T3 divided twin scroll turbine/exhaust housing with 3.00" V-band exhaust/downpipe outlet/exit & .82 A/R
Fits: Garrett GT28 frame turbos with the standard 53.9mm (76 trim) turbine wheel, including:
Garrett GT28RS, GT2871, GT2871R, GT2876R, GTX2860R, GT2863R, GT2867R, etc.
Installing & replacing your turbine housing is very simple. Once the turbo is removed from the car, the new housing is installed by simply removing the (6) 1/2" mounting bolts holding the turbine housing to the center cartridge. The old housing then slips right off & the new housing goes back on in the reverse order. Some applications do not require that the whole turbo even be removed from the car depending on available space & leverage. This is a 1 out of 10 in difficulty.
Turbine housings are often changed or replaced for various reasons such as:
- To allow the turbo to be used with a new application, exhaust manifold or downpipe.
- To obtain a more desirable A/R size for your application.
Also Purchased
ProductsCustomers who bought this product also purchased...
