Replacement Turbine / Exhaust Housing, T3 with 2.50 inch 4 Bolt downpipe outlet for Garrett GT3071R, GT3076R, GT30R, GT3082R, GT3040R using 60mm turbine wheel.
This turbine housing has a T3 undivided inlet (exhaust manifold side) with 2.50 inch 4 bolt exit. (downpipe side) Direct bolt on & replaces/upgrades your existing housing.
Installing & replacing your turbine housing is very simple. Once the turbo is removed from the car, the new housing is installed by simply removing the (6) 1/2" mounting bolts holding the turbine housing to the center cartridge. The old housing then slips right off & the new housing goes back on in the reverse order. Some applications do not require that the whole turbo even be removed from the car depending on available space & leverage. This is a 1 out of 10 in difficulty.
Turbine housings are often changed or replaced for various reasons such as:
- To allow the turbo to be used with a new application, exhaust manifold or downpipe.
- To obtain a more desirable A/R size for your application.
Select A/R from menu. Options are: .63, .82 A/R
-Compatible with the following Garrett Turbos
- GT3071R (60mm turbine wheel)
- GT3076R (60mm turbine wheel)
- GT3082R
- GTX3067R
- GTX3071R
- GEN2 GTX3071R
- GTX3076R
Also Purchased
ProductsCustomers who bought this product also purchased...
