Himni Racing logo

StopTech Brake Rotors Rear Slotted 4 LUG 86-88 Mazda FC RX7

Model: 126.45023SL/126.45023SR
Manufactured by: StopTech

$165.00
All Major Credit Cards
  • We accept PayPal
  • We accept MasterCard
  • We accept Visa
  • We accept AmEx
  • We accept Discover

StopTech Sport Slotted Brake Rotors, Rear, Pair, 4 LUG, for 1986-1988 Mazda FC3S RX-7

Brand: StopTech/Centric
Position: Rear, Includes Left & Right (matching pair, x2 rotors total)
Name/Rotor Identification: Rear 4 Lug Solid
Chart Reference: Line #2 (see chart below)
Application: 1986-1988 Non-Turbo Mazda FC RX-7 (S4)
Lugs: 4
Vented?: No, SOLID
Slotted?: Yes

::NOTE:: There are multiple brake caliper, rotor & pad configurations found on the 86-88 (S4) & 88-91 (S5) FC Mazda RX-7. Himni Racing offers every configuration & it is important that you select the correct parts for your specific application. Because brake swaps are so common on the FC today, it is not enough to buy your brakes based on what sub model RX-7 you have or what came on the car from the factory. Visual, detailed inspection of the brakes on your car, using the information we put together below is an absolute must. If you contact us because you need to exchange your brake parts, we are going to know that you didn’t do your homework. Don’t be THAT guy. If in doubt, email us & we will be happy to take care of it for you.

*Use the brake rotor chart to determine what rotors you need.
**Use the brake pad chart to determine the correct pads for your rotors.
***Pay close attention to #4 & #5 rear rotors. Though they use the same pad, they do not use the same caliper. Vented rotors cannot be used with solid rotor calipers or vice versa.

StopTech® Sport Rotors are direct replacement discs for your factory brake system and stock calipers. They offer improved cooling as well as other advantages the competition doesn't offer. Slotting and/or cross-drilling helps wipe away the debris that forms between the pad and the disc, adds more bite, and can help the rear brakes to match the aesthetics of a front big brake kit. The rotor finish helps prevent glazing of the pads and improves wet and dry braking performance. Additionally, StopTech® Sport Rotors feature a durable black e-coating on the non-swept areas of the rotor to prevent corrosion. All StopTech® Sport Rotors are also available cryogenically treated to better align the molecular structure of the disc for enhanced durability and longer life. When so treated, they are known as StopTech Cryo® rotors.

Engineered to perform & look good:
StopTech® Sport Rotors look great behind custom wheels, improve the initial bite of the brake pads, and help wipe away the debris that forms between the pad and the disc. A set of StopTech® rear replacement Sport Rotors is a great way to match the aesthetics of a StopTech® Big Brake Kit.

E-Coated Finish
Most StopTech® Sport Rotors are finished with black e-coating on both sides of the hat, inside the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.

Power Alloy Metallurgy
Power Alloy metallurgy is an exclusive feature of many StopTech® rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.

Cooling Vane Design
Nearly all StopTech® 1-piece rotors have unique slot or hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.