T3 3.00" V-Band Divided Turbine Housing - GT3071R/GT3076R

T3 divided twin scroll turbine/exhaust housing with 3.00" V-band exhaust/downpipe outlet/exit. Available in .82 and 1.06 A/R.

Fits all the Garrett turbochargers below using the standard 60mm turbine wheel:
GT3071, GT3071R, GTX3071R, GTX3067R, GT30, GT3076, GT3076R, GTX3076R, GT3082R

Installing & replacing your turbine housing is very simple. Once the turbo is removed from the car, the new housing is installed by simply removing the (6) 1/2" mounting bolts holding the turbine housing to the center cartridge. The old housing then slips right off & the new housing goes back on in the reverse order. Some applications do not require that the whole turbo even be removed from the car depending on available space & leverage. This is a 1 out of 10 in difficulty.

Turbine housings are often changed or replaced for various reasons such as:
- To allow the turbo to be used with a new application, exhaust manifold or downpipe.
- To obtain a more desirable A/R size for your application.