Direct bolt on turbo upgrade for the Dodge Cummins 5.9L diesel engine. Genuine Air Werks by Borg Warner, S300G turbo charger upgrade for increased performance, HP, Torque, towing & hauling. Internally wastegated & ships ready to go. This turbo fits a wide variety of Dodge trucks, models & years with both automatic & manual transmissions.
Please note the picture with chart above to insure fitment with your application.
$1,089.00"This turbo has flow capabilities ranging from 200 to 580 HP. Genuine Air Werks by Borg Warner, S200SX turbo charger with 46mm compressor wheel inducer. "aka S246, S200SX-46, S246SX & S246-SX" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side)
- Wheel: 46mm Inducer / 70mm Exducer w/ Extended Tip Technology
- Housing: 3.00" air inlet / 2.50" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 70mm Inducer / 61mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: T4 Divided twin scroll / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .83 (default) Also Available in 1.00, 1.15 & 1.22 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT) Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
$632.00This turbo has flow capabilities ranging from 200 to 580 HP. Genuine Air Werks by Borg Warner, S200SX turbo charger with 50mm compressor wheel inducer, also known as the S250, S200SX-50, S250SX & S250-SX. This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side)
- Wheel: 50mm Inducer / 70mm Exducer w/ Extended Tip Technology
- Housing: 3.00" air inlet / 2.50" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 70mm Inducer / 61mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: T4 Divided twin scroll / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: 1.09 (default) Also Available in 1.00, 1.15 & 1.22 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire.
"This turbo has flow capabilities ranging from 200 to 580 HP. Genuine Air Werks by Borg Warner, S200SX turbo charger with 51mm compressor wheel inducer "aka S251, S200SX-51, S251SX & S251-SX" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side)
- Wheel: 51mm Inducer / 70mm Exducer w/ Extended Tip Technology
- Housing: 3.00" air inlet / 2.50" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 70mm Inducer / 61mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: T4 Divided twin scroll / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .83 (default) Also Available in 1.00, 1.15 & 1.22 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
This turbo has flow capabilities ranging from 200 to 580 HP. Genuine Air Werks by Borg Warner, S200SX turbo charger with 56mm compressor wheel inducer, also known as the S256, S200SX-56, S256SX & S256-SX. This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side)
- Wheel: 56mm Inducer / 76.1mm Exducer w/ Extended Tip Technology
- Housing: 3.00" air inlet / 2.50" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 70mm Inducer / 61mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: T4 Divided twin scroll / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: 1.22 (default) Also Available in 1.00, 1.15 & 1.22 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire.
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
"This turbo has flow capabilities ranging from 500 to 800 HP. Genuine Air Werks by Borg Warner, S300SX3 turbo charger with 60mm compressor wheel inducer. "aka 83-75, S360, S300SX3-60, S360SX & S360-SX3" Available with a undivided or twin scroll (divided) turbine housing. (select from menu & note picture for details) This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output. This turbo is comparable to the GT3582R but is capable of flowing more air at higher pressures (46.5 psi)
NOTE:: This turbo is the Type A (straight comp outlet) with a T4 .91 A/R DIVIDED turbine housing by default & straight charge pipe outlet, as seen in the picture.
::Compressor:: (cold side) Over 65 lb/min.
- Wheel: 60mm Inducer / 83.5mm Exducer w/ Extended Tip Technology
- Housing: Large 4.00" ported anti-surge air inlet / 3.00" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 76.1mm Inducer / 68mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: T4 Divided twin scroll / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .91 Divided (default) Also Available in:
.88 Undivided & 1.00 Divided A/R's
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
"This turbo has flow capabilities ranging from 500 to 830 HP. Genuine Air Werks by Borg Warner, S300SX3 turbo charger with 66mm compressor wheel inducer. "aka 91-79, S366, S300SX3-66, S366SX & S366-SX3" Available with a undivided or twin scroll (divided) turbine housing. (select from menu & note picture for details) This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high horsepower output good for over 45 psi.
NOTE:: This turbo is the Type A (straight comp outlet) with the T4 .91 A/R turbine housing by default & straight charge pipe outlet, as seen in the picture.
::Compressor:: (cold side) Over 78 lb/min.
- Wheel: 66mm Inducer / 91.4mm Exducer w/ Extended Tip Technology
- Housing: Large 4.00" ported anti-surge air inlet / 3.00" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 80mm Inducer / 73mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: T4 Divided twin scroll / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .91 Divided (default) Also Available in .88 Undivided A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
"This turbo has flow capabilities ranging from 400 to 800 HP. Genuine Air Werks by Borg Warner, S300SX3 turbo charger with 60mm compressor wheel inducer. "aka S360, S300SX3-60, S360SX & S360-SX3" Available with a undivided or twin scroll (divided) turbine housing. (select from menu & note picture for details) This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
NOTE:: This turbo is the Type B (90 degree comp outlet) with the T4 Undivided .88 A/R turbine housing by default & 90 degree charge pipe outlet, as seen in the picture.
::Compressor:: (cold side)
- Wheel: 60mm Inducer / 83.5mm Exducer w/ Extended Tip Technology
- Housing: Large 4.00" ported anti-surge air inlet / 90 degree 3.00" charge pipe outlet
::Turbine:: (hot side)
- Wheel: 76.1mm Inducer / 68mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing Option #1: (T04) T4 .88 A/R Undivided w/ V-band downpipe exist
- Housing Option #2: (T04) T4 .91 A/R Divided w/ V-band downpipe exist
- Housing Option #3: (T04) T4 1.00 A/R Divided w/ V-band downpipe exist
- Downpipe v-band flange size: 3.12" ID, 4.21" ID (Use flange kit part number R153501-1 or R153001-1 found on our site)
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
"This turbo has flow capabilities ranging from 400 to 800 HP. Genuine Air Werks by Borg Warner, S300SX3 turbo charger with 63mm compressor wheel inducer. "aka 88/75, S363, S300SX3-63, S363SX & S363-SX3" Available with a undivided or twin scroll (divided) turbine housing. (select from menu & note picture for details) This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output. Comparable in size to the T04Z, PT67 & GT37R.
NOTE:: This turbo is the Type B (90 degree comp outlet) with the T4 Undivided .88 A/R turbine housing by default & 90 degree charge pipe outlet, as seen in the picture.
::Compressor:: (cold side)
- Wheel: 63mm Inducer / 88 mm Exducer w/ Extended Tip Technology
- Housing: Large 4.00" ported anti-surge air inlet / 3.00" 90 degree charge pipe outlet
::Turbine:: (hot side)
- Wheel: 76.1mm Inducer / 68mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: (T04) T4 Undivided / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .88 (default) Also Available in .91 divided & 1.00 divided A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
"This turbo has flow capabilities ranging from 400 to 800 HP. Genuine Air Werks by Borg Warner, S300SX3 turbo charger with 66mm compressor wheel inducer. "aka S366, S300SX3-66, S366SX & S366-SX3" Available with a undivided or twin scroll (divided) turbine housing. (select from menu & note picture for details) This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
NOTE:: This turbo is the Type B (90 degree comp outlet) with the T4 divided turbine housing by default & 90 degree charge pipe outlet, as seen in the picture.
::Compressor:: (cold side)
- Wheel: 66mm Inducer / 91.4mm Exducer w/ Extended Tip Technology
- Housing: Large 4.00" ported anti-surge air inlet / 3.00" 90 degree charge pipe outlet
::Turbine:: (hot side)
- Wheel: 79.7mm Inducer / 73mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: (T04) T4 divided or undivided / 3.00" V-band flange downpipe discharge (3.12" ID, 4.21" ID, use flange kit 3501 found on our site)
- A/R: .91 divided (default) Also Available with a undivided .88 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
"This turbo has flow capabilities ranging from 500 to 800 HP. Genuine Air Werks by Borg Warner, S400SX3 turbo charger with 71mm compressor wheel inducer. "aka S471 (T4) S400SX3-71, S471SX & S471-SX3" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side) Over 88 lb/min
- Wheel: 71.4mm Inducer / 100.8mm Exducer w/ Extended Tip Technology
- Housing: (select from menu)
#1. 5.00" ported anti-surge air inlet / 3.50" V-band flange charge pipe outlet.
#2 Large High Flow Race Cover w/ 5.50" air inlet/ 3" slip-on charge pipe outlet with ballistic attenuator. (has tapered funnel/velocity stack fitted on the inside of the air inlet)
::Turbine:: (hot side)
- Wheel: 83.5mm Inducer / 74mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: (T04) T4 Divided twin scroll / 4.00" V-band flange downpipe discharge
- A/R: 1.10 (default) Also Available in .90, 1.00 & 1.25 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
"This turbo has flow capabilities ranging from 500 to 800 HP. Genuine Air Werks by Borg Warner, S400SX3 turbo charger with 75mm compressor wheel inducer. "aka S475 (T4) S400SX3-75, S475SX & S475-SX3" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side) Over 98 lb/min
- Wheel: 75mm Inducer / 100.8mm Exducer w/ Extended Tip Technology
- Housing: (select from menu)
#1. 5.00" ported anti-surge air inlet / V-band flange charge pipe outlet.
#2 Large High Flow Race Cover w/ 5.50" air inlet/ 3" slip-on charge pipe outlet with ballistic attenuator. (has tapered funnel/velocity stack fitted on the inside of the air inlet)
::Turbine:: (hot side)
- Wheel: 83.5mm Inducer / 74mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: (T04) T4 Divided twin scroll / 4.00" V-band flange downpipe discharge
- A/R: 1.10 (default) Also Available in .90, 1.00 & 1.25 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
"This turbo has flow capabilities ranging from 500 to 1050 HP. Genuine Air Werks by Borg Warner, S400SX4 turbo charger with 71mm compressor wheel inducer. "aka S471 (T6) S400SX4-71, S471SX & S471-SX4" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side) Over 88 lb/min
- Wheel: 71.4mm Inducer / 100.8mm Exducer w/ Extended Tip Technology
- Housing: (select from menu)
#1. 5.00" ported anti-surge air inlet / V-band flange charge pipe outlet.
#2 Large High Flow Race Cover w/ 5.50" air inlet/ 3" slip-on charge pipe outlet with ballistic attenuator. (has tapered funnel/velocity stack fitted on the inside of the air inlet)
::Turbine:: (hot side)
- Wheel: 95.7mm Inducer / 88mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: Large T6 Divided twin scroll / 5.00" V-band flange downpipe discharge
- A/R: 1.32
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
This the S400SX4-75 with the larger 88mm turbine wheel & with the 1.32 A/R turbine housing.
"Flow capabilities ranging from 500 to 1050 HP. Genuine Air Werks by Borg Warner, S400SX4 turbo charger with 75mm compressor wheel inducer. "aka S475 (T6) S400SX3-75, S475SX & S475-SX3" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side) Over 98 lb/min
- Wheel: 75mm Inducer / 100.8mm Exducer w/ Extended Tip Technology
<
- Housing: (select from menu)
#1. 5.00" ported anti-surge air inlet / V-band flange charge pipe outlet.
#2 Large High Flow Race Cover w/ 5.50" air inlet/ 3" slip-on charge pipe outlet with ballistic attenuator. (has tapered funnel/velocity stack fitted on the inside of the air inlet)
::Turbine:: (hot side)
- Wheel: 95.7mm Inducer / 88mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: Large T6 Divided twin scroll inlet/ 5.00" V-band flange downpipe discharge
- A/R: 1.32 A/R
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
This turbo is the S400SX4-75 with the smaller 74mm turbine wheel & with more turbine housing sizes available.
"Flow capabilities ranging from 500 to 1050 HP. Genuine Air Werks by Borg Warner, S400SX4 turbo charger with 75mm compressor wheel inducer & 74mm turbine wheel. "aka S475 (T6) S400SX3-75, S475SX & S475-SX3" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side) Over 98 lb/min
- Wheel: 75mm Inducer / 100.8mm Exducer w/ Extended Tip Technology
<
- Housing: (select from menu)
#1. 5.00" ported anti-surge air inlet / V-band flange charge pipe outlet.
#2 Large High Flow Race Cover w/ 5.50" air inlet/ 3" slip-on charge pipe outlet with ballistic attenuator. (has tapered funnel/velocity stack fitted on the inside of the air inlet)
::Turbine:: (hot side)
- Wheel: 83.5mm Inducer / 74mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: Large T6 inlet/ 5.00" V-band flange downpipe discharge
- A/R: 1.10 (default) Also available with .90, 1.00 & 1.25 A/R (select from menu)
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
This turbo receives FREE SHIPPING within the continental USA & $30 INSTANT shop rebate.
Excludes AK, HI, VI & PR. Limited time offer. On select turbos only.
"This turbo has flow capabilities ranging from 750 to 1250 HP. Genuine Air Werks by Borg Warner, S400SX4 turbo charger with 80mm compressor wheel inducer. "aka S480 S400SX4-80, S480SX & S480-SX4" This turbo utilizes the BorgWarner / AirWerks "S" generation compressor wheel with Extended Tip Technology for the ultimate in aerodynamics, low RPM spool-up & high RPM horsepower output.
::Compressor:: (cold side) Over 120 lb/min.
- Wheel: 80.3mm Inducer / 115.8mm Exducer w/ Extended Tip Technology
- Housing: Large 5.50" ported anti-surge air inlet / 3.00" slip on charge pipe outlet
::Turbine:: (hot side)
- Wheel: 96mm Inducer / 88mm Exducer (Made of Inconel 713 for high-temperature operation)
- Housing: Large T6 Divided twin scroll / 5.00" V-band flange downpipe discharge
- A/R: 1.32
::Center Section::
- Oil Cooled
- Severe-Duty Journal Bearing System (rebuildable platform with service kit found on our site)
Note:: ALL of our BorgWarner & AirWerks turbochargers come Fully Balanced from the factory & have the Manufacturers 1 year (12 month) Warranty. These turbos are NOT the lower quality third party turbos that have been re-badged / re-named. They are 100% authentic BorgWarner / AirWerks turbos true & through.
The BorgWarner AirWerks S Series turbos aren't to be confused with the old T series turbos. These AirWerks units are carefully developed turbos for high performance applications. They are 20+ years more advanced than T turbos & are found on many of the top high performance street & race cars world wide. Direct-Fit interchange compatibility with T series turbos, the S series turbos spool much faster & yield more HP. Extremely durable, reliable, cost effective with superior performance & made in USA.
Extended Tip Technology (ETT)
Select BorgWarner AirWerks turbos employ BorgWarner "S" generation compressor wheels that incorporate extended tip technology. This compressor wheel design feature promotes greater airflow using low inertia wheel that performs like a wheel of greater size & mass. Extended tip technology enables the user to have faster spool-up at lower engine speeds, while providing the boost for the powerful top-end performance that turbocharger enthusiasts have come to desire."
Stainless steel replacement V-band clamp is designed to be used with our Borg Warner S200SX & S300SX3 V-band flange only. (fits the 2.50", 3.00", 3.50" & 4.00" flanges) Not compatible with any other flange. Includes lock nut. High quality & durable, made in the USA.
When used with our 200/S300 v-flange, this clamp fits the following turbos.
S200SX
S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300SX3
S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)
Or by part number, fits the following: 177258, 177267, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284 and more
$25.95Stainless steel replacement V-band clamp is designed to be used with our Borg Warner S200SX & S300SX3 V-band flange only. (fits the 2.50", 3.00", 3.50" & 4.00" flanges) Not compatible with any other flange. Includes lock nut. High quality & durable, made in the USA.
When used with our 200/S300 v-flange, this clamp fits the following turbos.
S200SX
S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300SX3
S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)
Or by part number, fits the following: 177258, 177267, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284 and more
$25.95Stainless steel replacement V-band clamp is designed to be used with our Borg Warner S200SX & S300SX3 V-band flange only. (fits the 2.50", 3.00", 3.50" & 4.00" flanges) Not compatible with any other flange. Includes lock nut. High quality & durable, made in the USA.
When used with our 200/S300 v-flange, this clamp fits the following turbos.
S200SX
S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300SX3
S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)
Or by part number, fits the following: 177258, 177267, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284 and more
$25.95Stainless steel replacement V-band clamp is designed to be used with our Borg Warner S200SX & S300SX3 V-band flange only. (fits the 2.50", 3.00", 3.50" & 4.00" flanges) Not compatible with any other flange. Includes lock nut. High quality & durable, made in the USA.
When used with our 200/S300 v-flange, this clamp fits the following turbos.
S200SX
S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300SX3
S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)
Or by part number, fits the following: 177258, 177267, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284 and more
$25.95Stainless steel replacement V-band clamp is designed to be used with our Borg Warner S200SX & S300SX3 V-band flange only. (fits the 2.50", 3.00", 3.50" & 4.00" flanges) Not compatible with any other flange. Includes lock nut. High quality & durable, made in the USA.
When used with our 200/S300 v-flange, this clamp fits the following turbos.
S200SX
S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300SX3
S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)
Or by part number, fits the following: 177258, 177267, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284 and more
$25.95Garrett 40mm GVW-40 External Wastegate ...
$317.00Stainless steel replacement V-band clamp is designed to be used with our Borg Warner S200SX & S300SX3 V-band flange only. (fits the 2.50", 3.00", 3.50" & 4.00" flanges) Not compatible with any other flange. Includes lock nut. High quality & durable, made in the USA.
When used with our 200/S300 v-flange, this clamp fits the following turbos.
S200SX
S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300SX3
S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)
Or by part number, fits the following: 177258, 177267, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284 and more
$25.95Made in USA. The Himni Racing FC RX7 St...
$215.00Made in USA. The Himni Racing FC RX7 St...
$317.00Stainless steel replacement V-band clamp is designed to be used with our Borg Warner S200SX & S300SX3 V-band flange only. (fits the 2.50", 3.00", 3.50" & 4.00" flanges) Not compatible with any other flange. Includes lock nut. High quality & durable, made in the USA.
When used with our 200/S300 v-flange, this clamp fits the following turbos.
S200SX
S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300SX3
S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)
Or by part number, fits the following: 177258, 177267, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284 and more
$25.95Master engine hardware kit. Replaces mo...
$78.00Master engine hardware kit. Replaces mo...
$317.00Stainless steel replacement V-band clamp is designed to be used with our Borg Warner S200SX & S300SX3 V-band flange only. (fits the 2.50", 3.00", 3.50" & 4.00" flanges) Not compatible with any other flange. Includes lock nut. High quality & durable, made in the USA.
When used with our 200/S300 v-flange, this clamp fits the following turbos.
S200SX
S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300SX3
S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)
Or by part number, fits the following: 177258, 177267, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284 and more
$25.95Himni Racing Polyurethane FC RX-7 Motor...
$98.00Himni Racing Polyurethane FC RX-7 Motor...
$317.00Stainless steel replacement V-band clamp is designed to be used with our Borg Warner S200SX & S300SX3 V-band flange only. (fits the 2.50", 3.00", 3.50" & 4.00" flanges) Not compatible with any other flange. Includes lock nut. High quality & durable, made in the USA.
When used with our 200/S300 v-flange, this clamp fits the following turbos.
S200SX
S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300SX3
S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)
Or by part number, fits the following: 177258, 177267, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284 and more
$25.95For use with All small to mid frame Gar...
$78.00For use with All small to mid frame Gar...
$317.00Stainless steel replacement V-band clamp is designed to be used with our Borg Warner S200SX & S300SX3 V-band flange only. (fits the 2.50", 3.00", 3.50" & 4.00" flanges) Not compatible with any other flange. Includes lock nut. High quality & durable, made in the USA.
When used with our 200/S300 v-flange, this clamp fits the following turbos.
S200SX
S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300SX3
S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)
Or by part number, fits the following: 177258, 177267, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284 and more
$25.95Himni Racing Polyurethane FD RX-7 Motor...
$99.90Himni Racing Polyurethane FD RX-7 Motor...
$317.00Stainless steel replacement V-band clamp is designed to be used with our Borg Warner S200SX & S300SX3 V-band flange only. (fits the 2.50", 3.00", 3.50" & 4.00" flanges) Not compatible with any other flange. Includes lock nut. High quality & durable, made in the USA.
When used with our 200/S300 v-flange, this clamp fits the following turbos.
S200SX
S246 (S200SX-46), S250 (S200SX-50), S251 (S200SX-51), S256 (S200SX-56)
S300SX3
S360 (SX300SX-60), S363 (S300SX-63), S366 (S300SX-66)
Or by part number, fits the following: 177258, 177267, 177257, 177268, 177281, 177275, 177272, 177280, 177283, 177284 and more
$25.95Master engine hardware kit. Replaces mo...
$84.00Master engine hardware kit. Replaces mo...
$317.00Himni Racing Polyurethane FC RX-7 Motor...
Himni Racing Polyurethane FD RX-7 Motor...
I can't thank Himni enough for your awesome customer service and technical help. The turbo parts fit perfect. My new favorite turbo shop!
- Chris Y.......
Read More ->
I LOVED THE SERVICE YOU GUYS GAVE ME WITH MY NEW WASTE GATE! TRULY HELPFUL AND GENEROUS. LOOK FORWARD TO BUYING MORE.
- Sheryl P. CasulA, Australia...
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.