...
Metric fitting:: 16mm male (1.5 pitch) to male 6 AN Flare, with sealing Washer. Provides easy way to connect to stainless Steel braided type lines with #6 AN hose ends....
Metric fitting:: 18mm male (1.5 pitch) to male 6 AN Flare, with sealing Washer. Provides easy way to connect to stainless Steel braided type lines with #6 AN hose ends....
I can't thank Himni enough for your awesome customer service and technical help. The turbo parts fit perfect. My new favorite turbo shop!
- Chris Y....... Read More ->
Turbochargers
Turbo Gaskets
Fittings & Lines
Featured Products ...
Shipping & Returns
