FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Russell Brake Caliper Speed Bleeder kit for 1993-2001 Mazda FD3S RX-7, All. Complete front & rear speed bleeders directly replaces the factory fittings for all four brakes.
Brand: Russell
Model: Import Brake Speed Bleeder Kit
Position: Front, Rear For Both Left & Right side.
Quantity: Full Kit for all 4 brakes, includes caps.
Fits Front Caliper: 4 Piston
Fits Rear Caliper: Single Piston
Application: All 1993-2001 Twin Turbo Mazda FD RX-7 (S6)
Sizing: 8mm x 1.0mm X 34mm / 7mm x 1.0mm X 34mm
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
One Person System Takes The Work Out of Brake Bleeding... Bleeding your brake or clutch line has never been easier or simpler. Revolutionary double-patented Speed Bleeder replaces the original bleeder valve in your caliper/wheel cylinder with a spring-loaded one-way ball and check valve design. This unique design opens to allow the old fluid and air out, then closes automatically between pumps to prevent the old fluid and air from re-entering the line.
$44.90EBC Green Stuff Brake Pads, Rear set (both left & right side) for 1993-2001 Mazda FD3S RX-7, All.
Brand: EBC
Model: GreenStuff
Position: Rear, Includes Left & Right side
Quantity: Matching set, x4 pads total
Brake Pad Material: Organic
Fits Caliper: Rear (Single Piston, all)
Fits Rotor: Both Vented & Solid
Application: All 1993-2001 Twin Turbo Mazda FD RX-7 (S6)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
EBC Greenstuff 2000 series pads are designed for premium street driving and better brake effect at loads and speed. They have a high initial brake effect and give drivers confidence from the first application of the brake pedal. There is no such thing as a no-dust pad. The very nature of how a brake works requires that some dust be generated to avoid rotor vibration (shimmying). EBC Greenstuff 2000 passenger car pads create less dust, and the dust is more easily washed off than with most other brake pads. All pads create more dust as they are bedding in, especially if the rotors are worn.
Organic, non-asbestos material
Fast/heavy street use
Effective to above 650 degrees C
Award-winning formulation for noticeable brake improvements
Hawk Performance HP Plus Brake Pads, Rear set (both left & right side) for 1993-2001 Mazda FD3S RX-7.
Brand: Hawk
Model:HP Plus - Street & Track
Position: Rear, Includes Left & Right side
Quantity: Matching set, x4 pads total
Material: Ferro-Carbon
Fits Caliper: Rear (Single Piston)
Application: All 1993-2001 Twin Turbo Mazda FD RX-7 (S6)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
- Very high friction output.
- Street pad made for racing.
- Well suited for Autocross & track.
- Increased rotor wear compared to HPS pads due to increased "bite."
- Temp range: 100-800 F
All Hawk Performance HP Plus / Autocross brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials. HP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and “track day” applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.
$76.95Hawk Performance HPS Brake Pads, Rear set (both left & right side) for 1993-2001 Mazda FD3S RX-7.
Brand: Hawk
Model: HPS - Street Compound
Position: Rear, Includes Left & Right side
Quantity: Matching set, x4 pads total
Fits Caliper: Rear (Single Piston)
Application: All 1993-2001 Twin Turbo Mazda FD RX-7 (S6)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
The Hawk HPS brake pads feature an excellent street brake compound that provides an ideal upgrade over an OEM type pad. Much improved stopping power over stock and standard replacement pads. Ferro-Carbon compound pads offer low dust, low noise, minimal rotor wear, and reasonable pad wear. Well suited for daily driving and spirited performance. A great choice for everyday street driving.
$76.95EBC Green Stuff Brake Pads, Front set (both left & right side) for 1993-2001 Mazda FD3S RX-7, All.
Brand: EBC
Model: GreenStuff
Position: Front, Includes Left & Right side
Quantity: Matching set, x4 pads total
Fits Caliper: Front (4 Piston w/ 5 Lug)
Brake Pad Material: Organic
Brake Pad Construction: Integrally molded with shims
Application: All 1993-2001 Twin Turbo Mazda FD RX-7 (S6)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
EBC Greenstuff 2000 series pads are designed for premium street driving and better brake effect at loads and speed. They have a high initial brake effect and give drivers confidence from the first application of the brake pedal. There is no such thing as a no-dust pad. The very nature of how a brake works requires that some dust be generated to avoid rotor vibration (shimmying). EBC Greenstuff 2000 passenger car pads create less dust, and the dust is more easily washed off than with most other brake pads. All pads create more dust as they are bedding in, especially if the rotors are worn.
Organic, non-asbestos material
Fast/heavy street use
Effective to above 650 degrees C
Award-winning formulation for noticeable brake improvements
Hawk Performance HPS Brake Pads, Front set (both left & right side) for 1993-2001 Mazda FD3S RX-7 w/ 4 Piston Calipers.
Brand: Hawk
Model: HPS - Street Compound
Position: Front, Includes Left & Right side
Quantity: Matching set, x4 pads total
Fits Caliper: Front (4 Piston w/ 5 Lug)
Application: All 1993-2001 Twin Turbo Mazda FD RX-7 (S6)
In Stock? Yes. This item is normally in stock and ships within 1-72 hours.
The Hawk HPS brake pads feature an excellent street brake compound that provides an ideal upgrade over an OEM type pad. Much improved stopping power over stock and standard replacement pads. Ferro-Carbon compound pads offer low dust, low noise, minimal rotor wear, and reasonable pad wear. Well suited for daily driving and spirited performance. A great choice for everyday street driving.
$84.95EBC Yellow Stuff Brake Pads, Rear set (both left & right side) for 1993-2001 Mazda FD3S RX-7, All.
Brand: EBC
Model: YellowStuff
Position: Rear, Includes Left & Right side
Quantity: Matching set, x4 pads total
Brake Pad Material: Aramid fiber
Fits Caliper: Rear (Single Piston)
Fits Rotor: Both Vented & Solid
Application: All 1993-2001 Twin Turbo Mazda FD RX-7 (S6)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
EBC Yellowstuff Aramid pads are the perfect pads for your daily driven race car. They are made from a full race material and are capable of high-temperature use with a very good wear life. Their "bite" from cold is superb, which is uncommon with race materials, which normally require warming-up, making these pads safe for use on the highway as well as on the race track. EBC makes increased stopping power available for your performance race machine and your demanding truck or SUV. These are not "low-dust" pads, but are similar to or better than OE pads.
$92.95Hawk Performance HP Plus Brake Pads, Front set (both left & right side) for 1993-2001 Mazda FD3S RX-7 w/ 5 Lug & 4 Piston Calipers.
Brand: Hawk
Model: HP Plus - Street & Track
Position: Front, Includes Left & Right side
Quantity: Matching set, x4 pads total
Material: Ferro-Carbon
Fits Caliper: Front (4 Piston w/ 5 Lug)
Application: All 1993-2001 Twin Turbo Mazda FD RX-7 (S6)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
- Very high friction output.
- Street pad made for racing.
- Well suited for Autocross & track.
- Increased rotor wear compared to HPS pads due to increased "bite."
- Temp range: 100-800 F
All Hawk Performance HP Plus / Autocross brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials. HP Plus utilizes a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, Solo II and “track day” applications. The Ferro-Carbon formulation offers lower wear rates and higher torque values than other competitive materials.
$98.90Hawk Performance Blue 9012 Race Only Brake Pads, Rear set (both left & right side) for 1993-2001 Mazda FD3S RX-7.
Brand:Hawk
Model: Blue 9012 - Race / Track
Position: Rear, Includes Left & Right side
Quantity: Matching set, x4 pads total
Material: Race Only Compound. Not for street use.
Fits Caliper: Rear (Single Piston)
Application: All 1993-2001 Twin Turbo Mazda FD RX-7 (S6)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
- Medium/high torque compound
- Excellent brake modulation
- #1 selling pad for SCCA
- Temp range: 250-1000 F
The Blue 9012 is for sports car racing and rally applications requiring medium initial bite and effectiveness. Good general purpose pad for vehicles retaining the stock brake calipers. Number one selling pad in SCCA.
Note:: Do not use these pads on the street. It will not only be ineffective but it is also dangerous. The compound is designed to perform at higher temperature thresholds found at the track only.
$99.95EBC Yellow Stuff Brake Pads, Front set (both left & right side) for 1993-2001 Mazda FD3S RX-7, All.
Brand: EBC
Model: YellowStuff
Position: Front, Includes Left & Right side
Quantity: Matching set, x4 pads total
Fits Caliper: Front (4 Piston w/ 5 Lug)
Brake Pad Material: Aramid fiber
Brake Pad Construction: Integrally molded with shims
Application: All 1993-2001 Twin Turbo Mazda FD RX-7 (S6)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
EBC Yellowstuff Aramid pads are the perfect pads for your daily driven race car. They are made from a full race material and are capable of high-temperature use with a very good wear life. Their "bite" from cold is superb, which is uncommon with race materials, which normally require warming-up, making these pads safe for use on the highway as well as on the race track. EBC makes increased stopping power available for your performance race machine and your demanding truck or SUV. These are not "low-dust" pads, but are similar to or better than OE pads.
$104.95FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
StopTech Stainless Steel Braided Brake Line kit for 1993-2001 Mazda FD3S RX-7, All. Complete direct bolt on kit replaces the lines for all four brakes.
Brand: StopTech
Position: Front, Rear For Both Left & Right side.
Quantity: Complete Kit for all 4 brakes, includes hardware.
Fits Caliper: All
Line Construction: Braided stainless steel.
Application: All 1993-2002 Twin Turbo Mazda FD RX-7 (S6)
In Stock?: This item is normally in stock and ships within 1-72 hours.
Stoptech® Stainless Steel Braided Brake Lines provide a more instant, stronger, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold or panic braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber lines have weakened and swelled due to age.
StopTech® brake lines consist of a PTFE (commonly referred to as PTFE®) inner line that carries the brake fluid, and is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.
The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.
A variety of end fittings are available to meet most application needs. All fittings are engineered for proper fit and durability. All necessary brackets and fasteners are included with each line kit for a direct bolt on installation
$124.00Hawk Performance Blue 9012 Race Only Brake Pads, Front set (both left & right side) for 1993-2001 Mazda FD3S RX-7 w/ 5 Lug & 4 Piston Calipers.
Brand:Hawk
Model: Blue 9012 - Race / Track
Position: Front, Includes Left & Right side
Quantity: Matching set, x4 pads total
Material: Race Only Compound. Not for street use.
Fits Caliper: Front (4 Piston w/ 5 Lug)
Application: All 1993-2001 Twin Turbo Mazda FD RX-7 (S6)
In Stock?: Yes. This item is normally in stock and ships within 1-72 hours.
- Medium/high torque compound
- Excellent brake modulation
- #1 selling pad for SCCA
- Temp range: 250-1000 F
The Blue 9012 is for sports car racing and rally applications requiring medium initial bite and effectiveness. Good general purpose pad for vehicles retaining the stock brake calipers. Number one selling pad in SCCA.
Note:: Do not use these pads on the street. It will not only be ineffective but it is also dangerous. The compound is designed to perform at higher temperature thresholds found at the track only.
$127.95FREE GROUND SHIPPING within USA! (Applies to the lower 48 states only & excludes AK, HI & PR)
Goodridge g-stop Stainless Steel Braided Brake Line kit for 1993-2001 Mazda FD3S RX-7, All. Complete direct bolt on kit replaces the lines for all four brakes.
Brand: Goodridge
Model: G-Stop Brake Hose Kits
Position: Front, Rear For Both Left & Right side.
Quantity: Complete Kit for all 4 brakes, includes hardware.
Fits Caliper: All
Line Construction: Braided stainless steel.
Application: All 1993-2002 Twin Turbo Mazda FD RX-7 (S6)
In Stock?: This item is normally in stock and ships within 1-72 hours.
Direct bolt-on brake hoses bring the ultimate in braking performance. They improve your braking performance for competition or everyday driving. Replacing the OE rubber hoses with Goodridge brake hoses reduces brake hose expansion for more consistent braking. Featuring stainless steel braided hose with fittings, these brake hoses are factory assembled for convenient installation.Goodridge stainless braided brakelines are the standard in professional motorsports where the ultimate in braking is required. Goodridge brake hoses increase braking efficiency and removes the spongey feel under arduous conditions. With an unmatched reputation backed by champions worldwide, there is no reason to choose anyone else. All Goodride brake hoses kits are for stock applications unless noted otherwise.
$128.95StopTech Sport Brake Rotors, Rear Pair, 5 LUG, for 1993-2001 Mazda FD3S RX-7. Available in X-Drilled only, Slotted only or Drilled & Slotted. Select from menu.
Brand: StopTech/Centric
Position: Rear, Includes Left & Right (matching pair, x2 rotors total)
Name/Rotor Identification: Rear 5 Lug Vented FD
Application: 1993-2001 TwinTurbo Mazda FC RX-7 (S6 w/ 13B-REW)
Lugs: 5
Vented?: Yes
Slotted/Drilled?: Yes (choose from menu)
In Stock?: Yes, slotted, drilled & slotted are normally in stock and ship within 1-72 hours. Drilled only is special order & take 3-14 days to ship.
StopTech® Sport Rotors are direct replacement discs for your factory brake system and stock calipers. They offer improved cooling as well as other advantages the competition doesn't offer. Slotting and/or cross-drilling helps wipe away the debris that forms between the pad and the disc, adds more bite, and can help the rear brakes to match the aesthetics of a front big brake kit. The rotor finish helps prevent glazing of the pads and improves wet and dry braking performance. Additionally, StopTech® Sport Rotors feature a durable black e-coating on the non-swept areas of the rotor to prevent corrosion. All StopTech® Sport Rotors are also available cryogenically treated to better align the molecular structure of the disc for enhanced durability and longer life. When so treated, they are known as StopTech Cryo® rotors.
Engineered to perform & look good:
StopTech® Sport Rotors look great behind custom wheels, improve the initial bite of the brake pads, and help wipe away the debris that forms between the pad and the disc. A set of StopTech® rear replacement Sport Rotors is a great way to match the aesthetics of a StopTech® Big Brake Kit.
E-Coated Finish
Most StopTech® Sport Rotors are finished with black e-coating on both sides of the hat, inside the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
Power Alloy Metallurgy
Power Alloy metallurgy is an exclusive feature of many StopTech® rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
Cooling Vane Design
Nearly all StopTech® 1-piece rotors have unique slot or hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
StopTech Sport Brake Rotors, Front Pair, 5 LUG, for 1993-2001 Mazda FD3S RX-7. Available in X-Drilled only, Slotted only or Drilled & Slotted. Select from menu.
Brand: StopTech/Centric
Position: Front, Includes Left & Right (matching pair, x2 rotors total)
Name/Rotor Identification: Front 5 Lug Vented FD
Application: 1993-2001 TwinTurbo Mazda FC RX-7 (S6 w/ 13B-REW)
Lugs: 5
Vented?: Yes
Slotted/Drilled?: Yes (choose from menu)
In Stock?: Yes, slotted, drilled & slotted are normally in stock and ship within 1-72 hours. Drilled only is special order & take 3-14 days to ship.
StopTech® Sport Rotors are direct replacement discs for your factory brake system and stock calipers. They offer improved cooling as well as other advantages the competition doesn't offer. Slotting and/or cross-drilling helps wipe away the debris that forms between the pad and the disc, adds more bite, and can help the rear brakes to match the aesthetics of a front big brake kit. The rotor finish helps prevent glazing of the pads and improves wet and dry braking performance. Additionally, StopTech® Sport Rotors feature a durable black e-coating on the non-swept areas of the rotor to prevent corrosion. All StopTech® Sport Rotors are also available cryogenically treated to better align the molecular structure of the disc for enhanced durability and longer life. When so treated, they are known as StopTech Cryo® rotors.
Engineered to perform & look good:
StopTech® Sport Rotors look great behind custom wheels, improve the initial bite of the brake pads, and help wipe away the debris that forms between the pad and the disc. A set of StopTech® rear replacement Sport Rotors is a great way to match the aesthetics of a StopTech® Big Brake Kit.
E-Coated Finish
Most StopTech® Sport Rotors are finished with black e-coating on both sides of the hat, inside the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
Power Alloy Metallurgy
Power Alloy metallurgy is an exclusive feature of many StopTech® rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
Cooling Vane Design
Nearly all StopTech® 1-piece rotors have unique slot or hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
Fast shipping and thoughtfull custoemer service. Laffy taffy happens to be my favorite thanks.
- Alexsandro M. Covington, VA...
Read More ->
You guys are an example to every Shop! MANY THANKS for all your help!
- Kenneth B of Mosta, Malta...
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.