Himni Racing

Made In USA. HR 2.50" Male/Female INTERLOCK V-Band Flange & Clamp kit. Includes (x2) matching flanges (one male w/ lip, one female with groove) & (x1) clamp. Used together as a pair for self alinement, increased sealing & smooth transition flange to flange connection. Outstanding quality, precision fit, durable, reusable & reliable. This item is normally in stock & ships within 1-72 hours.

- Brand: HIMN'I Racing
- Design: 2.5" INTERLOCK V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 2.50" Inch I.D. For 2.50" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2.50" Inch I.D., 3 1/16" OD (about 76mm) Lipped & grooved.
- Overall Thickness/Height Of Each Flange: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

For use with All small to mid frame Gar...

For use with All small to mid frame Gar...

For use with All small to mid frame Gar...

Made In USA. HR 2.50" Male/Female INTERLOCK V-Band Flange & Clamp kit. Includes (x2) matching flanges (one male w/ lip, one female with groove) & (x1) clamp. Used together as a pair for self alinement, increased sealing & smooth transition flange to flange connection. Outstanding quality, precision fit, durable, reusable & reliable. This item is normally in stock & ships within 1-72 hours.

- Brand: HIMN'I Racing
- Design: 2.5" INTERLOCK V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 2.50" Inch I.D. For 2.50" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2.50" Inch I.D., 3 1/16" OD (about 76mm) Lipped & grooved.
- Overall Thickness/Height Of Each Flange: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

Himni Racing Polyurethane FC RX-7 Motor...

Himni Racing Polyurethane FC RX-7 Motor...

Himni Racing Polyurethane FC RX-7 Motor...

Made In USA. HR 2.50" Male/Female INTERLOCK V-Band Flange & Clamp kit. Includes (x2) matching flanges (one male w/ lip, one female with groove) & (x1) clamp. Used together as a pair for self alinement, increased sealing & smooth transition flange to flange connection. Outstanding quality, precision fit, durable, reusable & reliable. This item is normally in stock & ships within 1-72 hours.

- Brand: HIMN'I Racing
- Design: 2.5" INTERLOCK V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 2.50" Inch I.D. For 2.50" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2.50" Inch I.D., 3 1/16" OD (about 76mm) Lipped & grooved.
- Overall Thickness/Height Of Each Flange: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

Master engine hardware kit. Replaces mo...

Master engine hardware kit. Replaces mo...

Master engine hardware kit. Replaces mo...

Made In USA. HR 2.50" Male/Female INTERLOCK V-Band Flange & Clamp kit. Includes (x2) matching flanges (one male w/ lip, one female with groove) & (x1) clamp. Used together as a pair for self alinement, increased sealing & smooth transition flange to flange connection. Outstanding quality, precision fit, durable, reusable & reliable. This item is normally in stock & ships within 1-72 hours.

- Brand: HIMN'I Racing
- Design: 2.5" INTERLOCK V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 2.50" Inch I.D. For 2.50" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2.50" Inch I.D., 3 1/16" OD (about 76mm) Lipped & grooved.
- Overall Thickness/Height Of Each Flange: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

Made in USA. The Himni Racing FC RX7 St...

Made in USA. The Himni Racing FC RX7 St...

Made in USA. The Himni Racing FC RX7 St...

Made In USA. HR 2.50" Male/Female INTERLOCK V-Band Flange & Clamp kit. Includes (x2) matching flanges (one male w/ lip, one female with groove) & (x1) clamp. Used together as a pair for self alinement, increased sealing & smooth transition flange to flange connection. Outstanding quality, precision fit, durable, reusable & reliable. This item is normally in stock & ships within 1-72 hours.

- Brand: HIMN'I Racing
- Design: 2.5" INTERLOCK V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 2.50" Inch I.D. For 2.50" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2.50" Inch I.D., 3 1/16" OD (about 76mm) Lipped & grooved.
- Overall Thickness/Height Of Each Flange: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

Master engine hardware kit. Replaces mo...

Master engine hardware kit. Replaces mo...

Master engine hardware kit. Replaces mo...

Made In USA. HR 2.50" Male/Female INTERLOCK V-Band Flange & Clamp kit. Includes (x2) matching flanges (one male w/ lip, one female with groove) & (x1) clamp. Used together as a pair for self alinement, increased sealing & smooth transition flange to flange connection. Outstanding quality, precision fit, durable, reusable & reliable. This item is normally in stock & ships within 1-72 hours.

- Brand: HIMN'I Racing
- Design: 2.5" INTERLOCK V-Band Flange & clamp kit.
- #1 Tube/Pipe Side: 2.50" Inch I.D. For 2.50" O.D. exhaust pipe/tube.
- #2 Face/Seal Side: 2.50" Inch I.D., 3 1/16" OD (about 76mm) Lipped & grooved.
- Overall Thickness/Height Of Each Flange: 1/2" inch (0.500")
- Material Type: Stainless Steel
- Clamp: Extreme duty, stainless steel w/ high heat lock nut.
- Welding characteristics: Excellent
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

HR V-Band Flanges & Clamp Kits are of the highest quality on the market today. Found on top race cars around the world, each vband mounting flange is precisely machined in the USA from raw USA billet stock to insure a perfect fit and leak-free seal. HR V-Flanges are designed to exceed requirements in the most demanding conditions including severe race, high heat & extreme stress applications. A huge verity of designs & sizes are available ranging from 1.50"-5.00". Made to industry fitment standards & torture tested with no warping, braking or loosing their seal.

Note:: V-Band sizes are determined by the size of downpipe/ tube side of the flange & not the face/sealing side. Though the tube side often dictates face side sizing, there are variations between the two depending on the flange. Meaning, not all "3.00 v-band flanges" have the same face/sealing side. Use our provided specs to insure proper fitment to your application. V-band flanges are most commonly used to connect an exhaust downpipe to a turbocharger turbine housing discharge/outlet, they are also the ideal choice for turbo compressor cover connection, intercooler/charge tube & exhaust pipe 'butt' connections. Simple 1 nut install & removal, reusable & no gasket required.

Note #2:: Not for use with BorgWarner Air Werks S series turbos. Please see our other v-band flanges with "BorgWarner" in the name.
Not for use with Garrett turbine housing using a recesses inner lip. Please see our 3" v-band flange with "LIP" in the name.

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.

Himni Racing Polyurethane FD RX-7 Motor...

Himni Racing Polyurethane FD RX-7 Motor...

Himni Racing Polyurethane FD RX-7 Motor...