Made In USA. Stainless Steel 3.00" I.D. 2 Bolt exhaust gasket. General purpose use. Also fits our 2 Bolt To V-band adapter/converter flange & all 86-91 Mazda FC3S RX-7 2 bolt exhaust flanges. High quality, made in USA, reusable design does not require a new gasket each time the mating surfaces are separated.
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Bolt Spacing: 3 7/8" measured from Center To Center of each hole with over-sized hole space on each side.
3 Bolt, 3 inch ID gasket for use with our 3 Bolt, 3" ID flange. Made from thick stainless steel. Universal fitment with many common collectors & turbos.
$10.65Made In USA. Stainless Steel 3.00" I.D. T4 4 Bolt On-Center turbo downpipe gasket. Fits T4/T04 turbochargers using an on center turbine/exhaust housing with a 3 inch 4 bolt outlet/exist/discharge. High quality, made in USA, reusable design does not require a new gasket each time the mating surfaces are separated.
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Bolt Spacing: Please see picture
Made In USA. Stainless Steel T25/T28/GT25/GT28 turbo inlet gasket. For use between the turbocharger & the exhaust manifold/header. High quality, USA made, reusable design does not require a new gasket each time the mating surfaces are separated.
Fits all turbos with a T25, T28, GT25, GT28 type turbine housing.
>Including:
T25, T28, GT25, GT28, GT25R, GT2554R, GT2560R, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GT3071R-WG, GTX2860R, GTX2863R, GTX2867R, GT3076R-WG, S200, etc
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Bolt Spacing: 3.25" measured like an X from Center To Center of each hole.
Made In USA. Stainless Steel T25/T28/GT25/GT28 internal waste gate turbo downpipe/discharge gasket. For use between the turbocharger exhaust/turbine housing exist/outlet & the exhaust down pipe. High quality, USA made, reusable design does not require a new gasket each time the mating surfaces are separated.
Fits all turbos with a T25 / T28 / GT25 / GT28 internal waste gate type turbine housing.
>Including:
T25, T28, GT25, GT28, GT25R, GT2554R, GT2560R, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GT3071R-WG, GTX2860R, GTX2863R, GTX2867R, GT3076R-WG, S200, etc.
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Bolt Spacing: See Picture
Made In USA. Stainless Steel T3, T3/T4 (T31) DIVIDED, turbo inlet gasket. For use between the turbocharger 4 bolt inlet & the exhaust manifold/header. High quality, USA made, reusable design does not require a new gasket each time the mating surfaces are separated.
Fits all turbos with a T3 divided turbine housing.
>Including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Bolt Spacing: See Picture
Made In USA. Stainless Steel UNDIVIDED T3, T3/T4 (T31) turbo inlet gasket. For use between the turbocharger inlet & the exhaust manifold/header. High quality, USA made, reusable design does not require a new gasket each time the mating surfaces are separated.
Fits all turbos with a T3 undivided turbine housing.
>Including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Bolt Spacing: See Picture
Stainless Steel T3/GT 2.50" 4 Bolt downpipe discharge gasket. For use between the turbocharger turbine exist/outlet & the exhaust down pipe. High quality USA made, reusable design does not require a new gasket each time the mating surfaces are separated.
Fits all turbos with the smaller 2.50" T3/GT 4-Bolt turbine exist/discharge .
Including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Bolt Spacing: See Picture
Note:: There are two different sizes of GT 4 Bolt turbine/exhaust housings. The smaller 2 1/2 inch (for 2.50" downpipes) and the larger 3 inch. (for 3.00" downpipes) This gasket is for the smaller of the two. See part number: HRGA018 in our cataloger for the 3.00" version.
$9.25Stainless Steel T3/GT 3.000" 4 Bolt downpipe discharge gasket. For use between the turbocharger turbine exist/outlet & the exhaust down pipe. High quality USA made, reusable design does not require a new gasket each time the mating surfaces are separated.
Fits all turbos with the smaller 3.00" T3/GT 4-Bolt turbine exist/discharge .
Including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Bolt Spacing: See Picture
Note:: There are two different sizes of GT 4 Bolt turbine/exhaust housings. The smaller 2 1/2 inch (for 2.50" downpipes) and the larger 3 inch. (for 3.00" downpipes) This gasket is for the larger of the two. See part number: HRGA012 in our cataloger for the 2.50" version.
$10.25Stainless Steel T3 5 Bolt (aka Ford Style) downpipe discharge gasket. For use between the turbocharger turbine exist/outlet & the exhaust down pipe. High quality, USA made, reusable design does not require a new gasket each time the mating surfaces are separated.
Fits all turbos using a T3 5-Bolt exist turbine housing.
Including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Bolt Spacing: See Picture
Stainless Steel DIVIDED T4 / T04 turbo inlet gasket. For use between the turbocharger inlet & the exhaust manifold/header. High quality, USA made, reusable design does not require a new gasket each time the mating surfaces are separated.
Fits all turbos using a T4 divided turbine housing.
>Including:
T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T70, T04Z, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT40, GT4082, GT4088, GT4088R, GT4094, GT4094R, GT42, GT42R, GT4294, GT4294R, GT4202, GT42RS, GT4202R, GTX42, GTX4294, GTX4294R, GTX4202, GTX4202R, GT45, GT45R, GT4508, GT4508R, GTX45, GT45R, GTX45, GT4508, GTX4508R, S200SX, S248, S250, S251R, S256, S300SX3, S360, S363, S366, S400SX3, S471 T4, S475 T4, GT-K 850, GT-K 1000, Billet GT-K750, Billet GT-K850, Billet GT-K1050, etc.
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Bolt Spacing: See Picture
Stainless Steel UNDIVIDED T4 / T04 turbo inlet gasket. For use between the turbocharger inlet & the exhaust manifold/header. High quality, USA made, reusable design does not require a new gasket each time the mating surfaces are separated.
Fits all turbos with a T4 undivided turbine housing.
>Including:
T4, T04, T04B, T04E, T04S, 60-1, T04R, T66, T67, T70, T04Z, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT40, GT4082, GT4088, GT4088R, GT4094, GT4094R, GT42, GT42R, GT4294, GT4294R, GT4202, GT42RS, GT4202R, GTX42, GTX4294, GTX4294R, GTX4202, GTX4202R, GT45, GT45R, GT4508, GT4508R, GTX45, GT45R, GTX45, GT4508, GTX4508R, S200SX, S248, S250, S251R, S256, S300SX3, S360, S363, S366, S400SX3, S471 T4, S475 T4, GT-K 850, GT-K 1000, Billet GT-K750, Billet GT-K850, Billet GT-K1050 etc.
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Bolt Spacing: See Picture
Stainless Steel DIVIDED T6 (aka diesel,TA45) turbo inlet gasket. For use between the turbocharger inlet & the exhaust manifold/header outlet. High quality, USA made, reusable design does not require a new gasket each time the mating surfaces are separated.
Fits all turbos using a T6 divided turbine housing.
>Including:
GT42, GT42R, GT4294, GT4294R, GT4202, GT42RS, GT4202R, GTX42, GTX4294, GTX4294R, GTX4202, GTX4202R, GT47, GT47R, GT4708, GT4708R, GTX47, GTX4708, GTX4708R, GT4718, GT4718R, GTX4718, GTX4718R, GT55, GT55R, GT5533, GT5533R, GTX55, GTX5518, GTX5518R w/ 81.1mm/84.8mm/85.8mm/87.8mm, GTX5533, GTX5533R w/ 91mm/94mm, S400/S400SX/S400SX4, S471/S471SX, S475/S475SX, S480, S480SX, S500, S510, etc.
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Bolt Spacing: See Picture
Stainless Steel UNDIVIDED T6 turbo inlet gasket. For use between the turbocharger inlet & the exhaust manifold/header outlet. High quality, USA made, reusable design does not require a new gasket each time the mating surfaces are separated.
Fits all turbos with a T6 undivided turbine housing.
>Including:
GT42, GT42R, GT4294, GT4294R, GT4202, GT42RS, GT4202R, GTX42, GTX4294, GTX4294R, GTX4202, GTX4202R, GT47, GT47R, GT4708, GT4708R, GTX47, GTX4708, GTX4708R, GT4718, GT4718R, GTX4718, GTX4718R, GT55, GT55R, GT5533, GT5533R, GTX55, GTX5518, GTX5518R w/ 81.1mm/84.8mm/85.8mm/87.8mm, GTX5533, GTX5533R w/ 91mm/94mm, S400/S400SX/S400SX4, S471/S471SX, S475/S475SX, S480, S480SX, S500, S510, etc.
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Bolt Spacing: See Picture
TiAL 38mm External Wastegate Gasket fits TiAL 35mm, 38mm, F38 2 Bolt waste gates & Turbonetics Deltagate. Reusable & made of stainless steel. Very durable & does not blow out like other gaskets. Used on both gate inlet (manifold side) & outlet. (dump tube side)
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
TiAL 46mm (F46) External Wastegate Gasket, 4 Bolt, Reusable & made of stainless steel. Very durable & does not blow out like other gaskets. Used on both gate inlet (manifold side) & outlet. (dump tube side)
Material: Stainless Steel
Reusable?: Yes
Seal Type: Extreme heat rolled-lip
Turbo oil feed/ inlet, gasket for all large frame GT & T series turbos using a 2 Bolt oil inlet. Composite leak-free sealing, works perfect with our T & BIG GT series oil feed/inlet flanges.
Fits all large frame GT, T, & S series turbos w/ 2 Bolt oil inlet including:
- T3, T3/T4, T3/T04E, T04B, T04E, T04S, 60-1, 62-1, T04R, T04Z, T66, T67, T70, T88
- GT3788R, GT40, GT40R, GT42, GT42R, GT4294R, GT4202R, GTX4294R, GTX4202R, GT45, GT45R, GT4508R, GTX45R, GTX4508R, GT47, GT47R, GT4708R, GT4718R, GT55, GT55R, GTX5518R, GT5533R
Note:: This item is not used oil turbos that have a threaded oil feed/inlet port.
$3.09Turbo oil return, drain, outlet gasket for all large frame GT & T series turbos. Composite leak-free sealing, works perfect with our T & BIG GT series oil drain/return flanges.
Fits all large frame GT, T, S & EFR series turbos including:
- T3, T3/T4, T3/T04E, T04B, T04E, T04S, 60-1, 62-1, T04R, T04Z, T66, T67, T70, T88
- GT3788R, GT40, GT40R, GT42, GT42R, GT4294R, GT4202R, GTX4294R, GTX4202R, GT45, GT45R, GT4508R, GTX45R, GTX4508R, GT47, GT47R, GT4708R, GT4718R, GT55, GT55R, GTX5518R, GT5533R
- S200SX, S248, S250, S251R, S256, S300SX3, S360, S363, S366, S400SX3, S471 T4, S475 T4, S400SX4, S471 T6, S475 T6, S480, S500, S510
- EFR6255, EFR6258, EFR6758, EFR7064, EFR7670, EFR8374, EFR9180
Note:: For small frame GT series turbos, (GT15-GT35R) use oil return gasket in our catalog named "GT & T25/T28" gasket.
$1.99Turbo oil return, drain, outlet gasket for small-mid frame GT & T25/T28 series turbos. Composite leak-free sealing, works perfect with our T25/T28 & GT series oil drain/return flanges.
Fits all small & mid frame GT turbos & also T25/T28 units including:
T25, T28, GT15, GT25, GT25R, GT2554R, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071R, GTX3071R, GT3076R, GTX3076R, GT30R, GT3040R, GT3082R, GT35R, GT3582R, GTX3582R, etc.
Note:: For Large frame GT series turbos, (GT40R+) use oil return gasket in our catalog named "T & BIG GT" gasket.
$3.09THANK YOU FOR THE EXTREMELY FAST SHIPPING!! HIMNI RACING HAS GREAT PRODUCTS!!
-Eric G. Cape Coral, FL...
Read More ->
I LOVED THE SERVICE YOU GUYS GAVE ME WITH MY NEW WASTE GATE! TRULY HELPFUL AND GENEROUS. LOOK FORWARD TO BUYING MORE.
- Sheryl P. CasulA, Australia...
Read More ->
Garrett 40mm GVW-40 External Wastegate K...
Garrett 40mm GVW-40 External Wastegate K...
© Copyright 2005-2023 Himni Racing. All Rights Reserved.