Note:: Does Not require the purchase of any extra parts. Installs using both stock aluminum & steel brackets. Or With 2 steel brackets if you have changed from OEM. (select from menu)
Engine Stability: Up to 650 HP (OEM mounts jump around at even 100 HP)
Vibrations to Chases & Driver: No
Limited Life Time Warranty: Yes
- Less engine movement compared to MazdaSpeed competition mounts? Yes
- Fits: 93-00 Mazda FD3S RX-7.
***Effective as of 4/10/2010, HR polyurethane motor mounts are updated to absorb all vibrations** They hold a large amount of HP with no vibrations transmitted to the driver. This is only part of what separates the HR Poly Motor Mounts all others. Over many years, Himni Racing has tested countless configurations, materials & designs to archive the right motor mount balance of Holding The Engine In Place with little to no vibrations transmitted to the chases/driver. This makes the HR Poly Mounts KING. There is no longer any reason to vibrate you & your car in order to hold your engine steady.
Each mount set is machined, then hand tailored. This allows the engine to sit in the bay as it would with the stock mounts, so no other modifications are needed. Bolts into place with basic tools & comes with strong metric 8.8 grade mounting hardware, a decal & installation is very simple. The HR FD 13B-REW rotary engine mounts are the real deal & are found on high performance RX-7's worldwide.
The 'feel' they provide, even under light normal driving, is actually better then new OEM mounts by 10 fold. It's a more precise, realistic & in tune feel with the engine. There's a clean 'blip' feel off idle, then smooth all the way to redline. Good for 650 + WHP. Less then 1/4" of engine movement under full throttle & hard loads. Dyno testing has proved ZERO movement on a 472 WHP car. The new Himni Racing Polyurethane Engine Mount are the best choice to combine smooth operation & extreme engine stability.
Himni Racing is one of the very 1st company's to bring solid & poly motor mounts to the rotary community many, many years ago. This insures that you will get the very best product, from the originators. HIMNI mounts will greatly reduce the engine from "rocking" back & forth in the engine bay. This rock becomes more extreme during spirited driving & racing situations. Our mounts provide a much more potent launch, increased torque & HP transmitted to the wheels & eliminated missed shifts. These can be easily installed in an average of a half hour, without removing the engine.
Comes With & Features:
- Made In The USA
- Himni Racing High Performance Polyurethane Motor Mount Set (Replaces both OEM mounts)
- 8.8 Grade Metric Mounting Hardware
- Good for 650+ WHP
- Smooth with no Vibrations.
- Made In House by the Pros @ HR
- Machined, Then Hand Tailored to Guarantee Perfect Fitment
- Easy Half Hour Installation (engine does not need to be removed)
- Installs using both stock aluminum & steel brackets.
- No Other Parts Required (Direct Bolt on)
- Eliminates the need for an engine torque brace.
- Extremely long life (capable of lasting a lifetime)
- Oil & Chemical Resistant
- Step by Step Installation Instructions
- FREE Rotor Decal
- Superior to new OEM & Mazdaspeed comp. mounts.
Customers who bought this product also purchased...